Display Pros MODify 4-Sided Kit Instruction Manual
- June 13, 2024
- Display Pros
Table of Contents
Display Pros MODify 4-Sided Kit
Product Information
The MODify 4-Sided Kit 01 is a freestanding, four-sided illuminated tower that is part of the MODifyTM Modular Merchandising System. This system is designed with interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create various display configurations. The tower incorporates SEG push-fit fabric graphics, allowing for effortless branding, promotion, and merchandising.
Features and Benefits:
- Heavy-duty aluminum frame and steel base
- Steel slotted uprights
- Four frames and LED lights inside the tower for an illuminated effect
- Two full-height custom printed graphic panels on two sides
- Two slatwall panels with graphics on top on the other twosides
- Easy assembly and installation
- Lifetime hardware warranty against manufacturer defects
Optional Accessories:
- Towel bars
- Faceout bars
- Waterfalls
- U bars
- Slatwall hooks
- Shelves
Dimensions:
- Assembled unit: 39W x 144H x 39D (990.6mm(w) x 3657.6mm(h) x 990.6mm(d))
- Approximate Weight: 226 lbs / 102.512 kg
Shipping:
- Packing case(s): 1 Box
- Shipping dimensions: (96L x 14H x 24D) (2438.4mm(l) x 355.6mm(h) x 609.6mm(d))
- Approximate shipping weight: 302 lbs / 136.985 kg
Additional Information
- Powder coat color options: All white, black, or silver
- Wood laminate color options: Not specified
- Tools Required: MULTI HEX KEY (INCLUDED), PHILLIPS SCREW DRIVER (NOT INCLUDED), 9/16 SOCKET WRENCH (NOT INCLUDED)
Product Usage Instructions
How to Apply & Remove Graphics: Installation:
- Push the SEG bead into each corner of the frame (1-4) with your thumb.
- Push the SEG bead into the middle of the run (5-8).
- Work your way around the perimeter of the frame, pushing in the beading properly.
- If necessary, go around the perimeter again to ensure the beading is secure in the extrusion profile.
Note: Keep the setup area clean by using a drop cloth, washing hands before setup, or wearing gloves.
Removal:
- Use the pull tab located on the graphic.
- Gently pull the graphic from the frame, going around the perimeter.
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of inter changeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote andmerchandise with ease. MODify 4-Sided Kit 01 is a freestanding, four-sided illuminated tower. The tower features two full-height custom printed graphic panels ontwo sides, while the other two sides are equipped with slatwall panels with graphics on top. LED lights inside the tower make it glow.
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility forvariance. E&OE. See Graphic Templates for graphic bleed specifications
Features and benefits
Base Kit includes:
- Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
- Heavy-duty aluminum frame, steel base
- Steel, slotted uprights
- Four frames & LED lights inside the tower make it glow
- Two 36”W x 72”H slatwall panels on two sides with 36”W x 73”H graphics on top
- Two 36”W x 141”H full height graphic panels
- Display is easy to assemble and install
- Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
- Towel bars.
- U bars
- Faceout bars
- Slatwall hooks
- Waterfalls
- Shelves
Dimensions
Hardware
Assembled unit:
- 39”W x 144”H x 39”D
- 990.6mm(w) x 3657.6mm(h) x 990.6mm(d)
- Approximate Weight:
- 226 lbs / 102.512 kg
Graphics
- Graphic material: Dye-sublimated fabric
- See graphic templates for graphic sizes.
- Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates click here
Shipping
- Packing case(s): 1 Box
- Shipping dimensions: (96″L x 14″H x 24″D) 2438.4mm(l) x 355.6mm(h) x 609.6mm(d)
- Approximate shipping weight: 302 lbs / 136.985 kg
Additional information:
Powder coat color options:
Wood laminate color options:
MODify Accessories
All Accessories available in white, black, or silver
Tools Required
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy! Installation: Push the SEG
bead into each corner of the frame (1-4) with your thumb, then push the SEG
bead into the middle of the run (5-8) and work your way around the perimeter
of the frame until all beading is pushed in properly; if necessary, go around
the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands
before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the
graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip
lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If
washing is necessary, use a commercial size front-loading washing machine,
gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended
to prevent shrinkage.
SETUP INSTRUCTIONS
Kit Hardware BOM
| ITEM | COMPONENTS | QTY | DESCRIPTION |
|---|---|---|---|
| 005-879 | 22 | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION | |
| 101-883-01-01 | 2 | 883MM LENGTH OF PH1 EXTRUSION-WITH CAM LOCKS BOTH ENDS | |
| 101-914-01-01 | 1 | 914MM LENGTH OF PH1 EXTRUSION-WITH CAM LOCKS BOTH ENDS | |
| 810-883-01-01 | 8 | 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM |
LOCKS BOTH ENDS
| 810-883-01-01| 2| CENTER NOTCH ON INSIDE
| 825-1318| 4| 1318MM (51.89in) TOP UPRIGHT
| 825-2300| 4| 2300MM (90.55in) BOTTOM UPRIGHT
| 825-EC| 4| 7MM SEG PLASTIC END CAP FOR 825 EXTRUSION
| 890-883| 4| 883MM (34.76in) OF SWC EXTRUSION
| | 890-1668| 4| 1668MM (65.67in) OF SWC EXTRUSION
| LED-CORN-24W| 5| LED-CORN-24W – LED CORN LIGHT, 8.25″ L X 2.875″ D., 24W,
6500K, COOL WHITE
| LED-LT-FXT-3WAY| 2| LED-LT-FXT-3WAY – 3 SOCKET LIGHT FIXTURE, WHITE
| LED-LT-PWR-CORD| 2| cable UL/ socket CE
|
MFY-SLF-STD-68.5
|
2
|
1740MM (68.50in) LENGTH OF SHELF STANDARD EXTRUSION
Kit Graphics BOM
|
MFY-4S-01-A-G
|
1
| (39.26 w X 77.06 h total size ) 35.26 w X 73.06 h finish size, UV/LED print
on Backlit Intensity, single sided, sewn with silicone beading around
perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT
BOTTOM HORIZONTAL SIDE CORNERS)
---|---|---|---
|
MFY-4S-01-B-G
|
1
| (39.26 w X 145.11 h total size ) 35.26 w X 141.11 h finish size, UV/LED
print on Backlit Intensity, single sided, sewn with silicone beading around
perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT
BOTTOM HORIZONTAL SIDE CORNERS)
|
MFY-4S-01-C-G
|
1
| (39.26 w X 77.06 h total size ) 35.26 w X 73.06 h finish size, UV/LED print
on Backlit Intensity, single sided, sewn with silicone beading around
perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT
BOTTOM HORIZONTAL SIDE CORNERS)
|
MFY-4S-01-D-G
|
1
| (39.26 w X 145.11 h total size ) 35.26 w X 141.11 h finish size, UV/LED print on Backlit Intensity, single sided, sewn with silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>