Display Pros 3010 Blaze Wall Light Box Instruction Manual
- June 13, 2024
- Display Pros
Table of Contents
Blaze Light Box 3010 – Wall
3010 Blaze Wall Light Box
Blaze Wall Mounted Light Box 3010 is 30’w by 10’h and features a durable 4”
aluminum frame in your choice of Silver, White or Black.
Perimeter, interior LED light bars are pre-attached to the frame and make the
box GLOW. The light bars feature an internal power supply, which means no
separate power supplies within the frame, minimizing shadowing and cord
management.
Two backlit graphic material options are available to choose from, Backlit
Textile (dye-sublimation printed) and Intensity (UV/LED printed). Backlit
Textile is a tightly woven fabric that is slightly stretchy, foldable and
washable; it is best for multiple uses. Intensity is a material that has a
smooth, coated finish. The double-strike process creates vibrant backlit
graphics.
Simply assemble the frame, hang, install the graphic and plug in!
We are continually improving and modifying our product range and reserve the
right to vary the specifi cations without prior notice. All dimensions and
weights quoted are approximate and we accept no responsibility for variance.
E&OE. See Graphic Templates for graphic bleed specifications
features and benefits:
- 30’W x 10’H
- 4” light boxes feature a sleek, aluminum frame
- Available in white, black or silver
- Perimeter LED light bars are pre-attached to the frame
- Light bars feature an internal power supply, which means no separate power supplies within the frame
- Easy to assemble, comes with hanging hardware
- UL Certified & ADA compliant sizing, approved for public spaces
- 5 year LED warranty on lights; long life span – 43,800 hours for 5 years if powered 24/7
- Lifetime warranty on frame
dimensions:
Hardware
Assembled unit:
360”w x 120”h x 4”d
9144mm(w) x 3048mm(h) x 101.6mm(d)
Approximate Weight:
269 lbs / 122.016 kg
Graphics
Graphic material: Backlit Textile (dye-sublimated
fabric) or Intensity (UV printed)
See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit:
https://www.theexhibitorshandbook.com/downloads/download-graphic-templates
or click here
Shipping
Packing case(s):
5 Boxes
Shipping dimensions:
4 x BOXES (79″L x 9″H x 11″D)
2006.6mm(l) x 228.6mm(h) x 279.4mm(d)
1 x BOX (24″L x 14″H x 8″D)
609.6mm(l) x 355.6mm(h) x 203.2mm(d)
Approximate shipping weight:
289 lbs / 131.088 kg
additional information:
Tools Required
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your
thumb, then push the SEG bead into the middle of the run (5-8) and work your
way around the perimeter of the frame until all beading is pushed in properly;
if necessary, go around the perimeter again to ensure beading is secure in the
extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands
before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the
graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip
lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If
washing is necessary, use a commercial size front-loading washing machine,
gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to
prevent shrinkage.
LED Lights
NOTE: A maximum of 20 LED fixtures can be connected in a line.
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 2 | 8FT POWER CORD FOR LED-EV LIGHTS | |
| 4 | CB10 90 DEGREE CONNECTOR | |
| 17 | JOINER BAR (OLD STYLE) | |
| 1 | 1524MM (60.00in) LENGTH OF 347 |
EXTRUSION-WITH MITRE CUT LEFT END FOR
CB10-IB2 LOCK HOLE RIGHT END-WITH GROMMET
HOLE 250MM FROM LEFT END
2| | CB10-IB2 LOCK HOLE LEFT END
EXTRUSION-WITH MITRE CUT RIGHT END FOR
1524MM (60.00in) LENGTH OF 347
10| | 1203MM LENGTH OF PH EXTRUSION-WITH IB2
LOCK HOLES ONE SIDE-CAM LOCK ONE SIDE
1| | CB10-IB2 LOCK HOLE RIGHT END
EXTRUSION-WITH MITRE CUT LEFT END FOR
1524MM (60.00in) LENGTH OF 347
2| | CB10-IB2 LOCK HOLE RIGHT END
EXTRUSION-WITH MITRE CUT LEFT END FOR
1219MM (47.99in) LENGTH OF 347
2| | CB10-IB2 LOCK HOLE LEFT END
EXTRUSION-WITH MITRE CUT RIGHT END FOR
1219MM (47.99in) LENGTH OF 347
8| | 1524MM (60.00in) LENGTH OF 347
EXTRUSION-WITH IB2 LOCK HOLES BOTH ENDS
6| | BLAZE LIGHTBOX WALL BRACKETS (2-BRACKE
4-SCREWS, 4-ANCHORS)
20| | 19″ LED AC LIGHT BAR 6000 K
24| | 10″ LED AC LIGHT BAR 6000 K
STEPS
- Mount top brackets to wall studs.
- Assemble frame on floor and add liner to back.
- Hang frame on top brackets.
- Mount bottom wall brackets to wall and secure frame.
SETUP INSTRUCTIONS
| QTY | IMAGE | DESCRIPTION |
|---|---|---|
| 1 | GRAPHIC (A1) (363.88 w X 99.88 h total size ) 359.88 w X 95.88 h finish |
size, UV/LED print on Backlit Intensity, single sided, sewn with silicone beading around perimeter & pull tab in bottom right corner
ADD GRAPHICS