HARBOR HBROBF118B 118L Outdoor Beverage Chiller User Guide
- June 4, 2024
- HARBOR
Table of Contents
HARBOR HBROBF118B 118L Outdoor Beverage Chiller
Installing Your Beverage Centre
Two person installation: Use two or more able-bodied people to move and install the beverage centre. Failure to do so could result in injury.
Floor surface: This beverage chiller must be properly positioned on a dry, sturdy, level surface that is strong enough to support it when it is fully loaded.
Tropical rating: This rating allows the beverage chiller to be operating effectively in temperatures up to 43º C. Before connecting the beverage centre to the power source, let it stand upright for approximately 8 hours. This will allow any refrigerant gases that may have been disturbed during the transportation process to settle and reduce the possibility of a malfunction in the cooling system. For a complete installation guide, refer to the user manual page 11–13.
Positioning the shelves
Position the shelf supports inside the racks on the sides at your desired levels. You can place the shelves firmly on the supports and begin to load your contents.
The Controls
-
Temperature Control: Up Button
-
Temperature Control: Down Button Press the Up or Down buttons to increase or decrease the temperature inside the Beverage Chiller cabinet in 1° intervals.
-
LED Display
-
Indicator Lights The left indicator refers to the Cooling Symbol:
The right indicator refers to the Defrost Symbol: -
Set Temperature Button Press this button to set the desired temperature.
-
Defrost Button Press this button to manually activate the defrost cycle.
-
Light Function Press the UP Button to turn the light on or off.
Support: 1300 11 43 57