MEAN WELL APC-35-350 Switching Power Supply Owner’s Manual

35W Single Output Switching
Power Supply
APC-35 series

GTIN CODE
MW Search: https://www.meanwell.con’serviceGTIN.aspx

Features

• Constant current mode power supply
• Universal AC input / Full range
• Withstand 300VAC Surge input for 5 seconds
• Protections:Short circuit / Over voltage
• Fully isolated plastic case
• Small and compact size
• Cooling by free air convection
• IP42 design
• 100% full load burn-in test
• Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)(Note.6)
• Low cost / High reliability
• 2 years warranty

SPECIFICATION

230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| 0.25mA / 240VAC
PROTECTION| OVER VOLTAGE| 110 – 130V| 1 77 – 91V| 1 55 – 65V| 1 36 – 43V
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| -30 – 70 C (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 – 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 – +80t , 10 – 95% RH
TEMP. COEFFICIENT| ±0.2%/C (0 – 50 C )
VIBRATION| 10 – 500Hz, 26 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY &
EMC (Note 5)| SAFETY STANDARDS| UL8750 (only for APC-35-70081050), CSA-C22.2 No. 250.0-13 (only for APC-35-1050), BIS IS15885(only for APC-35-700&1050), EAC TP TC 004,IP42, BS EN/EN 62368-1 approved
WITHSTAND VOLTAGE| I/P-0/P:3KVAC
ISOLATION RESISTANCE| I/P-0/P:>100M Ohms / 500VDC / 25 C170% RH
EMC EMISSION| Compliance to BS EN/EN55032,BS EN/EN61000-3-2 Class A,BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS ENIEN55035,BS EN/EN61000-4-2,3,4,5,6,8,11: light industry level(surge 2KV), EAC TP TC 020
OTHERS| MTBF| 4955.9K hrs min. Telcordia SR-332 (Bellcore); 550.4K hrs min. MIL-HDBK-217F (25(2)
DIMENSION| 84’57’29.5(121TH)
PACKING| 0.18Kg; 72pcs114Kg/0.92CUFT
NOTE| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.Derating may be needed under low input voltage. Please check the static characteristic for more details.
3.The power supply is considered as a component that will be operated in combination with final equipment Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
4.The ambient temperature derating of 3.5°C/1000m with fatless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(65001t).
5.For any application note and IP water proof function instatation caution, please refer our user manual before using. https://www.meanwell.com/Upioad/PDF/LED_EN.pdf
6.This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LPF/NPF/YJ_G series are recommended.) x Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Mechanical Specification

Block Diagram

Derating Curve

Static Characteristics

File Name: APC-35-SPEC 2023-02-10

http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf

Documents / Resources

| MEAN WELL APC-35-350 Switching Power Supply [pdf] Owner's Manual
APC-35-350 Switching Power Supply, APC-35-350, Switching Power Supply, Power Supply
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>