Holmes 32510024 32 Inch Tower Fan Instruction Manual
- June 13, 2024
- Holmes
Table of Contents
Holmes 32510024 32 Inch Tower Fan
Product Information
The product is a 32-inch Tower Fan with a remote control. It is manufactured by Star Elite Inc. and has a limited warranty of 3 years from the original date of purchase against workmanship and defects in material.
Product Features:
- 32-inch tower fan
- Comes with a remote control
- Replaceable fuse for safety
- Cleaning and maintenance instructions
Product Usage Instructions
Cleaning and Maintenance:
Follow these instructions to safely and correctly care for your fan.
- Do not allow the motor or other electrical components to be exposed to water.
Replacing the Fuse:
-
Unplug your fan. Grasp the plug and remove it from the receptacle or other outlet device. Note: Do not unplug by pulling on the cord.
-
Open the fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover towards the prongs.
Note: Ensure the fuse cover is completely open before attempting to remove the fuse. -
Remove the fuse carefully by using a small screwdriver to pry it from the compartment at the metal ends of the fuse. (See Figure 5 in the manual)
-
Place the plug on a solid, flat surface. Insert a new 5 Amp, 125 Volt fuse into the fuse compartment. Use a small screwdriver to secure the metal ends of the fuse into the compartment.
Caution: Risk of fire. Replace the fuse only with a 5 Amp, 125 Volt fuse. -
Slide the fuse cover closed completely. Note: If the fuse cover is difficult to close, make sure the fuse is completely secured in place by pressing on the metal ends of the fuse.
-
Caution: Risk of fire. Do not replace the attachment plug. It contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.
Warranty Information:
This product comes with a 3-year limited warranty from the original date of
purchase against workmanship and defects in material. If your product fails to
operate under normal use, please contact the customer service department at
info@getholmesfans.com. A refund or
replacement will be provided with proof of purchase. Claims of damage caused
by misuse or modifications will be denied. To obtain warranty service, do not
contact the store. Contact customer service at
1-866-769-3166 (8:30 am – 5:00 pm EST)
Monday – Friday or email them at
info@getholmesfans.com. They will be happy to
assist you.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
taken including the following:
-
Read all instructions before using this appliance.
-
Use fan only for purposes described in the instruction manual. This fan is not for continuous operation or equivalent.
To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
Close supervision is necessary when any appliance is used by or near children. -
Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
-
Avoid contact with moving parts.
-
Do not operate in the presence of explosive and/or flammable fumes.
-
To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or contact customer service. -
Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
-
The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
-
Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.
-
Do not use outdoors.
-
To disconnect, grip plug and pull from wall outlet. Never yank on cord.
-
Always use on a dry, level surface.
-
Do not operate fan until fully assembled with all parts properly in place.
-
This product is intended for household use ONLY and not for commercial or industrial applications.
-
WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.
-
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
-
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or contact customer service.
WARNING: Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used
lithium button/coin cell battery is swallowed or enters the body, it can cause
severe internal burns and can lead to death in as little as 2 hours. Always
completely secure the battery compartment. If the battery compartment does not
close securely, stop.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the
proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.
PARTS, FEATURES AND ASSEMBLY
using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
- A. Control Panel / LED Display
- B Fan Housing
- C. Base Halves
- D. Remote Control Storage
- E. Remote Control
ASSEMBLY – OPERATIONS
ASSEMBLY INSTRUCTIONS: (SEE FIGURE 1 & 2)
Estimated assembly time : 5-10 minutes
Tool- Free , 2 thumb screws included
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.
- Assemble base halves around power cord. To secure the base halves together, slide the posts of one base half into the slots of the second base half. Refer to Figure 2.
- Line up the screws holes of the base halves with the holes located on the bottom of the fan housing. Secure with the two screws included with the product. Refer to Figure 2.
- Secure power cord as shown in Figure 2.
- Turn fan right side up and place on a dry and level surface.
OPERATING INSTRUCTIONS: (SEE FIGURE 3)
- Plug the cord into a standard 120 volt AC outlet.
- To turn the fan on, press the power button located on the control panel or remote control. The fan will start running in the lowest setting “1” ( Low ).
- Press the speed button to cycle through the below 3 speed settings in sequence. The corresponding indicator light will illuminate to confirm the selection:
- 1- Low
- 2- Medium
- 3- High
- To turn the oscillation on and off, press the oscillation button located on the control panel or remote control. The oscillation Indicator light will illuminate on the Control Panel.
- To set your fan to automatically shut off, press the timer button located on the control panel or the remote control. When set, the fan will run and automatically shut off after the set duration of time (1-8 hours) has expired.
