homematic IP HAP Radiator Thermostat Instruction Manual
- June 13, 2024
- Homematic IP
Table of Contents
Homematic IP Radiator Thermostat – Evo, anthracite
Installation and brief instructions
HAP Radiator Thermostat
https://homematic-ip.com/sites/default/files/downloads/hmip-etrv-e-a-um- web.pdf
Proceed to the detailed manual
HmIP-eTRV-E-A // 158430 // V1.1 (11/2022)
Documentation © 2022 eQ-3 AG, Germany
All rights and changes reserved. Printed in Hong Kong.
Read the manual carefully and keep it in a safe place.
Attention! This indicates a hazard.
Additional important information.
Detailed manuals for… //
Homematic IP App //
Appli Homematic IP| WebUI Software //
Logiciel WebUI
---|---
| 
https://homematic-ip.com/sites/default/files/downloads/homematic-ip-
anwenderhandbuch.pdf| https://homematic-
ip.com/sites/default/files/downloads/WebUI_Handbuch_eQ-3.pdf
Device overview
A Metal nut
B Display
C Battery compartment (and cover)
D System button (teach-in button and device LED)
E Temperature adjustment via slight rotation (to the right or left)
Connect device to
A Homematic IP Access Point (Cloud)
B Central Control Unit
Tip: To make installation easier, you can
press a button in the battery compartment (after removing the batteries) while
fastening the metal nut on the heating valve. Use the enclosed support ring if
the radiator thermostat is too loose.
Adaption run
If the display backlight
is off, you must press button (D) a second time to start the adaption run.
Rotate display by 180°
Press the system button (D) and at the same time turn the temperature control
dial (E) in the direction in which you want the display to turn.
Set-up system:
A Homematic IP Access Point (Cloud)
B Central Control Unit
Function
This device is part of the Homematic IP smart home system and works with the
Homematic IP radio protocol. All devices of the Homematic IP system can be
configured comfortably and individually with a smartphone via the Homematic IP
app. Alternatively, you have the option of operating Homematic IP devices via
the CCU3 or in conjunction with many partner solutions. The available
functions provided by the system in combination with other components are
described in the Homematic IP User Guide. With the Homematic IP Radiator
Thermostat you can conveniently regulate the room temperature in your smart
home via the Homematic IP smartphone app according to your personal needs.
Individual temperature profiles can easily be created via the app – with up to
3 configurable heating profiles and 13 changes per day. Alternatively, the
temperature can be set intuitively directly on the device itself. With the
additional boost function, cool rooms can be heated within short by opening
the heating valve. Thanks to the rotatable display and the modern housing
design, the radiator thermostat perfectly fits to any home interior.
Open windows or doors are detected via the open-window detection or even more
precise in combination with the Homematic IP Window and Door Contact. The
heating temperature is automatically reduced to avoid any waste of energy. The
individual comfort is established again as soon as the window is closed.
The radiator thermostat fits to all common radiator valves and is easy to
mount – without having to drain any water or intervene in the heating system.
Further information on valve adapters and all technical documents as well as
updates can be found at www.homematic-ip.com.
Notes on operation
Please note that the room temperature control via the radiator thermostat is
designed for a two-pipe heating system with one feed and return line per
radiator. Use in single-pipe heating systems can lead to strong deviations in
the set temperature due to fluctuations in the flow temperature.
In case of visible damage of the existing radiator, valve or heating pipes,
consult a specialist.
Caution! There is a risk of explosion if the battery is not replaced
correctly. Replace only with the same or equivalent type. Never recharge non-
rechargeable batteries. Do not throw the batteries into a fire. Do not expose
batteries to excessive heat. Do not short-circuit batteries. Doing so will
present a risk of explosion.
Caution! Avoid skin and eye contact with leaking batteries! Wear suitable
protective gloves when removing leaking batteries and residues from a device!
In case of skin contact flush with plenty of water!
Declaration of conformity
eQ-3 AG, Maiburger Straße 29, 26789 Leer, Germany hereby declares that the
radio equipment type Homematic IP HmIP-eTRV-E-A is compliant with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at www
.homematic-ip.com.
Technical specification
| Device short name | Values |
|---|---|
| Supply voltage | HmIP-eTRV-E-A 158431 |
| Current consumption (max.) | 2x 1,5 V LR6/Mignon/AA |
| Battery life in years (type) | 500 mA |
| Degree of protection | 2 |
| Degree of pollution | IP20 |
| Ambient temperature | 2 |
| Dimensions (W x H x D) | 0 to 50 °C |
| Weight (including batteries) | 53 x 55 x 94 mm |
| Radio frequency | 190 g |
| Maximum radiated power | 868.0-868.6 MHz/869.4-869.65 MHz |
| Receiver category | 10 dBm |
| Typ. open area RF range | SRD category 2 // SRD catégorie 2 |
| Duty cycle | 230 m |
| Construction of the regulation and control unit | < 1 % per h / < 10 % per h |
| Method of operation | independently mounted electronic regulation and control |
unit //
Software class| type 1
Connection| class A
Controlling torque| M30 x 1,5 mm
Valve travel| > 80 N
Maximum travel position| 4,3 ± 0,3 mm
Minumum travel position| 14,3 ± 0,3 mm
| 10,0 ± 0,3 mm
Subject to technical changes
Bevollmächtigter des Herstellers:
Manufacturer’s authorised representative:
Mandataire du fabricant :
eQ-3 AG
Maiburger Straße 29
26789 Leer/Germany
www.eQ-3.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>