Holmes 32510056 40 Inch Digital Tower Fan Instruction Manual

: June 13, 2024
: Holmes

Holmes 32510056 40 Inch Digital Tower Fan Instruction Manual

MOBILE APP INSTRUCTIONS

When the fan is successfully found by Bluetooth®, click the green “+” on the fan icon that
Enter your Wi-Fi name and password.
Wait for the connection to be established (green checkmark), then press
Press done (top right-hand corner). The fan is now available to control from your

CONTROLLING THE FAN WITH THE HOLMES® APP

The Holmes® App has the same functionality as the remote control, as well as additional features.

Power
Fan Speed
Oscillation
Mode
Timer
Schedule

Note: The control panel display on the tower fan will change to match the setting selected in the app.

POWER: Press to turn ON/OFF
SPEED: Slide your finger across the speed level scroll bar to increase or decrease fan
OSCILLATION: Press to turn ON/OFF.
MODE: Press icons to select preferred

Normal – Steady Fan Speed
Sleep – Low Fan Speed
Breeze – Alternating Fan Speed
Power Breeze – Maximum Air Velocity

5. TIMER:

To set your fan for auto-shutoff, select a run-time from 1 hour to 15 hours.

The default setting is 1
Choose the number of hours from the

. SCHEDULE

To Set Schedule:

Press Schedule.
Select Add on the next page.
Select the time of day the fan should turn on or Be sure to choose the hour and minutes.
Click on “Repeat” and select which day of the week the schedule will be
Click “Power” and select whether the fan should turn on or
Click “save” to save selection and
Your saved schedule will appear on the Schedule
To turn OFF the schedule, pressthe slider button to the right. It will change from red to gray to indicate the schedule is off. To turn ON the schedule, press the slider button again. It will change from gray to green to indicate the schedule is ON.

VOICE ASSISTANT INSTRUCTIONS

SETTING UP VOICE ASSISTANT

To pair the Tower Fan with Amazon Alexa and Google Voice Enabled Devices:

Open the Holmes®
Select the device you wish to connect to a voice
In the top right corner of the screen select the pencil
Choose the icon of the Voice Assistant you wish to
Follow the instructions that appear.

Voice Assistant Functionality

Use the following command sequence for Amazon Alexa enabled devices: “Alexa, “Primary Command” + “Device Name” + “Secondary Command”(if applicable). For example, “Alexa, Activate Holmes® Fan” or “Alexa, Turn Up Holmes® Fan speed by 3”.
Use the following command sequence for Google Assistant enabled devices: “Hey Google, “Primary Command”

Device Name” + “Secondary Command”(if applicable) For example, “Hey Google, Activate Holmes® Fan” or “Hey

Google, Turn Up Holmes® Fan speed by 3”.

| | Action| Command
---|---
Turn the fan On| “Activate,” “Power On,” “Turn on,” “Start”
Turn the fan Off| “Power Off,” “Turn Off,” “Deactivate,”
Increase the speed| “Turn Up,” “Raise,” “Increase”, “Set the fan speed to ” (1,2 or 3)
Decrease the speed| “Turn Down,” “Lower,” “Decrease”, “Set the fan speed to ” (1,2 or 3)
Set the timer| “Set Countdown to hours” (choose between 1-15 hours)
Oscillation On| “Turn On Oscillation,” “Start Oscillation,” “Activate Oscillation”
Oscillation Off| “Turn Off Oscillation,” “Stop Oscillation,” “Deactivate Oscillation”
Mode| “Set Mode to Normal” “Set Mode to Breeze” “Set Mode to Sleep” “Set Mode to Power Breeze”

Note: The default “Device Name” is “Holmes® Fan”. To personalize the device name, see below.

PERSONALIZING THE DEVICE NAME

To personalize the fan name for easier voice commands:

Open the Holmes®
Select the product name you wish to
Select the pencil icon in the top right corner.
On the following screen, click on or tap the name of the
Tap the current name of the
Rename the product and press

Note: The name will automatically update for both Amazon Alexa and Google Voice Enabled Devices.
Google, Google Play and Google Home are trademarks of Google LLC.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. App Store is a service mark of Apple Inc.

CLEANING AND MAINTENANCE

REPLACING THE PLUG FUSE

If your (5 Amp, 125 Volt) replaceable fuse blows, please visit our website at www.getholmesfans.comfor information on how to order a new fuse. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

Unplug the Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide
Remove fuse carefully by using a small screwdriver to pry the fuse from the compartment by themetal ends of the fuse. (see Figure 6)
Place plug on a solid, flat Insert new
Amp, 125 Volt fuse into fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.
CAUTION: Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
If fuse cover is difficult to close, make sure fuse is secured in place completely by pressing the metal ends of the fuseSlide fuse cover closed completely.
Risk of fire. Do not replace attachment Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

CLEANING

Always unplug the fan before
Do not allow water to drip on into fan
Be sure to use a soft cloth moistened with a mild soap
Do not use gasoline, thinner or benzene as a

Clean the fan grill, housing and base with a soft, damp cloth.
Do not attempt to remove the fan blade. Please use caution around the motor housing area. Do not allowthe motor or other electrical components to be exposed to water

FCC STATEMENT WARRANTY INFORMATION

FCC STATEMENT

Potential for Radio/Television interference

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that the interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.
Increase the separation between the product and the

Connect the product into an outlet on a circuit different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for
Changes or modifications not expressly approved by the party responsible for compliance could void the urer’r authority to operate the

3 YEAR LIMITED WARRANTY

This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in material. If under normal use, your product fails to operate, please contact our customer service department at info@getholmesfans.com. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may deny claimr of damage caured by mirure or modificationr of thir product.

