JBL REFLECTFLOWPRO Waterproof True Wireless Earbuds User Guide
- June 13, 2024
- JBL
Table of Contents
- JBL REFLECTFLOWPRO Waterproof True Wireless Earbuds
- Product Information
- Product Usage Instructions
- WHAT’S IN THE BOX
- APP
- how to wear
- power on & CONNECT
- Controls
- MANUAL SETUP
- HANDS-FREE VOICE CONTROL
- Charging
- TECH SPEC
- IC RF Exposure Information and Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL REFLECTFLOWPRO Waterproof True Wireless Earbuds
Product Information
- Model: JBL Reflect Flow Pro
- Driver Size: 6.8 mm / 0.27 inches
- Power Supply : 5V 1A
- Earbud Weight : 7.2 g / 0.016 lbs per piece (14.4 g / 0.032 lbs combined)
- Charging Case Weight: 61.5 g / 0.136 lbs
- Earbud Battery Type: Li-Polymer (85 mAh / 3.7 V)
- Charging Case Battery Type : Li-Polymer (540 mAh / 3.85 V)
- Charging Time: 2 hours from empty
- Music Playtime with Bluetooth on and ANC off: up to 10 hours
- Music Playtime with Bluetooth on and ANC on : up to 8 hours
- Frequency Response: Not specified
- Impedance: 16 ohms
- Sensitivity: 100 dB SPL @ 1 kHz
- Maximum SPL: 94 dB
- Microphone Sensitivity: -38 dBV/Pa @ 1 kHz
- Bluetooth Version: 5.0
- Bluetooth Profile Version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth Transmitter Frequency Range: 2.4 GHz – 2.4835 GHz
- Bluetooth Transmitter Power: 10 dBm
- Bluetooth Transmitter Modulation: GFSK, /4 QPSK, 8DPSK
- Maximum Operation Temperature: Not specified
Product Usage Instructions
How to Wear
- Mix and match the ear tips (S/M/L) for a perfect fit and audio performance.
- Choose the appropriate ear fins size (XS/S/M/L) for a secure fit.
First Time Use:
- Power on the earbuds and put them in pairing mode.
- Go to the Bluetooth settings on your device and connect to “JBL RFL FLOW PRO”.
- If prompted for a passcode, enter “0000” or “1234”.
Controls:
- HOLD (2S): Enable advanced controls by connecting your JBL Reflect Flow Pro to the JBL Headphones App.
- *ANC:** Toggle Active Noise Cancellation.
- *Ambient Aware:** Toggle Ambient Aware mode.
- *TALKTHRU:** Toggle TalkThru mode.
- Auto Play/Pause: Automatically pause/play music when removing/inserting the earbuds.
- POWER OFF: Turn off the earbuds.
Charging:
Charge the earbuds through a Qi-CERTIFIED wireless charging pad (not
included).
Do More with the App:
Download the JBL Headphones App to get even more control and
personalization of your listening experience.
Hands-Free Voice Control:
- Use voice commands with your preferred voice assistant (Google
- Assistant or Alexa) through the JBL Headphones App.
Note: Some features are only available on AndroidTM devices and require AndroidTM 6.0 or higher.
WHAT’S IN THE BOX
APP
JBL Headphones
- GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.
how to wear
Mix and match for a perfect fit and audio performance
First time use
power on & CONNECT
DUAL CONNECT + SYNC
Controls
-
- Enable advance controls by connecting your JBL reflect FLOW PRO to JBL Headphones App .
- ** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
Auto Play/Pause
POWER OFF
MANUAL SETUP
- Connect to a NEW Bluetooth device
- RECONNECT LEFT & RIGHT
- REBOOT
DO MORE WITH THE APP
HANDS-FREE VOICE CONTROL
- Get more done on the go. Say “Ok Google” to get started.
- “Play my Workout playlist”
- “Turn up the volume”
- “Send a message”
- “What’s my schedule today?”
- “Set an alarm for 7 AM”
Note: Only available on Android™
HANDS-FREE VOICE CONTROL
Ask Alexa to play music, answer questions, play the news, check the weather,
set alarms, control compatible smart home devices, and more.
- “Alexa, play today’s hits”
- “Alexa, volume up.”
- “Alexa, skip this song.”
- “Alexa, what’s the weather?”
- “Alexa, turn off the TV.”
- “Alexa, start my commute”
Note: AndroidTM 6.0 or higher is required for full access to Alexa features when using this device.
Charging
Charging through A Qi-CERTIFIED wireless charging pad (NOT INCLUDED)
led behaviors
TECH SPEC
- Model: REFLECT FLOW PRO
- Driver Size: 6.8 mm/ 0.27” Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 7.2 g per pc (14.4 g combined)/ 0.016 lbs per pc (0.032 lbs combined)
- Charging case: 61.5 g/ 0.136 lbs
- Earbud battery type : Li-Polymer (85 mAh/ 3.7 V)
- Charging case battery type: Li-Polymer (540 mAh/ 3.85 V)
- Charging time: 2 hrs from empty
- Music playtime with BT on and ANC off: up to 10 hrs
- Music playtime with BT on and ANC on: up to 8 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 100 dB SPL@1 kHz
- Maximum SPL: 94 dB
- Microphone sensitivity: -38 dBV/Pa@1 KHz
- Bluetooth version : 5.0
- Bluetooth profile version : A2DP V1.3 AVRCP V1.6 HFP V1.7
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: 10 dBm
- Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK
- Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
- The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
- Device types: (IC: 6132A-RFLOWPRO) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.125W/Kg.
- The device was tested for typical bodily operations where the product was kept 0 mm from the head.
- To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset.
- The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly.
- Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
- The device was subjected to a typical head manipulation test.
- In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna).
- Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided.
- Use only the supplied or approved antenna.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
- Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.
- Google, Android and Google Play are trademarks of Google LLC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>