Holmes 12081 Blizzard Table Fan Instruction Manual

Holmes 12081 Blizzard Table Fan Instruction Manual

FEATURES – OPERATIONS

OPERATING INSTRUCTIONS

1. Set fan on a dry, level surface.

2. Make sure the Speed Control Knob is in the Off(0) position. Plug cord into any standard 120 volt AC outlet.

3. The Speed Control Knob is located on the back of the fan motor housing. The speed is adjusted by turning the Speed
   Control Knob to the desired setting, OFF-(O), HIGH-(III), MEDIUM-(II), LOW-(I).

4. The Oscillation Control Knob is located on top of the fan motor housing. To start oscillation, push control knob down.
   To stop oscillation, pull control knob up.

WALL MOUNTING INSTRUCTIONS

This Blizzard® table fan can be wall mounted and is designed to operate from 4 different positions while wall mounted. The first 3 positions are set by gently pushing the fan head to the desired location. To set the fan in the fourth and furthest back position, press down firmly on the wall mount lock at the back of the fan neck with one hand, while pushing the fan head back into the fourth position with your other hand. Please Note: When taking the fan down from the wall and changing to table fan operation, make sure to pull the fan head forward out of the fourth wall-position. Pull gently forward until you hear the wall mount lock secure the fan back into table mode. You will then have the 3 standard table fan positions available to choose from. Step 1: After selecting a suitable location on the wall, use the corresponding mounting location guide below to ensure
proper placement.
Step 2: Use the holes below as a guide and mark the correct place where the screws will be inserted. Consult with a
Hardware or Home Center Professional for the best screws for your type of wall.
NOTE: Please be sure that you use the correct mounting location guide for your particular fan. The model number can
be located on the box or on the rating label which is located on the back of the fan head.
Step 3: Secure the screws almost all the way into the wall using a screwdriver. Step 4: Line up the holes on the back of the unit with the screws to hang the fan. Make sure the screws are secured into
the wall before carefully placing the fan on them.
MOUNTING LOCATION GUIDE FOR MODEL#32510134
Use this diagram to help properly line up screws.

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

1. Read all instructions before using this appliance.
2. Use fan only for purposes described in this instruction manual.
3. To protect against electrical shock do not immerse unit, plug, or cord in water, or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
4. Close supervision is necessary when any appliance is used near children.
5. Not intended for use by children.
6. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
7. Avoid contact with moving parts.
8. Do not operate in the presence of explosive and/or flammable fumes.
9. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
10. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or contact customer service for examination and/or repair.
11. Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
12. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
13. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.
14. Do not use outdoors.
15. To disconnect, grip plug and pull from wall outlet. Never yank on cord.
16. Always use on a dry, level surface.
17. Do not operate fan until fully assembled with all parts properly in place.
18. This product is intended for household use ONLY and not for commercial or industrial applications.
19. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.
20. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
21. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or customer service should be contacted for examination and/or repair.

PLEASE READ AND SAVE THESE IMPORTANT
SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

ASSEMBLY INSTRUCTIONS

This Table Fan comes completely assembled and is ready for immediate use. Carefully unpack the fan, refer to the operating instructions and enjoy!

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for this table fan.

REPLACEABLE FUSE

If the (2.5 Amp, 125 Volt) replaceable fuse blows, please visit our website at www.getholmesfans.com for information on how to order a new fuse. Follow the user servicing instructions to replace the fuse on the plug.

User Servicing Instructions

1. Unplug the fan. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

2. Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.
   NOTE: Ensure that fuse cover is completely open before Figure 3 attempting to remove fuse.

3. Remove fuse carefully by using Fuse cover a small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse. (see Figure 3) Metal ends

4. Place plug on a solid, flat surface. Insert new 2.5 Amp, 125 Volt fuse into fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.
   CAUTION: Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

5. Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is secured in place completely by pressing down on metal ends of the fuse.

6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

FAN CLEANING

• Always unplug the fan before cleaning or disassembling.
• Be sure to use a soft cloth moistened with a mild soap solution.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner, benzene.
• It is recommended to periodically clean this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit.

FAN STORAGE

This fan can be stored in the off-season in the original (or appropriately sized) box. It is important to keep it in a safe, dry location.
For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.

1 YEAR LIMITED WARRANTY

This device has a limited warranty of 1 year from the original date of purchase against workmanship and defects in material. If under normal use, your product fails to operate, please contact our customer service department at info@getholmesfans.com. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.

Warranty Service
Contact our customer service at getholmesfans.com/en/contact-us or info@getholmesfans.com or 1-866-769-3166 (8:30 am – 5:00 pm EST) Monday-Friday. Our team will be happy to assist. www.getholmesfans.com

© 2022 Sunbeam Products, Inc. All rights reserved. HOLMES® and BLIZZARD® are registered trademarks of Sunbeam Products, Inc. used under license. Distributed by Star Elite Inc., Montreal, Canada H3B 3X9 SEH021-092022
Printed In China

References

• Contact Us | Holmes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>