Warranty Service

Contact our customer service at www.getholmesfans.com/en/contact- usor info@getholmesfans.com or 1-866-769-3166 (8:30 am – 5:00 pm EST) Monday-Friday. Our team will be happy to assist.www.getholmesfans.com
© 2022 Sunbeam Products, Inc. All rights reserved.
HOLMES® is a registered trademark of Sunbeam Products, Inc. used under license.
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9 SEH020-120822

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

Read all instructions before using this
Use fan only for purposes described in the instruction This fan is not for continuous operation or equivalent.
To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical
Close supervision is necessary when any appliance
Not intended for use by children
Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before
Avoid contact with moving
Do not operate in the presence of explosive and/or flammable
To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating
Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any Discard fan or contact customer service.
Do not run cord under Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
The use of attachments not recommended or sold by the appliance manufacturer may cause
Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic
Do not use
To disconnect, grip plug and pull from wall Never yank on cord.
Always use on a dry, level
This product is intended for household use ONLY and not for commercial or industrial
WARNING: To reduce the risk of electrical shock and injury to persons, do not use in
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or contact customer service.

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

Do not obstruct the airflow with any objects or place anything inside the fan
Do not use in extreme temperatures, humidity, or dusty
Do not place any objects on the
Do not place the fan directly below a power outlet or you risk the cord being sucked
When the fan is oscillating do not manually turn the fan to avoid

This appliance is not intended for use by persons (including children) with reduced physical, sensory
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

WARNING: Chemical Burn Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/ coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

PAR TS AND ASSEMB LY

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

ASSEMB LY AND OPERATING INSTRUCTIONS

ASSEMBLY

Estimated assembly time: 5-10 minutes No tools required.

NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.

Align and press together the base halves (figure 2).
Remove the lock nut from the fan housing by rotating counterclockwise (Figure 2, 3).
Place the base onto the bottom of the fan housing and rotate to
Place the lock nut onto the bottom of the base and rotate clockwise to tighten (Figure 3).
Place fan upright on a dry, level

OPERATING INSTRUCTIONS (Figure 4)

Plug the cord into a standard 120 Volt AC
To turn the fan ON, press the POWER button (A) located on the control panel or remote The fan will start running in the lowest setting “I” (LOW).
Press the SPEED button (C) to cycle through the 3 speed settings in

The corresponding indicator light will illuminate to confirm the selection:
I-Low II-Medium III-High

REMOTE CONTROL AND MOBILE APP INSTRUCTIONS

REMOTE CONTROL

NOTE: THIS UNIT INCLUDES ONE LITHIUM BATTERY, CR2025/3V. PLEASE REMOVE THE PROTECTIVE PLASTIC FROM THE REMOTE CONTROL BATTERY BEFORE OPERATION.
To operate the fan with the remote control, aim it towards the control panel on top of the fan tower. The remote control can operate from a distance up to approximately 16 feet from the fan body and at an angle variation of 15-20 degrees.
Avoid exposing the display panel to direct sunlight, as itmay interfere with signal transmission.
Replacing the Remote Control Battery (Figure 5) The cells should be disposed of properly, including keeping them away from children. Even used cells may

Locate the battery compartment on the back of the remote control Press tab and pull out battery.

Remove old

Place new battery into battery
Slide battery compartment into the remote control NOTES:
Remove the battery from the remote when it is not in use for an extended
Remove the battery

before discarding the remote at the end of its useful product life.

Do not discard used batteries into household trash Contact your local government for disposal or recycling practices in your area.

SETTING UP THE HOLMES MOBILE APP

Note: A 2.4 GHz Wi-Fi network is required.

Download the Holmes® App from Google Play, the Apple App Store or the QR code located on the back of this Instruction Manual.
Create an account by following the steps in the
Enter the verification code you received to confirm your account and create a
Select “Add Device” or the plus (+) sign in the top right

Auto Pairing (Recommended Method)

Ensure Bluetooth®, Wi-Fi, and GPS are activated on your mobile
Press and hold the OSC/WIFI PAIRING button on the fan’s control panel for 5 seconds, until an audible beep is heard and the red

indicates the device is in pairing mode. Note: if pairing is not
completed within 2-3 minutes, the device will exit pairing mode and step 2 will need to be repeated.

Select “Auto Scan” at the top of the

You should see an icon for the fan that has been found.

Click “Next.”
Input your Wi-Fi name and
Wait for the connection to be
Press “Done” (top right-hand corner).

Your fan is now available to control from your smartphone.

Manual Pairing

If Auto Pairing is unsuccessful:

Ensure Bluetooth®, Wi-Fi, and GPS are activated on your mobile
Ensure the fan has been powered off for 10 seconds or more, then power on the
Press and hold the OSC/WIFI PAIRING button on the fan’s control panel for 5 seconds, until the red indicator light is flashing. The device is now in pairing Note: if pairing is not completed within 2-3 minutes, the device will exit pairing mode and step 3 will need to be repeated.

On your mobile device, click “add device”, then select “add manually” at the top of the screen. Click the fan icon

Read More About This Manual & Download PDF: