CAME-TV TIOGA Series 660 High Output LED Spotlight User Manual

User Manual
TIOGA Series

660D/ 660B

Introduction

1. 660D,600B feature high-power COB LEDs with a lifespan of up to 50,000 hours. These LEDs have a standard color temperature with a CRI & TLCI1295.
2. Built-in NTC temperature detection to automatically control the fan and prevent overheating to ensure along product life.
3. Dimmable 0- 100% and flicker-free due to the PWM integrated design.
4. pre-installed special effect modes, to help you create the perfect scene. In each mode, brightness and speed are adjustable. And for 600B, the color temperature is adjustable as well.
5. Optional battery power via V-lock battery mounts on control box.
6. Software updates via USB.
7. Available control option: control box, DMX console, remote control or mobile phone APP
8. Use any Bowens mount accessory, such as the included customs designed standard reflector.
9. Solid aluminum shell provides durability and enhanced heat dissipation for a long product life.
10. 360° adjustable, all metal U-bracket featuring disc brake locking function for safely mounting and achieving any angle needed.
11. LED heat prevention technology ensures that your light will emit steady and accurate light under varying conditions.
12. The LCD displays real-time data for color temperature and brightness.
13. Suitable for indoor and outdoor photography and videography. Great for studio and location shoots including TV, film, portrait photography and more.

Precaution

1. ALWAYS remove the protective cover before using your light.
2. ALWAYS press accessory lock button on the bottom of the light when removing accessories such as the standard reflector, barn doors or optional zoom lens. Failure to do so may damage your light.
3. During use, avoid dirt or debris from contacting the surface of the COBLED to prevent damage to the light.
4. HOT! DO NOT TOUCH! Keep flammable substance at least 4 inches( | 0Qmm) away from the surface of the LED.
5. Do not block the heat dissipation vents on light body. Blocking these will inhibit airflow, causing the unit to overheat and stop working. This may shorten the lifespan of the light.
6. Do not operate with wet hands, doing so may cause electric shock.
7. Do not operate in environments near flammable gases or volatile liquids as this may increase the risk of explosion/fre.
8. Do not operate in enclosed spaces where heat buildup can be extreme, such asa car on a sunny day. The increased heat will trigger the auto heat protection function and affect use. Frequent overheating may cause premature failure of the light unit.
9. Do not damage, disassemble, twist or modify the power cord as it may increase the risk of fire or electric shock.
10. Do not place under heavy objects.
11. Keep the light surface clean with a soft, dry cloth. If build-up is noticeable, use isopropyl alcohol on a soft, clean clothto gently remove debris. Ensure the LED is off and cool, then wipe gently WITHOUT pressing on the surface of the COB LED.
12. ONLY use the power control box provided with this product. Should you need a replacement, please contact us.
13. Avoid impact to the LCD screen; impact may damage it.
14. Use the safety cable when hanging the fixture.
15. When using the accessories, please ensure that they are properly and securely installed. Improperly installed accessories may fall and become damaged.

Part Name

light :

A. Bowen mount
B. Bowens mount accessory lock button
C. Angle adjustment & locking handle
D. DC power input socket
E. Integrated carrying handle
F. U-type bracket
G. Stand mount locking screw

power control box:

A. Power control box handle
B. Menu buttons
C. Multi-function interface dial/button
D. LCD screen
E. V-lock battery plate
F. Fuse
G. Power button
H. AC Power input socket
I. DC power
J. DC output socket
K. USB port
L. DC input socket ( DC36-48V)
M. DMX IN socket
N. DMX OUT socket

Menu buttons on the power control box:

1. INT(brightness) button (660D) CCT (Color temperature) button ( 660B)
2. DMX button
3. Addr. Settings (Address setting) button
4. Lang.(Language) button
5. Fan button
6. Multi-function interface dial/button
7. FX (Special effect) button

Usage

Set up instructions:

1. Removal and installation of protective cover
   Press the Bowens mount accessory lock button of the light in the direction of the arrow shown in the figure, and at the same time turn the protective cover / standard reflector counterclockwise and pull it out, and turn it clockwise if you want to install the protective cover /standard reflector.
   NOTE: ALWAYS remove the protective cover before using your light.
   When the light is not in use, install the protective cover to protect the light from dirt or debris.
   

