SCT RC-SDA RemoteCam4 and 3rd Party Camera User Guide
- June 13, 2024
- SCT
Table of Contents
SCT RC-SDA RemoteCam4 and 3rd Party Camera
Product Information
| Product Name | Model Number | Description |
|---|---|---|
| RC-SDATM & RemoteCam4TM HDMI+3rdPartyCameraDesignGuide | RCC-H030-1.0M | A |
design guide for integrating RC-SDATM and RemoteCam4TM
HDMI+3rdPartyCamera with other devices and systems.
RC-SDATM| N/A| An HDMI to YC (Component) cable used to connect the RC-SDATM
device to an HDMI/9 Pin port. The HDCIY cable needs to be purchased
separately.
Intregator-Supplied HDMItoHDMICable| N/A| An HDMI cable provided by the
integrator for connecting
compatible devices with HDMI ports.
DB9 to DB9 Cable| N/A| A cable with DB9 connectors on both ends, used for
connecting
compatible devices with DB9 ports.
Poly G7500 + RPG700/500/300 Codecs| N/A| A set of video conferencing codecs
and systems provided by
Poly. The Poly G7500 model is compatible with RPG700/500/300
codecs.
3rd Party HDMIVideoDevice| N/A| A video device from a third-party manufacturer
that supports
HDMI connectivity.
W PS-1230VDC 100-240V 47-63Hz PowerSupply| N/A| A power supply unit with input
voltage ranging from 100-240V
and frequency ranging from 47-63Hz. It provides power to the
mentioned devices.
RC4-HETM| N/A| A third-party RS232 controller used for remote control of
compatible devices.
W PS-1230VDC 100-240V 47-63Hz PowerSupply| N/A| A power supply unit with input
voltage ranging from 100-240V
and frequency ranging from 47-63Hz. It provides power to the
mentioned devices.
RC4-CETM| N/A| A third-party RS232 camera used for capturing video and
controlled via RS232 communication.
SCTLinkTM Cable Power,Control,Audio&Video| N/A| A cable used for transmitting
power, control signals, audio,
and video between compatible devices. The SCTLinkTM cable must
always be a single, point-to-point CAT cable without couplers or
interconnections.
Product Usage Instructions
To use the products mentioned above, follow these instructions:
- Ensure that all required cables and power supplies are available and properly connected.
- Refer to the RC-SDATM & RemoteCam4TM HDMI+3rdPartyCameraDesignGuide for detailed integration instructions with other devices and systems.
- If using the RC-SDATM device, connect it to an HDMI/9 Pin port using the HDCIY cable (purchased separately).
- If provided by the integrator, use the Intregator-Supplied HDMItoHDMICable to connect compatible devices with HDMI ports.
- For devices with DB9 ports, use the DB9 to DB9 Cable to establish connections.
- Make sure the Poly G7500 system is compatible with RPG700/500/300 codecs for seamless integration.
- If using a third-party HDMI video device, ensure it supports HDMI connectivity.
- Connect the power supply unit (W PS-1230VDC 100-240V 47-63Hz) to provide power to the mentioned devices.
- If using the RC4-HETM RS232 controller, follow its user manual for remote control operations.
- If using the RC4-CETM RS232 camera, follow its user manual for video capture and RS232 communication.
- When using the SCTLinkTM cable, ensure it is a single, point-to-point CAT cable without couplers or interconnections. Use it for transmitting power, control signals, audio, and video between compatible devices.
Connection
RC-SDA™ &RemoteCam4™
- HDMI+3rdPartyCameraDesignGuide
- PolyG7500+RPG700/500/300Codecs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>