Holmes HAWF2021 Twin Window Fan Instruction Manual
- June 13, 2024
- Holmes
Table of Contents
Holmes HAWF2021 Twin Window Fan
Product Information
The product is a window fan with storage and fan accessories. It is designed for household use and is not intended for commercial or industrial applications. The fan has a one-year limited warranty.
Features:
-
Double-hung window fan
-
Includes extender panel for wider windows
-
Built-in extender for slider windows
-
Designed to fit windows with minimum openings of 22 inches
(55cm) wide and 10 inches (25cm) high -
Control faces inward for slider windows
Usage Instructions
- Unpack all contents of the carton.
- For double-hung windows:
- Align the window fan horizontally in the window.
- Attach the built-in extender panel to the right side of the fan housing.
- Measure the opening where the unit will be placed.
- Match your window measurement with the installation guide.
- If needed, attach the additional extender panel(s) to the left side of the fan housing.
- Set the fan in the window and lock the extender into place by pushing down the clips on the right side of the fan.
- Close the window onto the top of the fan so that the bottom edge of the window rests behind the top line of the fan housing.
- For slider windows:
- Ensure that the control faces inward, towards the window.
- Position the 7 inches (17cm) built-in extender on top.
- Measure the height of the window and adjust the upper extender for a snug fit.
- In some slider windows, you may need to remove the screen.
For warranty information and further assistance, refer to the owner’s guide or visit the website www.holmesproducts.com.
Safety instruction
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
taken including the following:
- Read all instructions before using this appliance.
- Use fan only for purposes described in the instruction manual.
- To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
- Avoid contact with moving parts.
- Do not operate in the presence of explosive and/or flammable fumes.
- To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
- Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
- Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.
- Do not use outdoors.
- To disconnect, grip plug and pull from wall outlet. Never yank on cord.
- Always use on a dry, level surface.
- Do not operate fan until fully assembled with all parts properly in place.
- This product is intended for household use ONLY and not for commercial or industrial applications. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the
proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.
FEATURES – OPERATIONS
INSTALLATION INSTRUCTIONS
Carefully unpack all contents of carton.
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM THE PACKAGE. PLEASE CHECK
PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.
- The window fan comes fully assembled and is ready for immediate installation.
- Before installation, familiarize yourself with the built-in 7 inches (17cm) extender on the right side of the fan, and the additional 4.25 inches (10cm) extender which attach to the left side of the fan housing (see Figure 1).
NOTE: WE RECOMMEND KEEPING YOUR WINDOW SCREEN IN PLACE.
This window fan has been designed to fit double-hung windows with minimum
openings of 22 inches (55cm) wide and 10 inches (25cm) high.
- Align the Window Fan horizontally in the window and the Built-In Extender Panel to the right.
- With the window open take an accurate measurement of the opening where the unit will be placed.
- Match your window measurement with the INSTALLATION GUIDE.
- Once you have attached the extender panel(s) (if needed), set the fan in the window. You will complete installation with built-in extender. Pull out both clips on right side of the fan then pull out the built-in extender. To lock extender into place, push the clips down.
- Carefully close the window onto the top of the fan so that the bottom edge of the window rests behind top line of fan housing. This helps keep the fan in place.
For slider windows (will fit windows 10 inches/25cm wide and 36 inches/91cm
high)
In a slider window, the control must face inward, towards the window. The 7
inches (17cm) built-in extender will be positioned on top. Prior to installing
unit in window, measure the height and adjust the upper extender for a snug
fit.
NOTE: In some slider windows you may need to remove the screen.
INSTALLATION GUIDE
For 22 inches (55cm) to 29 inches (73cm) : Use up to 7 inches (17cm) of
right side, pull out extender panel.
For 29 inches (73cm) to 33.25 inches (83cm) : Use one 4.25 inches (10cm)
extender panel on the left side. Adjust the pull out extender on the right
side for a tight fit (from 0.5 inches (1cm) to 7 inches (17cm) ).
Larger than 33.25 inches (83cm) : Additional extender panels will be
required (See Window Fan Accessory Section).
OPERATING INSTRUCTIONS
- Make sure rotary switch is in the OFF position.
- Plug into 120V AC electric outlet.
- To use in EXHAUST mode, manually turn the unit around in the window. (Controls can be operated from both sides.)
- To start the unit, turn the rotary switch(C) to desired speed (high or low).
WARNING: BE SURE FAN IS SECURELY INSTALLED IN YOUR WINDOW AT ALL TIMES. DO NOT LEAN OR PUSH ON FAN WHILE IT IS IN THE WINDOW.