- To activate the breeze mode press the sleep/ breeze mode button located on the control panel or remote control. When turned on, the fan will randomly cycle through the three speeds settings recreating a natural outdoor breeze. To activate sleep mode , press the mode button again. This function slows the fan speed down, and when used in conjunction with the timer settings, will ultimately turn the fan off.
- To turn the fan off press the power button ( ) located on the control panel or remote control.
NOTE: Your fan features a LED display panel. When a specific feature is activated on your fan, the LED panel will illuminate with the corresponding icons showing which features have been activated.
FEATURES – OPERATIONS FCC STATEMENT
REMOTE CONTROL:
NOTE: REMOVE THE PROTECTIVE STICKER FROM THE REMOTE CONTROL BATTERY
BEFORE OPERATION. This unit includes one lithium battery, CR2025/3V. Remove
battery before discarding the remote. Battery Replacement (SEE FIGURE 4)
The cells should be disposed of properly, including keeping them away from children and pets. Even used cells may cause injury.
- Locate the battery compartment on the bottom back of the remote control handset. Press the tab and pull open the battery tray.
- Remove old battery.
- Place new battery into battery compartment.
- Slide battery compartment into the remote control handset.
NOTES:
- Remove the battery from the remote control when it is not being used for an extended period of time.
- Do not discard used batteries into household trash containers. Contact your local government for disposal or recycling practices in your area.
- Remove the battery before discarding the remote.
FCC STATEMENT
Potential for Radio/Television interference This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not
occur in a particular installation. If the product does cause harmful
interference to radio or television reception, which can be determined by
turning the product on or off, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and the receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CLEANING AND MAINTENANCE
USER SERVICING INSTRUCTIONS
Follow these instructions to safely and correctly care for your fan.
REPLACEABLE FUSE
If your (5 Amp, 125 Volt) replaceable fuse blows, please visit our website
at www.getholmesfans.com for information on
how to order a new fuse.
REPLACING THE FUSE
-
Unplug your fan.
Grasp plug and remove from the receptacle or other outlet device.
NOTE: Do not unplug by pulling on cord. -
Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover towards the prongs.
NOTE: Ensure the fuse cover is completely open before attempting to remove fuse. -
Remove fuse carefully by using a small screwdriver to pry it from the compartment at the metal ends of the fuse. (See Figure 5)
-
Place plug on a solid, flat surface. Insert new 5 Amp, 125 Volt fuse into fuse compartment. Use a small screwdriver to secure the metal ends of the fuse into the compartment.
CAUTION: Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse. -
Slide fuse cover closed completely.
NOTE: If fuse cover is difficult to close, make sure the fuse is completely secured in place by pressing on metal ends of the fuse.
CAUTION: Risk of fire. Do not replace the attachment plug. It contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
FAN CLEANING
- Always unplug the fan before cleaning.
- Wipe the fan grill, housing and base with a soft, damp cloth.
- Do not allow water to drip on or into the fan housing.
- Use only a soft cloth moistened with a mild soap solution.
- Do not use harsh chemicals such as gasoline, thinner or benzene as a cleaner.
- Do not attempt to remove the fan blade.
- Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.
FAN STORAGE
- Store the fan in a clean, dry location between seasons or when not in use for an extended period.
- Keep the fan head protected from dirt and dust during storage.
- Remove battery from the remote-control before storage or disposal.
If you have any questions regarding your product or would like to learn more
about other Holmes® products, please visit our website at
www.getholmesfans.com or call customer
service: 1-866-769-3166 (8:30 am – 5:00
pm E.S.T.) or send an email to
info@getholmesfans.com. For inquiries
regarding recycling and proper disposal of this product, please contact your
local waste management facility.
WARRANTY INFORMATION
3 YEAR LIMITED WARRANTY
This device has a limited warranty of 3 years from the original date of
purchase against workmanship and defects in material. If under normal use,
your product fails to operate, please contact our customer service department
at info@getholmesfans.com. A refund or
replacement will be provided to you with proof of purchase. Star Elite Inc.
may deny claims of damage caused by misuse or modifications of this product.
How to Obtain Warranty Service
If you have any problems, please do not contact the store.
Contact our customer service at
1-866-769-3166 (8:30 am – 5:00 pm EST)
Monday – Friday or contact us at
info@getholmesfans.com.
Our customer service will be happy to assist you.
www.getholmesfans.com
FCC Notice :
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
© 2021 Sunbeam Products, Inc. All rights reserved.
HOLMES® is a registered trademark of Sunbeam Products, Inc. used under
license. Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH011-112221
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>