Display Pros 2010 Blaze Wall Light Box User Guide

Blaze Light Box 2010 – Wall

Blaze Wall Mounted Light Box 2010 is 20’w by 10’h and features a durable 4” aluminum frame in your choice of Silver, White or Black. Perimeter, interior LED light bars are pre-attached to the frame and make the box GLOW. The light bars feature an internal power supply, which means no separate power supplies within the frame, minimizing shadowing and cord management.
Two backlit graphic material options are available to choose from, Backlit Textile (dye-sublimation printed) and Intensity (UV/LED printed).
Backlit Textile is a tightly woven fabric that is slightly stretchy, foldable and washable; it is best for multiple uses. Intensity is a material that has a smooth, coated finish. The double-strike process creates vibrant backlit graphics.
Simply assemble the frame, hang, install the graphic and plug in!
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications

features and benefits:

– 20’W x 10’H
– 4” light boxes feature a sleek, aluminum frame
– Available in white, black or silver
– Perimeter LED light bars are pre-attached to the frame
– Light bars feature an internal power supply, which means no separate power supplies within the frame
– Easy to assemble, comes with hanging hardware
– UL Certified & ADA compliant sizing, approved for public spaces
– 5 year LED warranty on lights; long life span – 43,800 hours for 5 years if powered 24/7
– Lifetime warranty on frame

dimensions:

Hardware
Assembled unit:
240”w x 120”h x 4”d 6096mm(w) x 3048mm(h) x 101.6mm(d)
Approximate Weight: 190 lbs / 86.1826 kg
Graphics
Graphic material: Backlit Textile (dye-sublimated fabric) or Intensity (UV printed)
See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here
Shipping
Packing case(s): 4 Boxes
Shipping dimensions: 3 x BOXES (79″L x 9″H x 11″D) 2006.6mm(l) x 228.6mm(h) x 279.4mm(d) 1 x BOX (18″L x 12″H x 4″D) 457.2mm(l) x 304.8mm(h) x 101.6mm(d)
Approximate shipping weight: 219 lbs / 99.3367 kg
additional information:

Powder coat color options:

Tools Required

| MULTI HEX KEY
(Included)
---|---
| PHILLIPS SCREW DRIVER
(Not Included)

How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using adrop cloth, washing hands before set-up or by wearing gloves.Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

LED Lights

NOTE: A maximum of 20 LED fixtures can be connected in a line.

EXTRUSION-WITH MITRE CUT LEFT END FOR CB10-IB2 LOCK HOLE RIGHT END-WITH GROMMET  HOLE 250MM FROM LEFT END
4| | CB10-IB2 LOCK HOLE LEFT END
EXTRUSION-WITH MITRE CUT RIGHT END FOR 1524MM (60.00in) LENGTH OF 347
6| | 1508MM LENGTH OF PH EXTRUSION-WITH IB2
LOCK HOLES ONE SIDE-CAM LOCK ONE SIDE
3| | CB10-IB2 LOCK HOLE RIGHT END
EXTRUSION-WITH MITRE CUT LEFT END FOR
1524MM (60.00in) LENGTH OF 347
4| | 1524MM (60.00in) LENGTH OF 347
EXTRUSION-WITH IB2 LOCK HOLES BOTH ENDS
1| | 8FT POWER CORD FOR LED-EV LIGHTS
4| | BLAZE LIGHTBOX WALL BRACKETS (2-BRACKETS, 4-SCREWS, 4-ANCHORS)
24| | 10″ LED AC LIGHT BAR 6000 K
12| | 19″ LED AC LIGHT BAR 6000 K
1| | LINER (A1) (243.88 w X 123.88 h total size ) 239.88 w X 119.88 h finish size, Opaque Liner, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner

STEPS

1. Mount top brackets to wall studs.
2. Assemble frame on floor and add liner to back.
3. Hang frame on top brackets.
4. Mount bottom wall brackets to wall and secure frame.

SETUP INSTRUCTIONS

size, UV/LED print on
Backlit Intensity, single sided, sewn with silicone beading around perimeter & pull tab in bottom right corner

References

• The Exhibitors' Handbook
• Downloadable Resources

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>