Ariete 4137 Vapori Jet Steam Gun Instruction Manual
- June 13, 2024
- Ariete
Table of Contents
Ariete 4137 Vapori Jet Steam Gun
Although the appliance is equipped with safety devices, read the safety instructions carefully and use the appliance only as described in it to avoid accidental injury or damage. Keep this manual for future reference. When handing over the appliance to another person, make sure to include it. Information in this manual is marked as follows:
- DANGER to children and people with restricted capabilities of operating appliances Danger due to electricity
- Danger of injury due to other reasons
- Warning about burns/scaldings
- Caution – material damage
IMPORTANT SAFEGUARDS
CAREFULLY READ THESE INSTRUCTIONS
Danger to children and people with restricted capabilities of operating appliances
-
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
-
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
-
Children shall not play with the appliance.
-
In the event that you decide to dispose of the appliance, we advise you to make it inoperative by cutting off the power cord. We also recommend that any parts that could be dangerous be rendered harmless, especially for children, who may play with the appliance or its parts.
-
Packaging must never be left within the reach of children since it is potentially dangerous.
Danger due to electricity -
Check that the voltage indicated on the plate corresponds with that of the local network before connecting the appliance to the supply mains.
-
Always plug the appliance into a grounded outlet.
-
Never leave the appliance unattended when it is connected to the electric network.
-
Always unplug the appliance when you fill the boiler tank with water.
-
Even when not in use, unplug it from the electric outlet and allow it to cool down, before inserting/removing the single parts or before cleaning.
-
Always make sure that your hands are thoroughly dry before using or adjusting the switches on the appliance, or before touching the power plug or power connections.
-
This appliance complies with directives 2014/35/EU and EMC 2014/30/EU.
The danger of injury due to other reasons -
Do not leave the appliance exposed to the weather (rain, sun, etc.).
-
Never direct the steam jet toward people, animals or devices that contain electrical parts (e.g. the inside of an oven).
-
Never place the appliance body, plug, or power cord in water or other liquids; always wipe clean with a damp cloth.
-
To unplug the appliance, grip the plug and remove it directly from the power socket. Never pull the power cord to unplug the appliance.
-
Do not use the appliance if it is damaged. Any repair work, including the replacement of the power cord, must only be carried out by Ariete’s Technical Assistance Service or by Ariete’s authorized technicians – in order to prevent any risk.
-
The operating appliance contains steam under pressure; improper use may be dangerous. The appliance is designed only for domestic use, as indicated on the manual. The manufacturer shall not be held responsible under any circum-stances for damages arising from an improper or wrong use of the product.
Warning about burns/scaldings -
CAUTION: danger of burns
-
Do noat touch hot surfaces while the appliance is being used. Allow the attachment to cool down before replacing them.
-
DO NOT OPEN THE SAFETY CAP WHILE THE APPLIANCE IS BEING USED.
-
Warning: before loosening the cap, proceed as follows:
- disconnect the power cord from the mains socket;
- exhaust the residual pressure inside the boiler, by pressing the steam bush button on the nozzle, direct the jet into an appropriate container;
- leave the appliance to cool for a few minutes;
- partially and slowly unscrew the safety cap and wait some seconds;
- completely unscrew and remove the safety cap.
-
Do not tilt the appliance more than 45o from its upright position while it is being used inorder to prevent hot water from leaking out of the boiler tank.
Caution – material damage -
The appliance is provided with a temperature regulator, a thermofuse and a safety plug. It complies with European standards regarding electrical household appliances.
-
Before using the appliance, ensure that the objects, surfaces and fabrics to be cleaned are resistant to or compatible with the high temperature of the steam. In particular, follow the directions provided by the manufacturer and carry out a test on a hidden part or a sample before using the appliance on cotto floors, wooden surfaces or delicate fabrics such as silk and velvet.
-
Do not use in pools containing water.
