poly RC-SDA Sound Control Technologies User Guide
- June 13, 2024
- Poly
Table of Contents
poly RC-SDA Sound Control Technologies
Product Information
The Poly EagleEye IV with Producer is a video conferencing camera system that includes the following components:
- Poly Provided Cable
- RC-SDATM & RC4 ProducerTM Application Guide
- PolyRPG300, RPG500, RPG700 & RPG7500
- RC-SDATM
- RCC-M001-1.0M RCC-H001-1.0M DB9toDB9RS232 HDMItoHDMICable
- RC4-HETM
- RC4-CETM
- HDMItoUSB Converter
- W PS-1230VDC 100-240V 47-63Hz PowerSupply
- RCC-M002-1.0M 3-Pin Phoenix to DB9-F
- Laptop
- SCTLinkTM Cable
- Power, Control, Audio & Video
Product Usage Instructions
To use the Poly EagleEye IV with Producer, please follow these instructions:
Step 1: Connecting the Components
- Connect the Poly Provided Cable to the appropriate ports on the camera system and other devices as needed.
- Refer to the RC-SDATM & RC4 ProducerTM Application Guide for specific instructions on connecting the RC-SDATM and RC4 ProducerTM.
- Use the provided HDMItoHDMICable to connect compatible devices.
- If required, use the HDMItoUSB Converter to connect the camera system to a USB port.
- Connect the W PS-1230VDC 100-240V 47-63Hz PowerSupply to provide power to the camera system.
- Use the RCC-M002-1.0M 3-Pin Phoenix to DB9-F cable for any additional connections. Connect the laptop to the camera system using the SCTLinkTM Cable.
Step 2: SCTLinkTM Cable Specifications
The SCTLinkTM cable must always be a single, point-to-point CAT cable with no couplers or interconnections.
Use integrator-supplied CAT5e/CAT6 STP/UTP cable with either T568A or T568B wiring standards. The cable length should be between 10m and 100m.
Step 3: Pinout Information
The RJ45 pinout for the SCTLinkTM Cable is as follows:
| Pin | T568A | T568B |
|---|---|---|
| 1 | g | o |
| 2 | o | O |
| 3 | g | b |
| 4 | B | b |
| 5 | B | g |
| 6 | o | g |
| 7 | B | r |
| 8 | r | B |
Step 4: Module Dimensions
The dimensions for the different modules are as follows:
- RC4-CETM: H: 0.93″ (23mm) x W: 2.5″ (63mm) x D: 3.741″ (95mm)
- RC4-HETM/RC-SDATM: H: 1.504″ (38mm) x W: 3.813″ (96mm) x D: 3.617″ (91mm)
Please refer to the complete user manual for detailed instructions on setting up and using the Poly EagleEye IV with Producer.
RC-SDA™ & RC4 Producer™ Application Guid
Overview
Module Dimensions
- RC4-CE™. H: 0.93″ (23mm) x W: 2.5″ (63mm) x D: 3.741″ (95mm)
- RC4-HE™/RC-SDA™: H: 1.504″ (38mm) x W: 3.813″ (96mm) x D: 3.617″ (91mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>