BLAZE ID205L Cactus Kids Smart Watch Instruction Manual
- June 6, 2024
- BLAZE
Table of Contents
BLAZE ID205L Cactus Kids Smart Watch
Bind Watch
Download and install App
You can set up the watch through the VeryFitPro app for iOS or Android
devices. The steps are shown as follows: Notes: The hardware platform of the
equipment system shall meet requirements.
Bind process![BLAZE ID205L Cactus Kids Smart Watch FIG 2]](https://manuals.plus/wp-content/uploads/2022/03/BLAZE-ID205L-Cactus-Kids- Smart-Watch-FIG-2.png)
Notes:
- During binding process, VeryFitPro will prompt you to enable GPS and Bluetooth, and authorize VeryFitPro to get access to the GPS on you mobile phone.
- iPhones will not prompt you with any information unless you complete Bluetooth pairing on your ID205L watch in the built-in Bluetooth in you mobile phone after binding.
Synchronous Data
In daily wear, the watch can detect all kinds of product data. The user needs
to connect the watch with bluetooth on the APP before synchronous operation.
The detailed operations are shown as follows:
Open the mobile APP> swipe down the page> sync prompt appears
Notes!
- Please synchronize the data at least once within 7 days to avoid data loss at the watch end.
- The Apple phone also needs to be connected to the paired watch in the bluetooth setting interface of the mobile phone, so that the watch can be alerted. The steps are shown as follows:
Open the 1OS phone > set > bluetooth > search and click pair
instruction for Use
-
Charging schematic
Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time.
-
Wear/install
Wear the device a finger’s distance from the wrist bone and adjust the
tightness of the wristband to a comfortable position.
Flip the switch and take out the wristband
Tip: Wearing too loosely may affect the accuracy of heart rate data.
Operating Instructions
-
Definition of key function short
press the right key:
Return to the previous interface
Long press the right key: start -
Watch dial switch Replacing the dial interface will appear after long-pressing the dial.
-
Main interface operation wipe the screen to enter different interfaces (interactive interface tile diagram)
Function Introduction
Notes: For more functions (sleeping) and operation, please check the VeryFitPro software of the mobile phone.
Start sports
CD Enter sports
Click the sports icon > select the sports type > enter the sports countdown
automatically
@ During sports
Pause sports: short press the right key
Restore sports: short press the right key
® End sports
End sports: long press the right key> select the end button on the screen
Women’s health tracking
Display location: in the data bar
Women’s health tracking function, which is used for recording menstrual changes, tracks individual menstrual cycle and predicts ovulation (it needs to be enabled on the APP).
Product Parameters
Cleaning and Maintenance
It is recommended to wear and maintain according to the following three
points:
CD Keep the product clean;
@ Keep the product dry;
® Do not wear it too tight.
- Do not use household cleaners to clean the watch, but use the soap free detergent.
- It is recommended to use alcohol to scrub stains that are not easy to remove.
Frequently Asked Questions
-
Mobile APP search for the watch failed
CD It is recommended to update VeryFitPro to the latest version. @ It is recommended to close all programs, restart the Bluetooth, and then connect. ® Confirm whether the mobile phone system meets Android 4.4 or 1OS 8.0 or above. -
The watch received no alerts, text messages or phone calls CD You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch. @The iphone needs to be paired with the watch via Bluetooth. (Please check the column of “Synchronous Data” for details) ® You need to keep your watch connected to Bluetooth.
-
Bluetooth is often disconnected
CD If the distance between the watch and the mobile phone is too far, the connection effect of more than 7m Bluetooth is obviously weakened. -
@ Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connection signal. ® Whether the bluetooth function of the mobile phone is abnormal.
-
About data backup
The data of the watch is synchronized at least once every 7 days to the mobile phone (the watch end only keeps the data of the last 7 days). -
How to restart and restore factory settings Shutdown operation: Watch > set > shutdown/right-key restart Restore factory settings: connect watch to APP > open APP device model > more settings
-
Do I need to keep my bluetooth on when I wear my watch? CD For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the
mobile phone all the time. If you only need to wear a watch
when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
@ For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone.
More detailed questions can be answered with help and feedback in the APP. Operation steps:VeryFitPro > °’ > help and feedback
Safety and Product Information Notes
Battery warning
Do not disassemble, bore or damage the battery. Do not disassemble the built-
in batteries of non-replaceable battery devices. Do not use sharp objects to
remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitoring strap.
The watch’s optical heart rate sensor glows green and flashes. If you suffer
from epilepsy or are sensitive to blinking light sources, please consult your
physician if you can wear this product.
The device tracks your daily activities through sensors. These data are
intended to tell you about your daily activities, such as steps, sleep,
distance, heart rate and calories, but may not be completely accurate.
The device, accessories, heart rate sensors and other relevant data are
designed for entertainment and fitness, not for medical purposes. They are not
applicable to the diagnosis, monitoring, treatment or prevention of any
diseases or symptoms. The heart rate data is for reference only. We are not
responsible for any consequences caused by any data deviation.
Cycling Warning
Please maintain good judgment at all times and ride in a safe manner. Make
sure your bike and hardware are properly maintained, and all components are
properly installed. Matters Needing Attention
- Watch data needs to be kept once every 7 days to avoid data loss.
- The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.
- Sports mode supports up to 6 hours of exercise at a time.
- The watch has a waterproof level of 5ATM and supports cold water shower, swimming, but not diving.
- Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.
- When your heart rate is measured, keep your arm still during the test.
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS
Directive 2011/65/EU and revised directive.
This device con1plies v1ith Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment. TI-us
equipment has been tested and found to comply with the lin1its for a Class B
digital device, pursuant to Pait 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipn1ent generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance ith the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a paiticular
installation.
If this equipment does cause harmfitl interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following n1easures:
- Reorient or relocate the receiving antenna.
- Increase the sepai·ation between the equipment and receiver.
- Co1u1ect the equipment into an outlet on a circuit different fron1 that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
RJSK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Old electJ.ical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to a similar co!Junction points. With thjs little personal. effo1t, you contribute to recycling valuable raw materials and the treatment of toxic substances.