EKSA GT1 Cobra Gaming Bluetooth Earbuds User Manual

June 13, 2024
EKSA

EKSA GT1 Cobra Gaming Bluetooth Earbuds

Package Contents

  1. EKSA GT1 Earbuds

  2. Charging Case

  3. USB Type-C Charging Cable

  4. Eartips: Size S x1 Pair

  5. Eartips: Size L x1 Pair

  6. User Manual

Specifications

Product Name: EKSA GT1
Bluetooth Version: 5.0
Low Latency: 45 ms
Driver Diameter: 10 mm
Operation   Range: ≥ 10 m
Impedance: 32 Ω ± 10%
Sensitivity: 98 ± 3 dB (game mode)
Sensitivity: 105 ± 3 dB (music mode)
Frequency Response: 20 Hz – 20 kHz
Earbuds   Battery: 50 mAh
Charging Case Battery: 500 mAh
Playing Time: 6 hours
Charging Time: 1.5 hours

Product Overview

  1. Charging Case LED Indicator

  2. Type-C Charging Port

  3. EKSA GT1 LED Indicator

  4. Multi-Function Touch Button

  5. Microphone

  6. Wireless Charging Pins

How to Pair

How To Pair

  1. Put EKSA GT1 earbuds into the charging case.
  2. Close the charging case.
  3. Open the charging case and take the earbuds out, EKSA GT1 will automatically start pairing mode.
  4. Turn on your device’s Bluetooth and pair your device with EKSA GT1.
  5. EKSA GT1 earbuds will be connected.

How to Wear

1. Choose the proper pair of eartips.

2. Put EKSA GT1 into your ears.

3. Adjust the earbuds to your comfort.

How to Use

  • Open the case and take out the earbuds Power on automatically

  • Put the earbuds back and close the charging case Power off automatically

  • Press for 5 seconds Power on manually

  • Press for 5 seconds (pause music play) Power off manually

  • Put the earbuds back into the charging case, and press for 6 seconds (in shutdown mode) Clear pairing

  Enjoy Your Music

  • Click x 3 Voice Assistant

  • Click x 2 Music Switching (left for previous track, right for next track)

  • Press for 2 seconds Music/Game Mode Switching

  • Click x 1 Play/Pause

Take a Clear Phone Call

  • Click x 1 Answer Call

  • Press for 2 seconds Reject Incoming Call

  • Click x 1 End Call

Charging

Charging

  1. Output: DC 5V
  2. Charging Indication:
  3. 100%-75%
  4. 75%-50%
  5. 50%-25%
  6. 25%-0

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    FCC RF exposure statement:
    The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
    FCC ID:2A25A-GT1

Manufacturer’s Name : YI ZHAO (SHENZHEN) CO., LIMITED
Manufacturer’s Address : 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural And Creative Expo City, No.5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen.
Product name: True Wireless Earphone
Model number : GT1
Operating Temperature : -20°C to 55°C
EU compliance statement:YI ZHAO (SHENZHEN) CO., LIMITED. Hereby declares that this device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the EU declaration of the conformity is available online at www.eksa.net
UK compliance statement:YI ZHAO (SHENZHEN) CO., LIMITED. Hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206).
A copy of the UK declaration of the conformity is available online at www.eksa.net RF specification

Function Operation Frequency Transmission power (EIRP)
Bluetooth 2402MHz~2480MHz <20dBm
UK REP
--- ---

APEX CE SPECIALISTS LIMITED
Add.: 89 Princess Street, Manchester,
M1 4HT, UK
Tel.: +441616371080
Email: info@apex-ce.com

EC REP

C&E Connection E-Commerce (DE) GmbH
Add.: Zum Linnegraben 20, 65933, Frankfurt am
Main, Germany
Tel.: +4906927246648
Email: info@ce-connection.de

Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED
Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural and Creative Expo City, No.5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen City, Guangdong Province, China

Symbol Symbol

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals