SoundCore Anker SoundBuds Digital IE10 In-Ear Headphones A3011 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Anker SoundBuds Digital IE10 In-Ear Headphones A3011
USER MANUAL
Safety Instructions
① Avoid dropping.
② Do not disassemble.
③ Do not submerge in water.
④ Avoid extreme temperatures.
⑤ Do not use any corrosive cleaner/oil to clean.
⑥ Keep out of reach of children. It contains small parts which may be a
choking hazard.
Hearing Safety
① To avoid hearing damage, do not listen for extended periods at high volume.
② Do not turn the volume so high that you’re unable to hear your surroundings.
③ Do not use earphones while driving.
④ Use caution or temporarily discontinue use in potentially hazardous situations.
What’s Included
At a Glance
① Eartips
② In-ear hooks
③ Microphone
④ Volume up button
⑤ Multi-function button
⑥ Volume down button
⑦ Sound mode button
⑧ LED indicator
⑨ Lightning connector
Using Your SoundBuds
1. Controls
The current sound mode will remain stored and automatically recalled for next
use.
When there is an incoming call while playing music, music automatically pauses
to allow you to answer/reject the call. Once the call is ignored or ended, the
music will resume.
2. Wearing Your SoundBuds
Specifications
Specifications are subject to change without notice
| Impedance | 32Ω |
|---|---|
| Driver (full range) | 10 mm |
| Frequency response | 20 Hz – 20 KHz |
| Weight | 15 g / 0.53 oz |
Notice
CE: This product complies with the radio interference requirements of the European Community
RECYCLE: This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Made for: iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad (4th generation), iPod touch (6th generation), iPod touch (5th generation).
“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Pro, iPad Air, iPad mini, and Lightning are trademarks of Apple Inc.
DOWNLOAD
SoundCore Anker SoundBuds Digital IE10 In-Ear Headphones A3011 User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>