-
When using the flexible pipe, before releasing the steam, direct the jet into a container so as to remove the condensate from the pipe.
-
Never add descaling/aromatic/alcoholic agents or detergents to the water in the boiler as they may damage the appliance. It is recommended to use tap water or 50% demineralized water/50% tap water in case of very hard water.
-
When using for the first time or after a long disuse, direct the jet into a container to discharge the exceeding water.
-
WARNING: do not use the glass-cleaning brush if the surface to be cleaned is very cold. The change in temperature could cause the glass to crack. At times when temperatures are particularly low, preheat the glass by directing steam over the whole surface to be treated from a distance of about 40cm.
-
For disposing the appliance in an adequate manner, according to the European Directive 2012/19/EU, please read the appropriate leaflet attached.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
DESCRIPTION OF THE APPLIANCE
- A Safety cap
- B Safety cursor
- C Steam push button
- D Handle
- E On light
- F Nozzle
- G Appliance body H Funnel
- I Round brush
- L Measuring cup
- M Bent nozzle
- N Straight nozzle
- O Flexible hose
- P Brush for fabric
- Q Squeegee
- R Cloth
INSTRUCTIONS FOR USE
How to fill the boiler tank before use
NEVER UNSCREW THE SAFETY CAP (A) BEFORE HAVING CHECKED THAT THE APPLIANCE IS UNPLUGGED FROM THE POWER SOCKET.
- Unscrew the safety cap (A) and overturn the boiler tank to drain it completely.
- Fill the boiler tank (figure A) with a measure (H) full of water by means of the funnel (L).
- Screw the safety cap (A) on again.
Appliance functioning
-
To switch the appliance on, plug it in; the appropriate light (E) will go on. Steam will be ready in 3/4 minutes.
-
To avoid the accidental activation of steam, move the cursor (B) from left to right ( ). To unlock, move the cursor (B) from right to left ( ), Fig. C.
-
For steam supply, press the appropriate button (C), after having moved the safety cursor (B) to the left (Fig. C). Release the button (C) to stop the steam supply.
-
When using the appliance for the first time, direct the steam jet into a container to remove any water residue in the pipe (any water leakage is caused by the steam condensation inside the pipe). Repeat the above operation also after few minutes of standstill. Anyway, when the nozzle begins to supply steam, always direct the jet toward the floor.
ATTENTION: When the appliance is not used, always lock the steam push button via the opposite safety cursor (B).
APPLICATION OF THE ATTACHMENTS
-
Straight nozzle:
fully insert the attachment by pushing it against the appliance fixed part, making sure the pin on the joint fits perfectly into the relevant slot on the nozzle. Turn according to the direction indicated by the arrow (clockwise) on the nozzle; in this way, the attachment remains fixed in the central locking position (Fig. B). -
Round brush and bent nozzle:
Both attachments can be applied both on the straight nozzle (Fig. D) and on the nozzle (Fig. E), by inserting them on the hexagonal end according to the required angle. -
Flexible pipe, Brush for fabrics and glass wiper:
The flexible pipe (O) must be fitted to the nozzle (F), Fig. F. Then apply the round brush (I), the bent nozzle (M) the straight nozzle (N), and then the brush for fabrics (P) to the hexagonal end on the pipe. The brush for fabrics is provided with a cloth that can be used for cleaning delicate surfaces, such as sofas, armchairs, blankets, mattresses, and cushions (Fig. G). The brush can also be used to freshen up fabrics, removing all creases. Anyway, when using the appliance for the first time or during operation, it is advisable to discharge the steam condensation into a container to avoid wetting fabrics.
The brush for fabric can be fitted to the glass wiper. To assemble the two attachments, insert the tabs on the base of the fabric brush into the hooks on the base of the glass wiper (Fig. H). Thanks to the glass wiper, windows, mirrors, and glossy surfaces recover their brilliance. It can be used easily also on glass shower cabins, avoiding the problem of the traces of limescale.
