Glow Worm HSA1SR LED Light Strip User Manual
- June 13, 2024
- Glow-Worm
Table of Contents
HSA1SR LED Light Strip
User Manual
What’tin the Box?
Description
The TV backlight is controlled by the HDMI 2.0 sync Sticker, which detects relevant RGB and intelligently inputs them into the algorithm for automatic color reproduction, creating much more complex and creative l屯hting patterns. The HDMI 2.0 sync Sticker is slim and sleek, supporting a maximum resolution of up to 4K@60Hz. Brace urself for an epic adventure as the lights bring color and rhythm to your surroundings for a more enjoyable experience. Furthermore, a variety of additional lighting synchronization options are available, forming an immersive ecosystem for your personal home theater.
HDMl2.0 Sync Sticker Features
Installation
Install the LED Strips to the bai::k of your TV
-
Clean the back of your TY.
-
Locate HDMI ports
-
Remove the adhesive tape
-
Stick the LED strip lights, ALWAYS sart from the BOTTOM.
It is recommended to install the light strip in the position close to the HDMI port on the television. -
If the HDMI port of TV i5 on the lift,stick the LED strip lights as shown in the picture below.
If the HDMI port of TV is on the right, stick the LED strip lights as shown in the picture below. 
-
Firmly press the light strip into place.
-
If the LED strip is too long, it can be cut to fit the size of your television.
-
connect the HDMI 2.0 sync Sticker to the TV (the sticker output plugs into the TV HDMI port).
• Connect the light strip to the LED s廿ip port of the HDMI 2.0 Sync Sticker.
·Connect the HDMI source (TV box, laptop, switch, or Xbox) to the HDMI input of the HDMI 2.0 Sync Sticker.
• Connect the power cable to the HDMI 2.0 Sync Sticker, and plug it into the power adaptor.
If the colors do not match the Screen, dip the L/R
Switch Button once to calibrate and color sync the LED lights.
Light Control
- control via the HDMI 2.0 sync Sticker .
Button| Status
---|---
Power On/Off| Press for ON/OFF. Long press for above Ssec to power off
Switch button| Press to switch mode. (Sync mode ->Music Mode-> Rainbow-> Sync mode)
L/R Switch w Button| Slide to select L/R installation direction - Control via the LED strip Controller
LED Strip ON/OFF button| Press for mode switch(Sync mode-> Music Mode-> inbow-> Sync mode),
long press for above 3sec to power ON/OFF
---|--- - Indicator
Indicator| Status
---|---
Hdml Input LED Indicator| ON: conneted
Off: Check the connection
Hd mi output LEDIndicator| On-I: conneted
Off: Check tne connection
LED strip oontroller Indicator| OFF: Led strip is powered on
Or-I: Led Strip is powered off
Notice
- The HOMI 2.0 Sync Sticker supports up to 4K/60HZ sources
- we recommend storing the HDMI 2.0 Sync Sticker in a dry, well-ventilated area away from damp or humid areas.
- It is normal for the HDMI 2.0 Sync Sticker to get warm after a few hours of usage.
- The light strip can be cut.
- Risk of Shock-Disconnect power before installation.
- The HOMI 2.0 Sticker supports :
HOMI-CEC(bypass), HOMI-ARC(bypass), Dolby atmos, Dolby vision(LLDV format), HDRIO, HDR10*, for almost all the major TV brands such as Samsung TV, Sony TV, etc.
Specifications
| Input Current | 2A (Max.) |
|---|---|
| Input voltage | DC 5V |
| Operating temperature | 32°F-104C (0°C-40°C) |
| Operating humidity | 5% < H < 55% (Non-condensing) |
Troubleshooting
-
Unable to use sync mode
Make sure the HDMI2.0 Sticker is connected to an external HDMI input device, such as a game console or TV box. Otherwise, the sync mode function cannot be used. -
The strip light does not illuminate/some LED do not illuminate
Check all wired connections. Before turning on the strip light, make sure it is securely plugged into the Type-C LED port.
If you have any questions about the device or if something is missing or damaged in the package, feel free to contact our support team with your order number.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Control via the APP (The sync mode can be only controlled via APP)
Download Lytmi APP
|
---|---
https://play.google.com/store/apps/details?id=com.opolar.smart|
https://itunes.apple.com/cn/app/id1578248520?mt=8
Make sure your WIFI is under 2.4Ghz; Turn on Bluetooth and GPS/location on
your phone.
On the APP, register and log in. The APP will detect the “Smart Light Strip”
automatically. Tap and add it.