Display Pros 03 MODify 4-Sided Wall Kit User Guide

Display Pros 03 MODify 4-Sided Wall Kit

Product Information

• The MODify 4-Sided Kit 03 is a part of the MODifyTM Modular Merchandising System. It is a versatile display system that consists of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create various display configurations. The system incorporates SEG push-fit fabric graphics, allowing for easy branding, promotion, and merchandising.
• The MODify 4-Sided Kit 03 specifically creates a four-sided arch retail display. It includes panels of slatwall and SEG push-fit graphics, making it suitable for both merchandising and branding purposes. The display also provides accessible storage options. Optional fixtures such as shelves, hooks, hang bars, and waterfalls can be added to enhance the functionality of the display. The overhead graphic commands attention.
• The base kit includes a heavy-duty aluminum frame, steel base, steel slotted uprights, two towers on both sides to hold slatwalls, fixtures, and graphics, four slatwall panels (two on each tower), and an overhead SEG push-fit graphic. The kit allows you to choose between an all-white, black, or silver color scheme. The display is easy to assemble and install, and it comes with a lifetime hardware warranty against manufacturer defects.
• Optional accessories for the MODify 4-Sided Kit 03 include towel bars, faceout bars, waterfalls, U bars, slatwall hooks, and shelves.
• The assembled unit dimensions are 148W x 144H x 39D (3759.2mm(w) x 3657.6mm(h) x 990.6mm(d)), with an approximate weight of 446 lbs (202.302 kg). The graphic material used is dye-sublimated fabric. Please refer to the graphic templates for specific graphic sizes.
• For shipping, the kit is packed in one box with shipping dimensions of 96L x 24H x 42D (2438.4mm(l) x 609.6mm(h) x 1066.8mm(d)). The approximate shipping weight is 540 lbs (244.94 kg).
• Note: The product specifications are subject to change without prior notice, and all dimensions and weights provided are approximate.

Product Usage Instructions

Tools Required:

• MULTI HEX KEY (INCLUDED)
• PHILLIPS SCREW DRIVER (NOT INCLUDED)

How to Apply & Remove Graphics

Installation:

1. Push the SEG bead into each corner of the frame (1-4) with your thumb.
2. Push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly.
3. If necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
   Note: Keep the setup area clean by using a drop cloth, washing hands before setup, or wearing gloves.

Removal:
Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Please refer to the related graphic templates for more information on graphic bleed specifications. For additional assistance, you can also visit https://www.theexhibitorshandbook.com/downloads/download-graphic- templates.

INTRODUCTION

• MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
• MODify 4-Sided Kit 03 creates a four-sided arch retail display. Incorporating panels of slatwall and SEG push-fit graphics, this display is ideal for not only merchandising and branding, but for accessible storage as well. MODify with optional fixtures such as shelves, hooks, hang bars, and waterfalls. The overhead graphic commands attention.

features and benefits

Base Kit includes:

• Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
• Heavy-duty aluminum frame, steel base
• Steel, slotted uprights
• Two 36”W x 144”H towers on both sides hold slatwalls, fixtures and graphics
• Four 36”W x 96.5”H slatwall panels, two on each tower
• Overhead 140.5”W x 50”H” SEG push-fit graphic front and back commands attention
• Display is easy to assemble and install
• Lifetime hardware warranty against manufacturer defects

Optional Accessories Include:

• Towel bars.
• Faceout bars
• Waterfalls
• U bars
• Slatwall hooks
• Shelves

dimensions

• Hardware
  • Assembled unit:
  • 148”W x 144”H x 39”D 3759.2mm(w) x 3657.6mm(h) x 990.6mm(d)
  • Approximate Weight: 446 lbs / 202.302 kg
• Graphics
  • Graphic material: Dye-sublimated fabric
  • See graphic templates for graphic sizes.
• Shipping
  • Packing case(s): 1 Box
  • Shipping dimensions: (96″L x 24″H x 42″D) 2438.4mm(l) x 609.6mm(h) x 1066.8mm(d)
  • Approximate shipping weight: 540 lbs / 244.94 kg

additional information

MODify Accessories

Slotwall Accessories

U-Bar Accessories

Shelf and Hanger Bars

Tools Required

How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

• Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
• Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.

Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

SETUP INSTRUCTIONS

Kit Hardware BOM

Kit Graphics BOM

References

• The Exhibitors' Handbook
• Downloadable Resources

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>