UBIQUITI UA-Hub UniFi Access Hub Door Security Controller Instruction Manual
- June 13, 2024
- UBIQUITI
Table of Contents
UBIQUITI UA-Hub UniFi Access Hub Door Security Controller
Product Information
The UA-Hub-Door is a device manufactured by UBIQUITI. It is designed to meet the essential requirements and comply with the relevant provisions of Directives 2014/30/EU and 2014/35/EU. The device is in compliance with the EU declaration of conformity and detailed compliance information can be found at the following internet address: ui.com/compliance.
Manufacturer: Ubiquiti International Holding B.V.
Address: Ekkersrijt 3102, Son, Netherlands
Product Usage Instructions
- Installation Guide :
- Ensure that the device is installed correctly and securely.
- Refer to the installation guide for detailed instructions.
- Make sure that the device is connected to the power source. The power input should be 20mm.
- Check that all necessary connections are properly made.
- Follow the provided instructions to set up the device.
- Declaration of Conformity:
- The UA-Hub-Door complies with Directives 2014/30/EU and 2014/35/EU.
- For detailed information regarding compliance, visit the internet address mentioned above.
Safety Notices (if applicable)
- Read, follow, and keep these instructions.
- Heed all warnings.
- Only use attachments/accessories specified by the manufacturer.
WARNING: Failure to provide proper ventilation may cause fire hazard.
Keep at least 20 mm of clearance next to the ventilation holes for adequate
airflow.
WARNING: To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
WARNING: Do not use this product in location that can be submerged by
water.
WARNING: Avoid using this product during an electrical storm. There may
be a remote risk of electric shock from lightning.
Electrical Safety Information (if applicable)
- Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
- There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
- This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
- Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
- Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuitbackup protection.
- Protective bonding must be installed in accordance with local national wiring rules and regulations.
Declaration of Conformity
Hereby, UBIQUITI, declares that this device, UA-Hub-Door, is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU. The full text of the EU declaration of conformity and detailed compliance information is available at the following internet address: ui.com/compliance
Ubiquiti International Holding B.V.
Ekkersrijt 3102, Son, Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>