WP Life365 Indie Health Blood Pressure Monitor User Guide

: June 4, 2024
: WP

Table of Contents

WP Life365 Indie Health Blood Pressure Monitor
What is a Blood Pressure Monitor?
How Remote Patient Monitoring Works
Now You Are Ready to Start Monitoring!
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WP Life365 Indie Health Blood Pressure Monitor

WELCOME! Now that you have successfully installed the Life365 Health app and enabled the Bluetooth settings on your smart device, you are ready to begin setting up your monitoring devices. We are so glad you have decided to start proactively managing your blood pressure from home with our monitoring technology.

What is a Blood Pressure Monitor?

Checking your blood pressure at home is an important part of managing high blood pressure (hypertension). Monitoring with a blood pressure device ensures your medication is working, and alerts you and your doctor to potential health complications.

How Remote Patient Monitoring Works

WP-Life365-Indie-Health-Blood-Pressure-Monitor-FIG-2

WHAT THE PATIENT WILL DO:

Use this device as instructed by your doctor
Call WPH Cares at 914-681-2273 (M-F, 10am-4pm) for clinical questions
Call Life365 at 888-818-2322, ext: 2 for technical support (M-F, 8am-8pm)
In an emergency, call 911 or go to the Emergency Department

For more RPM resources, visit wphospital.org/rpm

WHAT THE CARE TEAM WILL DO:

Monitor your device readings
Be available to support you through the monitoring process
Contact you and/or your doctor if:
No readings are logged
Readings are above or below target

Using Your Blood Pressure Monitor
Your provider has asked that you use this device every day. However, your plan is individual to you and your health needs. Make sure you write down how often your provider would like you to record your levels. Taking your daily readings only requires a few minutes!

NOTE: For measurement readings to be recorded in your Life365 account, the Life365 Health App must be open when a measurement reading is being taken.

MY PERSONAL BLOOD PRESSURE PLAN IS:

times per day
number of days
is my goal level
- You should take more readings if:
You are short of breath
You suspect the reading was not accurate or improperly recorded
Make sure you are relaxed and sitting calmly in a chair with your feet, back and arms supported.
Don’t smoke, exercise, drink caffeinated or alcohol beverages within 20 minutes of measurement.
Place the bottom of the cuff above the bend of the elbow.

Now You Are Ready to Start Monitoring!

The last step on your way to personalized health co-monitoring is to pair your medical devices with your smartphone/mobile device at home via Bluetooth.

Tap the Hamburger Menu (three lines), located in the upper left of the app screen (A). In the menu list, select My Devices (B).
In My Devices, select the button Add New. The app will search for the Bluetooth device (C).
Make sure the Bluetooth device is located near the smart device. For Bluetooth device pairing instructions and other resources https://www.life365.health/en/support/app.
To pair the device, you’ll need to take a reading. Insert the cord from the cuff into the port on the left side of the blood pressure monitor. Place the cuff around the arm as instructed by your care team. Press the START/STOP button (D) one time to activate the monitor, and a second time to begin taking the reading. The cuff will automatically start to inflate as you see numbers increasing on the monitor’s display screen.
Once the reading is complete, allow a few moments for the app to find the monitor. Once found, it will appear in the device list on the app screen (E).
Select the button Add to My Devices (F). The app will return to the My Devices screen. The new Bluetooth device will now be listed.
Allow a few moments for the measurement reading to sync and record in the app. Navigate to the main app Dashboard to review all measurement readings. (H)
Tap the Hamburger Menu (three lines), located in the upper left of the app screen (H). In the menu list, select My Devices (I).
You should see your Blood Pressure device listed in your “My Devices” list. If you do not, start this process again. Tap on the right arrow in line with the device name to take you to the device details (J).
Once in the device details, click on the settings button on the top right.
Be sure the device is set to “Receive data automatically”. Tap “Yes” (L).