CAME-TV 110V Dual Battery Charger Power Inverter Strip User Manual

: June 5, 2024
: CAME-TV

Table of Contents

Instructions
Specifications
Important Notes
After sales Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**CAME-TV 110V Dual Battery Charger Power Inverter Strip User Manual

**

We are proud to introduce this versatile power station that brings convenience to your life. This power station is not only an inverter, capable of converting one or two 14.4V V-mount batteries into AC output, but also features multiple interfaces for easy connection to different devices. Additionally, it serves as an efficient battery charger, capable of simultaneously charging two V-mount batteries. Even without batteries, it can be used as a practical power strip, providing you with even more convenience.
Our product design philosophy aims to achieve a perfect combination of high performance and compact size. To ensure that the device maintains stability and extends its service life during high-load operations, we have adopted a high-speed fan for cooling. The high-speed fan can provide greater airflow within a limited space, effectively removing heat. However, this also means that the fan will generate a certain level of noise during operation.

Instructions

Green dot : Switch on Gray dot: Switch off
Battery Voltage
Battery Current (Any side exceeding 9A will stop output)
Battery Level
- Power on AC output:
- Press the AC button for 2 seconds, then release it and wait for 4 seconds for the AC to output
Display screen
Type-C 65W output
Main switch button
USB output
DC output
USB&DC switch button
D-tap output
LED lighting
LED light switch button
AC switch button
AC output socket
AC input
Battery plate
Storage drawer

Specifications

Cases	AC Input	Mount Battery	Maximum Output
1	NO	Two Batteries(The voltage difference between the two batteries is less
than 0.1 V )	AC 220 W(Max.) or DC 180 W(Max.) or AC+DC=220 W(Max.)
2	NO	One Battery	AC 100W(Max.) or DC 100W(Max.)orAC+DC=100W(Max.)
3	YES	Two Batteries	AC 220 W(Max.)+ DC 180 W(Max.)
4	YES	One Battery	AC 220 W(Max.)+ DC 165 W(Max.)
5	YES	No Battery	AC 220 W(Max.)+ DC 65 W(Max.)

Important Notes

Secure AC Startup: To maximize inverter longevity, initiate AC power by holding the AC button for 2
seconds, then releasing it and allowing 4 seconds for the AC to stabilize before plugging in devices into the AC Outlet.
Optimal Battery Capacity: For consistent performance and extended battery life, we recommend using 99 Wh or higher capacity batteries. Smaller batteries have lower current protection thresholds, increasing the risk of overcharging or over discharging.
Built-in Overload Protection: Each inverter side features 9A current protection to safeguard battery
health. Exceeding 9A on either side will automatically trigger the automatic protection feature and will
disable the output. To reset, power off the unit, remove any batteries and devices plugged in, and restart the Power Station.
Balanced Power Utilization: Optimal performance is achieved with two fully charged batteries. Uneven voltages may cause the inverter to prioritize the higher voltage battery while waiting for the other to reach a sufficient level for simultaneous operation.
Prioritized Charging: During dual battery charging, the charger prioritizes the battery with the significantly lower voltage. Once voltages become balanced, simultaneous charging commences.
Power Overload Recovery: Should the device activate automatic protection due to exceeding maximum power draw, simply disconnect it or perform a restart to restore normal functionality.
D-Tap Output Dependency: The D-Tap output relies on the connected battery for power. With no battery present, the D-Tap port will remain inactive.
Controlled Power Distribution: There are 4 power switches that control different functions such as the Main power for charging batteries, powering on the LED Light, enabling power on the USB & DC Outputs, and a switch to activate the AC Inverter. You can enable and disable each part of the CAME-TV Power Station as required.