HOW TO FILL THE BOILER WHILE THE APPLIANCE IS BEING
When the water in the boiler tank has run out and you press the button (C) no steam will come out. To refill, carry out the following operations:
- a) unplug the appliance;
- b) wait for about 10 seconds;
- c) carefully unscrew the safety cap (A). Before unscrewing it completely wait for the hissing noise created by residual steam to stop;
- d) unscrew the cap completely and slowly pour a measure of water into the boiler by means of the funnel (H). Take care not to let any water flow out of the tank during this operation;
- e) retighten the safety cap;
- f) insert the plug into the outlet.
ATTENTION: In case the safety cap (A) does not loosen, wait some minutes to allow the appliance to cool down as there is still some steam under pressure. Press the steam push button (C) to exhaust the residual steam in the boiler and proceed with cap removal again.
CLEANING AND MAINTENANCE OF MACHINE
Unplug the appliance from the outlet before carrying out any operation. Let the appliance cool down completely before putting it away or cleaning it. To ensure the appliance’s best performance and long life, rinse out the boiler every month to remove any scale deposits. Do not use vinegar or other descaling agents.
FAQ’s
What is the Ariete 4137 Vapori Jet Steam Gun?
The Ariete 4137 Vapori Jet Steam Gun is a versatile handheld steam cleaning device designed for various cleaning applications, including home cleaning, car detailing, and more.
What are the key features of the Vapori Jet Steam Gun?
Key features of the Vapori Jet Steam Gun include high-pressure steam cleaning, multiple attachments for different surfaces, a large water tank capacity, and a compact and portable design.
How does the steam cleaning process work with this device?
The Vapori Jet Steam Gun heats water to produce high-pressure steam, which can effectively dissolve and remove dirt, grime, and grease from various surfaces without the need for chemicals.
What types of surfaces can I clean with the Vapori Jet Steam Gun?
You can use the Vapori Jet Steam Gun to clean a wide range of surfaces, including floors, tiles, countertops, upholstery, car interiors, windows, and more.
Is the steam temperature adjustable on this device?
Yes, the Vapori Jet Steam Gun typically allows you to adjust the steam temperature to suit different cleaning tasks, providing flexibility in your cleaning efforts.
Does this steam gun come with different cleaning attachments?
Yes, the Vapori Jet Steam Gun usually comes with a variety of cleaning attachments, such as brushes, nozzles, and extension wands, to tackle different cleaning scenarios effectively.
What is the water tank capacity of this steam gun?
The water tank of the Vapori Jet Steam Gun typically has a large capacity, allowing you to clean for an extended period without frequent refills.
Is the steam gun easy to use and operate?
Yes, the Vapori Jet Steam Gun is designed to be user-friendly and easy to operate. It often features intuitive controls for steam output and safety mechanisms.
Can I use tap water with this steam gun, or does it require distilled water?
In most cases, you can use tap water with the Vapori Jet Steam Gun. However, using distilled water may be recommended to prevent mineral buildup over time.
Is this steam gun suitable for sanitizing surfaces?
Yes, the high-temperature steam produced by the Vapori Jet Steam Gun can effectively sanitize and disinfect surfaces, making it suitable for maintaining a clean and hygienic environment.
What safety features are included with this steam gun?
The Vapori Jet Steam Gun typically includes safety features such as a safety lock, overheat protection, and a pressure release valve to ensure safe operation during use.
Is there a warranty provided with the Vapori Jet Steam Gun?
The warranty for the Vapori Jet Steam Gun may vary depending on the retailer and your location. It's advisable to check the warranty details provided with your specific product.
Can I clean carpets and rugs with this steam gun?
Yes, you can use the Vapori Jet Steam Gun to clean carpets and rugs. It often includes a carpet glider attachment for this purpose.
References:Ariete 4137 Vapori Jet Steam Gun – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>