soundcore P20i True Wireless Earbuds User Manual

October 30, 2023
Soundcore

soundcore P20i True Wireless Earbuds A0

soundcore R50i/P20i/P25i

USER MANUAL

APP

Download on Google Playstore
Google Play and the Google Play logo are trademarks of Google Inc.

Download on Apple App store
Apple and the Apple logo are trademarks of Apple Inc.

soundcore P20i True Wireless Earbuds A1

Download the soundcore app to experience the full range of features such as gaming mode, Find Device, EQ tuning, firmware updates, and more.
If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

WEARING

Choose the ear tips that fit your ears best.

CHARGING

1. Tear off the insulation sticker on the earbuds before first use.
2. Place the earbuds in the charging case and close it.
• Fully dry off the earbuds and the USB-C charging port before charging.

3. Connect the charging case to the power supply by using a certified USB-C charging cable.
• Fully charge both the earbuds and the charging case before the first use.

POWERING ON & PAIRING

Open the charging case and take the earbuds out of the case. They will automatically power on and enter Bluetooth pairing mode.

Select soundcore R50i / P20i / P25i on your device’s Bluetooth list when connecting for the first time.
The device name may vary depending on the region.

MANUAL PAIRING

To manually enter Bluetooth pairing mode, take the earbuds out of the case, then tap and hold the touchpads on both earbuds for 3 seconds.

CONTROLS

You can also customize controls in the soundcore app.

| TWS mode| Mono mode
---|---|---
| Play / Pause| Tap twice (R)| Tap twice
Previous track| Tap and hold for 2 seconds (L)| /
Next track| Tap and hold for 2 seconds (R)| /
| Answer / End a call| Tap twice (L/R)| Tap twice
Reject a call| Tap and hold for 2 seconds (L/R)| Tap and hold for 2 seconds
| Activate voice assistant software | Tap twice (L)| /

POWERING OFF

soundcore P20i True Wireless Earbuds A7

To power off, return the earbuds to the charging case and close it.
The earbuds will automatically power off after 30 minutes if they are not connected.

 RESET

soundcore P20i True Wireless Earbuds A8

Reset if the earbuds have issues pairing with each other or with other devices.
Delete the pairing history from your Bluetooth device first. Take the earbuds out of the case. Within one minute of the earbuds powering on, tap and hold the touchpads on both earbuds for 10 seconds until you hear a notification sound.

LED LIGHT GUIDE

soundcore P20i True Wireless Earbuds A9

Flashing white
     Steady white

FIRMWARE UPDATE

You will be informed once the new version of firmware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is completed. During the update, ensure the earbuds are being charged and avoid any usage.

SPECS

Specifications are subject to change without notice.

Input 5 V 0.43A
Rated output power 5mW
Battery capacity 60mAh × 2 (earbuds);

430mAh (charging case)
Charging time| Up to 2 hours
Playtime (varies by volume level and content)| Up to 10 hours (up to 30 hours with the charging case)
Driver unit| 10mm dynamic driver
Frequency response| 20Hz – 20kHz
Impedance| 16Ω
Waterproof level (Earbuds)| IPX5
Bluetooth version| 5.3
Bluetooth range| 10m / 33ft

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals