Shenzhen Aspiron Technology ET-BH034 Wireless Headset User Manual

Shenzhen Aspiron Technology ET-BH034 Wireless Headset

KNOWING YOUR HEADSET

USING YOUR HEADSET

Charging
We highly recommend that you fully charge the headset before using for the first time.

Charge Headset with Dongle

1. Place the headset into the
2. Connect the Dongle to any USB charging port with the included cabl

Charge Headset with USB-C

• Connect the headset to any USB charging port with the included cable

Power ON/OFF

ON

• Power on & Pair:
  Hold the MFB button for Ss when it is off.

• Power on & Re-connect:
  Hold the MFB button for 3s when it is off.

OFF

• Hold the MFB button for 3s when it is on.
• Place the headset in the Dongle

Bluetooth ® Caution

• Place the two devices to be connected close to each other and turn off other Bluetooth ‘ devices.
• The maximum effective Bluetooth •· range may vary with the environ mental circumstances. Obstacles (walls, fences, etc.) between the two devices may shorten the effective range.

Using Your Headset via Dongle

1. Place the headset in the Dongle, then connect the Dongle to any USB port of PC or laptop with the included The Dongle can be used for charging now, but its Bluetooth ” ‘ function will not be enabled.
2. Take out the headset and hold the MFB button for 3s to power on, it will connect to the Dongle automatically. If the connection fails,double press the Dongle pairing button to connect. The Dongle indicator will be solid white if the connection is successful.

NOTE:

• Using the included high-speed transmission cable for connection can improve the quality and clarity of your
• If the headset and Dongle are connected, hold the pairing button for 3s to disable the Bluetooth ”’ function of the
• If the headset is out of range, the Dongle will enter link-loss mode but can be re-paired if the headset is in range again in 10

Using Your Headset via Bluetooth ®

1. Make sure the headset and your Bluetooth ” device are close to each other (within 3 feet I 1 meter).
2. When the headset is off, press and hold the MFB button for Ss to bring the headset into pairin g mode with the headset ind icator flashing red and white alt ernately.
3. Enable Bluetooth ”’ on your device and search for nearby Bluetooth ” ‘ devices.
4. Find”Headset BH034″in the search results. Tap on the name to Once connected, the indicator will flash white every 5 seconds .

NOTE :

• When you need to pair with a second device, double press the MFB button with the headset indicator flashing red and white alte rnat
• If the device Bluetooth”’ is disabled or out of range, the headset will enter pairing mode automat ically. No pairin g after 10 minutes will turn off the headset

Headset Button Operations

Function

|

Operation

---|---

Voice Assistant

|

Press and ho ld th e MFB button for 2 seconds.

Answer Calls

|

Press the MFB button once.

Reject Calls

|

Press and hold th e MFB button for 1 second.

End Calls

|

Press and ho ld th e MFB button for 1 second.

Mute Calls

|

Press the Mut e Button once. Press aga in to unmute.

Volume+/-

|

Press the Volume + / – Button

Pause/ Play

|

Press the MFB button.

Auto Re-connect

• Take off the headset from the Dongle or power off the headset.
• Press and hold the MFB button for 3S
• The headset will connect to last paired devices automatica lly.

Up to 2 devices can be connected at the same time

Restore to Factory Settings

1. Power on the headest.
2. Hold the MFB and Volume – buttons simu ltaneously for 10s in power off status .
3. Pairing history of the headset will be cleared and the headset is restored to factory

Pairing history of the Dongle will not be cleared

CLEANING AND MAINTENANCE

• Clean the earbuds and the charging case regularly.
• DO NOT clean with detergent or chemicals.
• Wipe only with a dry, soft cott on swab or equivalent
• Never insert anything into the headset.
• Keep away from sharp ob jects to avoid scratches
• Place in a dry and shady place if not in use for a long time.

TROUBLESHOOTING

Cannot Find the Headset in the Bluetooth List.

• Make sure the headset is in pairing Place the device to be connected close to the headset.
• Disable the Bluetooth function of previously paired device or remove the headset from the Bluetooth list and connect

Cannot Connect with Your Device.

• Make sure the headset is in pairing Place your device close to the headset.
• Move both devices away from other Bluetooth devices, microwaves, wireless routers, and other electronics.
• Make sure the Bluetooth function of your device is enabled before
• Remove the headset from the Bluetooth list and connect
• Reset the headset and pair again (see “Restore to Factory Settings”).

Intermittent Bluetooth Connection

• Place your device close to the headest.
• Remove the headset from the Bluetooth list and connect
• Turn off other Bluetooth devices to decrease the interference.

Cannot Turn On the Dongle.

• Make sure the Dongle is connected to any USB ports of your computer/laptop and the ports works
• Make sure the Dongle is connected with the included USB-C
• Please make sure your computer/laptop is

The Dongle Fails to Connect with the Headset.

• Make sure the headset is in pairing status (slow blinking white) and does not connect to other
• Double press the pairing button on the Dongle to enter re-connect
• If it still fails, try to put the headset in the Dongle, then take it out and try

The Headset Does Not Receive Sound.

• Set the volume to a higher connected
• Connect to the Dongle to use your Dongle
• Remove the headset from the Bluetooth list and connect

Your Voice Cannot Be Heard While On a Phone Call

• Check that the microphone is not blocked or connected
• Make sure the microphone is not muted.

The Headset Cannot Be Turned On

• Check if the battery is low. Charge the Headset with the Dongle or the USB-C

Failed to Charge the Headset.

• Place the headset in the Dongle and make sure it magnetically snaps in place.
• Make sure the Dongle is connected to an active USB port

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this
product and retain it for future reference.

HEARING SAFETY

• DO NOT wear headset with high volume for a long time to avoid damaging your hearing.
• Set the headset to low volume before you put them on, then increase the volume gradually per your preference.
• DO NOT set volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
• For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers.

CAUTION

• DO NOT expose this product to high temperatures.
• DO NOT immerse the headset into water or expose them to humidity for a long time.
• DO NOT clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
• Avoid dropping.
• Place the headset back into the charging case when not in use and keep it away from children and pets.
• Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty voidance, and/or property loss.
• DO NOT use the product in thunderstorm to avoid malfunction or electric shock.
• Always ask a professional technician or authorized personnel for repair. This product contains lithium battery. Never expose it to excessive heat such as direct sunlight or fire to avoid explosion.

© Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This product is covered with TaoTroincs product and labor warranty for 12 months from the date of its original purchase.

The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.
• Any unit that has been tampered with or used for commercial purpose.
• Normal wear and tear of wearable parts.
• Use of force, damage caused by external influences.
• Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
• Partially or completely dismantled appliances.
• Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by TaoTroincs.

We can only provide after-sales service for products that are sold by TaoTroincs or TaoTroincs authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

Please have your invoice and order ID ready before contacting Customer Support

WEEE COMPLIANCE
Correct Disposal ofThis Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

techsupport@tyutech.com

Manufacturer : Shenzhen Aspiron Technology Company LimitedAddress: 3rd Floor, Yiben Building, No. 1063 Chaguang Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China

MADE IN CHINA

Documents / Resources

| Shenzhen Aspiron Technology ET-BH034 Wireless Headset [pdf] User Manual
ET-BH034, ET-BH034 Wireless Headset, Wireless Headset, Headset
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>