CLEANING / MAINTENANCE
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for your window fan.
Please remember:
REPLACEABLE FUSE
If your (5 Amp, 125 Volt) replaceable fuse blows, please visit our website at
www.holmesproducts.com for information on how
to order a new fuse. Follow the below instructions to replace the fuse on the
plug.
User Servicing Instructions
-
Unplug your fan. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
-
Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.
Note: Ensure that fuse cover is completely open before attempting to remove fuse. Figure 3 -
Remove fuse carefully by using a small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse (see Figure 3).
-
Place plug on a solid, flat surface. Insert new 5 Amp, 125 Volt fuse into fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.
Caution: Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse. -
Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is secured in place completely by pressing down on metal ends of the fuse.
-
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
FAN CLEANING
- Always unplug the fan before cleaning or disassembling.
- Do not allow water to drip on or enter into the fan motor housing.
- Be sure to use a soft cloth moistened with mild soap solution.
- Do not use any of the following as a cleaner: gasoline, thinner, benzene.
Fan Blade and Front Grill Cleaning
- Make sure the fan is unplugged.
- Using a Phillips head screwdriver, remove the screws that hold the front and rear grills together. Carefully separate the front and the rear grills from the end opposite the built in extender. Do not completely detach the grills as this may damage the extender clips. Separate only enough to gain access to the blades with one hand.
- Clean blades and grills with a soft, moist cloth (see above).
- Securely fasten the grills together.
STORAGE / FAN ACCESSORIES
FAN STORAGE
For all window fans, and fans that come already assembled.
- It is important to keep it in a safe, dry location.
- We recommend using the original (or appropriately sized) box.
- Please remember to protect the fan from dust or moisture.
WINDOW FAN ACCESSORIES
To order please go to www.holmesproducts.com
If you have any questions regarding your product or would like to learn more
about other Holmes® products, please visit our website at
www.holmesproducts.com. For inquiries
regarding recycling and proper disposal of this product, please contact your
local waste management facility.
© 2015 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
WARRANTY INFORMATION
1 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in
Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer
Solutions (collectively “JCS”) warrants that for a period of one year from the
date of purchase, this product will be free from defects in material and
workmanship. JCS, at its option, will repair or replace this product or any
component of the product found to be defective during the warranty period.
Replacement will be made with a new or remanufactured product or component. If
the product is no longer available, replacement may be made with a similar
product of equal or greater value. This is your exclusive warranty. Do NOT
attempt to repair or adjust any electrical or mechanical functions on this
product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance. JCS
dealers, service centers, or retail stores selling JCS products do not have
the right to alter, modify or any way change the terms and conditions of this
warranty.
This warranty does not cover normal wear of parts or damage resulting from any
of the following: negligent use or misuse of the product, use on improper
voltage or current, use contrary to the operating instructions, disassembly,
repair or alteration by anyone other than JCS or an authorized JCS service
center. Further, the warranty does not cover: Acts of God, such as fire,
flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by
the breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or
condition of merchantability or fitness for a particular purpose is limited in
duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express,
implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the
purchase, use or misuse of, or inability to use the product including
incidental, special, consequential or similar damages or loss of profits, or
for any breach of contract, fundamental or otherwise, or for any claim brought
against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusion may not apply
to you.
This warranty gives you specific legal rights, and you may also have other
rights that vary from province to province, state to state or jurisdiction to
jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you have any questions regarding this warranty or would like to obtain
warranty service, please visit our website at
www.holmesproducts.com or direct your
correspondences to ATTN: Holmes, Jarden Consumer Solutions, PO Box 3900,
Peoria IL 61614. Please do not return product to this address. The PO Box
listed can only receive letters or envelopes.
In Canada
If you have any questions regarding this warranty or would like to obtain
warranty service, please visit our website at
www.holmesproducts.com or direct your
correspondences to ATTN: Holmes, Jarden Consumer Solutions, PO Box 3900,
Peoria IL 61614. Please do not return product to this address. The PO Box
listed can only receive letters or envelopes.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing
business as Jarden Consumer Solutions located in Jarden Consumer Solutions, PO
Box 3900, Peoria IL 61614. In Canada, this warranty is offered by Sunbeam
Corporation (Canada) Limited doing business as Jarden Consumer Solutions,
located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any
other problem or claim in connection with this product, please write our
Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE
ADDRESSES OR TO THE PLACE OF PURCHASE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>