CHAMBERLAIN G0301 MyQ Smart Garage Hub User Guide
- June 13, 2024
- CHAMBERLAIN
Table of Contents
CHAMBERLAIN G0301 MyQ Smart Garage Hub
Product Information
The myQ Smart Garage Control Hub is a device that allows you to control and monitor your garage door using the myQ app. It is compatible with sectional doors only. The device is registered under the trademarks myQ, Chamberlain, LiftMaster, and Smart Garage, which are owned by The Chamberlain Group LLC. The product is protected by patents, and more information can be found at chamberlaingroup.com/patents. The model numbers supported by this device are MYQ-G0402 and 821LMC-SENSOR.
Product Usage Instructions
Add a New Door Sensor to a Second Garage Door Opener:
- Open the myQ app on your smartphone or tablet.
- Follow the instructions provided in the app to add a new door sensor to your second garage door opener.
Replace an Existing Door Sensor:
- If the current door sensor is still operating and connected to a garage door opener, press the test button on the existing door sensor. The hub will beep once if it is door 1 or beep twice if it is door 2.
- If the current door sensor does not work and you have two door sensors connected to the hub, press the test button on the other door sensor. The hub will beep once if it is door 1 or beep twice if it is door 2.
- Select the corresponding button on the hub for your new door sensor.
- Remove the pull tab from the new door sensor to activate the battery.
- On the hub, press the button for door 1 or 2 (depending on the information from steps 1 and 2). A solid amber LED light will appear.
- On the new door sensor, press and release the test button. The hub will flash and beep, indicating successful programming.
Mount the Door Sensor:
Install the new door sensor on the top panel of your garage door, with the
top facing up. You can use the included fastening strips or optional screws to
securely mount the door sensor.
Test Door Sensor Battery:
Test your door sensor every 6 months or if the myQ system is not working as
expected. Press and release the test button on the doorsensor. The LED on the
door sensor should blink, and the hub should beep. Repeat this test 5 more
times, waiting 5 seconds between eachtest. If the LED doesn’t blink or the hub
doesn’t beep with each press, replace the battery in the door sensor with a
K010A0056 Door Sensor 3V Battery (CR2450).
Product Support:
This device complies with Part 15 of the FCC rules and Industry Canada’s
license-exempt RSSs. It is designed to avoid harmful interference and accept
any interference received. Any changes or modifications not approved by the
responsible party may void the user’s authority to operate the equipment.
Install the device witha minimum distance of 20 cm (8 in.) between
users/bystanders and the device. The device has been tested and found to
comply with the limits for a Class B digital device under FCC rules and
IndustryCanada ICES standard, providing reasonable protection against harmful
interference in a residential installation.
WARNING:
To reduce the risk of SEVERE INJURY to persons:
- DO NOT enable the Smart Garage Control if operating either one-piece or swinging doors. Enable this device with sectional doors ONLY.
Within the US: The Smart Garage Control is not intended for use with garage door openers in which the photoelectric sensors located near the bottom of the garage door change power mode (e.g., lights on the sensors turn off after the door is closed), or anyChamberlain Group opener with a yellow learn button manufactured between 2010 and 2021, or any Linear opener.
WARNING : This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Compatible with
Smart Garage® Control
All versions of:
- MYQ-G0401
- 821LMC
myQ® Smart Garage® Hub
All versions of:
- MYQ-G0301
- 821LMB
myQ Garage®
All versions of:
- MYQ-G0201
- 821LM
NOTE : Your Hub has the capacity to program two Door Sensors. This Sensor can either be added to a second Garage Door Opener or replace an existing inoperable Door Sensor
TO ADD A NEW DOOR SENSOR TO A SECOND GARAGE DOOR OPENER GO TO THE myQ APP
TO REPLACE AN EXISTING DOOR SENSOR
- If the current Door Sensor is still operating and connected to a Garage Door Opener, press the test button on the existing Door Sensor. The Hub beeps one time if the current Door Sensor is door 1 or beeps twice if door 2. 2. If the current Door Sensor does not work and you have two Door Sensors connected to the Hub, press the testbutton on the other Door Sensor. The Hub will beep once if the other Door Sensor is door 1 or beep twice if door
- You will need to select the other button on the Hub for your new Door Sensor.
- Remove the pull tab from the new Door Sensor to activate the battery.
- On the Hub, press the button for door 1 or 2, depending on the information from steps 1 and 2 above. A solid amber LED light will appear.
- On the new Door Sensor, press and release the Test button. The Hub will flash and beep indicating successful programming.
- Mount Door Sensor (instructions to the right).
- In the myQ app, check that you can open and close your garage door to confirm successful programming.
TEST DOOR SENSOR BATTERY
Test your Door Sensor every 6 months or if the myQ system is not working as
expected Press and release the test button on the Door Sensor, the LED on the
Door Sensor shouldblink and the Hub should beep. Wait 5 seconds, then repeat
this test 5 more times (wait 5 seconds between each test). If the LED doesn’t
blink or the Hub doesn’t beep with each press, replace the battery in the Door
Sensor.
Replacement Part : K010A0056 Door Sensor 3V Battery, CR2450.
MOUNTING INSTRUCTIONS
PRODUCT SUPPORT
- Download the Chamberlain® Smart Garage Control Owner’s Manual
- Download the LiftMaster® Smart Garage Control Owner’s Manual
NOTICE : This device complies with Part 15 of the FCC rules and Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:
-
1. this device may not cause harmful interference, and - this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device must be installed to ensure a minimum 20 cm (8 in.) distance is maintained between users/bystanders and device. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules and Industry Canada ICES standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
One Year Limited Warranty:
The Chamberlain Group LLC warrants to the first consumer purchaser of this
product that it is free from defect in materials and/or workmanship for a
period of 1 year from the date of purchase.
myQ, the myQ logo, Chamberlain, LiftMaster and Smart Garage are registered
trademarks of The Chamberlain Group LLC. Patented and patents pending. See
chamberlaingroup.com/patents
© 2023, The Chamberlain Group LLC All Rights Reserved 114-5736-000B