poly ROVE 20 Handset Keypadphone User Guide
- June 1, 2024
- Poly
Table of Contents
poly ROVE 20 Handset Keypadphone
For more support visit: poly.com/support/rove
TOOLS NEEDED FOR WALL MOUNT
- Drill
- 6 mm drill bit
- Screwdriver
- Hammer
CONTENTS
- Poly Rove 20 DECT IP Phone (with clip)
- Charging Cradle
- 5V USB Power Adapter (Varies by Country)
Included in Phone/Base Station Kit
- Base Station with Stand
- Ethernet Cable
- 5V Power Adapter (Varies by Country)
- 2x 3.5 x 31 mm Screw
- 2x Plastic Wall Anchor
PHONE FEATURES
Front View:
- LED Status Indicator
- Receiver
- Screen
- Softkeys
- Menu
- End Call
- Speakerphone Navigation Keys/Volume Control
- Answer/Place Call
- Dialpad
- Lock/Unlock
- Silent Mode
- Programmable Line Keys
- Microphone
Side View:
- 3.5 mm Headset Port
- Speaker
SETUP INSTRUCTIONS
Remove Battery Tab
1. Locate the battery tab protruding from the handset.
2. Pull the battery tab out of the handset to activate the
batteries.
Charging Cradle
Place the handset into the charging cradle, ensuring the charging contacts on the handset and cradle meet.
Attaching the Clip
A lign the clip with the handset and press firmly to attach.
Base Station Setup
Position the base station with the stand attached on a flat surface or mount it to the wall.
Wall Mounting
- Attach the wall mount bracket to the back of the base station.
- Mark the wall through the holes on the bracket for drilling.
- Drill two 6 mm holes where you have marked.
- Insert the plastic wall anchors into the drilled holes.
- Screw the base station into the wall anchors firmly.
SPECIFICATIONS
| Feature | Specification |
|---|---|
| Drill Bit Size | 6 mm |
| Wall Mount Hole Distance | 70 mm |
FAQ
-
Where can I find more support for my Poly Rove 20?
- Additional support can be found at poly.com/support/rove.
-
How do I activate the batteries on my Poly Rove 20?
- Pull the battery tab out of the handset to activate the batteries.
-
How can I mount the base station to the wall?
- You will need a drill, a 6 mm drill bit, screwdriver, and hammer to mount the base station to the wall using the provided wall mount bracket, screws, and anchors.
Read User Manual Online (PDF format)
Loading......