2. Installation and removal of the standard reflector.
   

3. How to set up the light
   (1)To mount on light support or stud: Loosen the stand mount locking screw by turning counterclockwise. Place the mount on the light stand and secure the screw by turning clockwise. Please ensure the light stand is fully mounted onto the light support and the screw is securely fastened.
   (2)When mounting to a | 1/8” (junior) stud, it will be necessary to remove the set screw using an M4 hex wrench.
   (3)Adjust the light to the desired angle by loosening the angle adjustment and locking handle by turning counter clockwise. Move the light to the desired position, then tighten the angle adjustment and locking handle by turning clockwise.
   

4. How to set up the power control box
   (l)Use the connecting cable to connect the light body to the power control box salign the red dots on the plug and socket, and then insert the plug to the socket. To unplug , pull up the collar of the connector to release its locking mechanism and disconnect it.

(2)Connect the AC power cable to the power control box via the AC power socket, align it with the locking slot as shown in the figure below, and then insert the power plug. Connect the AC power cable to the external power supply( AC 100-240V). To remove the
AC power cable, press down the spring lock and tum counterclockwise, and then pull it out.
NOTE: Remove batteries when using external AC power. Leaving batteries installed may cause damage to the control box or batteries. ALWAYS remove batteries when the light is not in use for extended periods of time.

Lishuai laboratory uses the Rolux Battery for testing the product working time:

total product power)
RL-190S (14.8V 190Wh)| 55 mins (60% of the
total product power)| 75 mins (60% of the
total product power)
612250 (26V 260Wh)| 45 mins (100% of the total product power)| 60 mins (100% of the total product power)

Operating instructions:

1. Press the power button to power the light ON or OFF
   

2. Control via power control box
   (1) Menu buttons introductions 660D menu buttons : INT(Brightness) button, FX button, Fan button, Addr. (Address) setting button, Lang.(language) button and Multi-function interface dial/button.
   660B menu buttons: Color temperature button, FX  button, Fan button, Address setting button, Language button and Multi-function interface dial/button.
   (2) Intensity (Brightness) and Color temperature button operation
   660D: Press the intensity button, then turn the multi-function interface dial to increase or decrease the brightness of the light. Brightness is adjustable from 0- 100%. 660B: Press the Color temperature button, then press the multi- function interface button to switch between the brightness and color temperature, turn the multi-function interface dial to adjust the brightness between 0- 100%, and the color temperature between 2700K-6500K.
   (3) FX button ( Special effect button)
   660D: Press the FX button, then press the multi-function interface button to switch between INT(brightness), mode and speed. Turn the multi-functional interface dial to control the brightness 0-100% , special effect and speed. The special effect mode includes lightning, fireworks, flash, breath, cop car, SOS, fault bulb, turn signal, tracing, screen, H&L beam.
   660B: Press the FX button, then press the multi-function interface button to switch between brightness, color temperature, mode and speed 0- 100%. Turn the multi- functional interface dial to control the brightness 0- 100% , color temperature 2700K-6500K, special effect and speed 0- 100%. The special effect mode includes lightning, fireworks, flash, breath, cop car, SOS, fault bulb, turn signal, tracing, screen, H&L beam.
   (4) DMX button
   Press the DMX button, turn the multi-function interface dial to change the address of the fixture. DMX address range is 1-512.
   (5) Fan button
   Press the fan button, turn the multi-function interface dial to change the speed of the fan between low, medium, high and auto.
   (6) Addr. ( Address) setting button
   Press the addr. setting button, turn the multi-function interface dial to change APP/remote address between | -| 2.
   Noted: RMT-OFF means that the remote control function can not be used.
   (7)Language button
   Press language button, turn the multi-function interface dial to switch system language between English and Chinese.
   (8)Fast and slow adjustments Press the multi-function interface button for 5 seconds or longer to switch between fast and slow adjustments. The indicator at the bottom of the LCD will change between fast and slow to indicate which adjustment mode is active.

