BLAZE 0604 Wall Mounted Light Box User Guide

: June 13, 2024
: BLAZE

Table of Contents

BLAZE 0604 Wall Mounted Light Box
Product Usage Instructions
Features and Benefits
Dimensions
Tools Required
How to Apply & Remove Graphics
LED Lights
SETUP INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLAZE 0604 Wall Mounted Light Box

Product Information:

The Blaze Wall Mounted Light Box 0604 is a 6’w by 4’h light box featuring a durable 4″ aluminum frame. It is available in three color options: Silver, White, or Black. The light box comes with pre-attached perimeter LED light bars that create a glowing effect.
The light bars have an internal power supply, eliminating the need for separate power supplies within the frame and reducing shadowing and cord management issues.

There are two options for backlit graphic materials: Backlit Textile (dye- sublimation printed) and Intensity (UV/LED printed).
Backlit Textile is a tightly woven, slightly stretchy, foldable,and washable fabric, suitable for multiple uses. Intensity is a material with a smooth, coated finish that creates vibrant backlit graphics using a double-strike printing process.

Product Usage Instructions

Assemble the frame according to the provided instructions.
Choose the desired backlit graphic material (Backlit Textile or Intensity) and install it on the frame.
Hang the assembled light box on the wall using the provided hanging hardware.
Plug in the light box to activate the LED light bars.

Features and Benefits:

Dimensions: 72″w x 48″h x 4″d (1828.8mm x 1219.2mm x 101.6mm)
Sleek aluminum frame available in white, black, or silver
Pre-attached perimeter LED light bars
Internal power supply for the light bars
Easy assembly with included hanging hardware
UL Certified & ADA compliant sizing, approved for public spaces
5-year LED warranty on lights with a long lifespan of 43,800 hours for 5 years of continuous use
Lifetime warranty on the frame

Additional Information:

Please note that specifications are subject to change without prior notice. All dimensions and weights provided are approximate.
For graphic bleed specifications and more information, refer to the related graphic templates available at
this link.

Powder Coat Color Options:

The available powder coat color options for the frame are not specified in the user manual.

Tools Required:

MULTI HEX KEY (Included)
PHILLIPS SCREW DRIVER (Not Included)

How to Apply & Remove Graphics:

Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly. If necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.

Graphics Storage & Care:
When storing graphics, fold them with the graphic facing inward and store them in a zip lock or sealable plastic bag. Spot clean the graphics by wiping them with a damp white cloth. If washing is necessary, use a commercial-size front-loading washing machine on a gentle cycle with cool water. Line dry the graphics flat. Dry cleaning is not recommended to prevent shrinkage.

Blaze Light Box 0604 – Wall

Blaze Wall Mounted Light Box 0604 is 6’w by 4’h and features a durable 4″ aluminum frame in your choice of Silver, White or Black. Perimeter, interior LED light bars are pre-attached to the frame and make the box GLOW. The light bars feature an internal power supply, which means no separate power supplies within the frame, minimizing shadowing and cord management.
Two backlit graphic material options are available to choose from, Backlit Textile (dye-sublimation printed) and Intensity (UV/LED printed).
Backlit Textile is a tightly woven fabric that is slightly stretchy, foldable and washable; it is best for multiple uses. Intensity is a material that has a smooth, coated finish. The double-strike process creates vibrant backlit graphics.
Simply assemble the frame, hang, install the graphic and plug in!

Features and Benefits

6’W x 4’H – 4″ light boxes feature a sleek, aluminum frame
Available in white, black or silver
Perimeter LED light bars are pre-attached to the frame
Light bars feature an internal power supply, which means no separate power supplies within the frame
Easy to assemble, comes with hanging hardware
UL Certified & ADA compliant sizing, approved for public spaces
5 year LED warranty on lights; long life span
43,800 hours for 5 years if powered 24/7
Lifetime warranty on frame

Dimensions

Hardware	Shipping

Assembled unit:

72”w x 48”h x 4”d

1828.8mm(w) x 1219.2mm(h) x 101.6mm(d)

Approximate Weight: 56 lbs / 25.4012 kg

| Packing case(s):

2 Boxes

Shipping dimensions:

1 x BOX (74″L x 9″H x 11″D)

1879.6mm(l) x 228.6mm(h) x 279.4mm(d)

| 1 x BOX (18″L x 12″H x 4″D)

457.2mm(l) x 304.8mm(h) x 101.6mm(d)

| Approximate shipping weight: 67 lbs / 30.3907 kg
Graphics
Graphic material: Backlit Textile (dye-sublimated fabric) or Intensity (UV printed)|
See graphic templates for graphic sizes.|
| additional information:
|

Powder coat color options:

Refer to related graphic templates for more information Visit:

https://[www.theexhibitorshandbook.com/](http://www.theexhibitorshandbook.com/) downloads/download-graphic-templates or click here

|

Tools Required

How to Apply & Remove Graphics

Installation and removal of SEG graphics is easy! Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves. Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.

Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.