3. How to use CAME-TV Tioga APP
   You can search CAME-TV Tioga in APP store or Android market or scan the QR code below to download the APP to control lights.|
   ---|---
   https://play.google.com/store/apps/details?id=com.cametv.tioga| https://apps.apple.com/us/app/came-tv-tioga/id1645059354

Open the APP Select DAYLIGHT or BI COLOR to search for devices, click to search device and enter the control interface.
Set APP address the same as on the light. The APP address can be set | -12.
Now the light can be controlled by the mobile APP. The Brightness, color temperature, special effects, language and APP address can be adjusted.

4. DMX connection
   When using DMX function, connect the DMX cable to the DMX console (see the figure below). Set the DMX address to desired address for control on the DMX console.
   

5. DMX control:
   Please see below details of DMX address on LCD and corresponding channels on DMX console.

LCD display address| DMX console channels
(single color temperature)| DMX console channels (Bi-color temperature)
---|---|---
I| I-I(Brightness)| I -1(brightness),1-2(color temperature)
2| 1-2(Brightness)| I -2(brightness),1-3(color temperature)
…………..| …………..| …………
I 6| I -16(Brightness)| I -16(brightness),2-1(color temperature)
I 7| 2-1(Brightness)| 2-1(brightness),2-2(color temperature)
………………..| …………….| ……….
511| 32- 15(Brightness)| 32-15(brightness),32-1 6(color temperature)
512| 32-16(Brightness)|

Product specifications

Model
Spec| 660D| 66013
---|---|---
LED| 600W COB| 400W daylight+400W tungsten
Beam angle| 120°
CRI| 296| 295
Color temperature| 5600K(±300K)| 2700K(± 200K)-6500K(± 300K)
TLCI| 296| 297
Power input| 660W| 500W max
Working voltage| AC100-240V,DC36-48V
Cooling system| Heat pipe radiator , Temperature controlled fan
Dimension
(light body)| 10.4 x 12.1×16.812.1 x 16.8″ (263x307x426MM)
Dimension (power control box)| 12.8x 7.3 x8.3″ (325x185x2 I 2MM)
Weight| Light body: 12.1 lb (5.49kg),
Power control box: 11 lb (5kg)| Light body: 12.1 lb (5.49kg),
Power control box: 8.5 lb (3.85kg)
Included accessories| Standard reflector, Protective cover, Power cable, DMX cable, Connecting cable,
Safety cable, Custom carrying case

660D illuminance:

660B illuminance without reflector :

Color temperature
Distanc Il uminanc| 2700K| 3200K| 4400K| 5600K| 6500K
---|---|---|---|---|---
2m| 2923Lux| 3490Lux| 4105Lux| 42 1 5Lux| 39 I 4Lux
3m| 1334Lux| 1608Lux| 1897Lux| 1943Lux| 181ILux
5m| 510Lux| 6 I 5Lux| 723Lux| 742Lux| 692Lux
7m| 263Lux| 3 1 8Lux| 374Lux| 384Lux| 358Lux
9m| I 70Lux| 205Lux| 24 I Lux| 247Lux| _ 231 Lux

660B illuminance with standard reflector |5°:

Color temperature ‘ll uminance”
Distance| 2700K| 3200K| 4400K| 5600K| 6500K
---|---|---|---|---|---
2m| 21371 Lux| 26324Lux| 3 I 766Lux| 3 I 762Lux| 29783Lux
3m| 83I3Lux| I 0357Lux| 12320Lux| I 2269Lux| I I 598Lux
5m| 2716Lux| 3407Lux| 4022Lux| 40I7Lux| 3766Lux
7m| 1354Lux| 169ILux| I995Lux| 20I9Lux| I 884Lux
9m| 836Lux| I042Lux| 1222Lux| 1240Lux| 1160Lux

*The specifications and parameters of this product are tested according to the laboratory samples of our company. There may be a little difference in the finished products, which will not affect the normal use; The design and specifications are subject to change without notice.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part |5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>