HKoenig TWT77 Handheld textile cleaner Instruction Manual

: June 13, 2024
: HKoenig

Table of Contents

SAFETY INSTRUCTIONS
PRODUCT VIEW
USE
MAINTENANCE
TECHNICAL INFORMATION
WARRANTY CONDITIONS
EXCLUSION OF WARRANTY
Environmental protection:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**HKoenig TWT77 Handheld textile cleaner Instruction Manual

**

SAFETY INSTRUCTIONS

This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Keep the appliance and its power cord out of reach of children under 8 years of age.
When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
Make sure that the voltage rating on the typeplate corresponds to your main voltage of your installation. If this is not the case, contact the distributor and do not connect the unit.
Never leave the unit unattended while in operation.
Please keep this document at hand and give it to the future owner in case of transfer of your device.
Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a risk.
This device is not intended for use by persons with reduced capacity on the physical, mental or sensory or lack of experience and knowledge, unless they have had instructions on the use of the appliance by a person responsible for their safety. Children should be supervised.
This appliance is intended for use in domestic and similar applications such as:
- kitchen areas in shops, offices and other working environments
- farmhouses
- in hotels, motels and other residential environments
- guest rooms
The machine is only used for household and indoor.
Never immerse the appliance, its power cord or plug in water or any other liquid
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
Do not use the unit to pick up toxic products (chlorine bleach, ammonia, drain cleaner, etc.), drain cleaner, etc.)
Do not use the unit to pick up hard or sharp objects such as glass, nails, screws, coins, etc.

Use of power cord and power plug:

Regularly dust power plugs.
Dust accumulation or moisture may lead to poor insulation, and may cause fire or electric shock. The power plug must be fully inserted into the power plug. Short circuit may cause fire and electric shock.
Please unplug the power cord from the socket for any maintenance.
Do not unplug if you have water stains on your hands. It may result in electric shock, burns or injuries.
Do not allow children to lick the power plug. It may result in electric shock or injury.
Do not bind wires when turning on the device. The power cord must be deployed before using the device.
Do not damage, fold or twist the power cord. Do not neither hang heavy object with the power cord. Damaged power cord may cause fire and electric shock.
Do not pull the power cord during transportation.
Do not use the power cord or power plug when it is exposed inside or loose in the socket. A short circuit can lead to fire and electric shock. If the power cord is damaged, please call a specific hotline.
Do not exceed freeze frame, Socket or extension plug on using. It may cause fires.
Do not use ac power other than 220-240V. It may cause fire.
Do not spray sprays (insecticide, hair conditioner, lotion, Lubricating oil, etc.).
Do not inhale flammable materials (lamp oil, gasoline, printer toner, etc.).
Do not inhale smoke or heat.
Do not inhale dry dust.
Do not approach inflammable objects, lighted cigarettes, incense, etc. It may cause fire.
In case of abnormality or breakdown, please stop using the device; turn it off, and unplug it. You can call a specific hotline.
If there is an unusual sound or smell, please stop using the device and call a specific hotline.
Do not disassemble, repair or modify the device. It may result in fire, electric shock and injury. For any maintenance or repairs, please call a specific hotline.
Do not place under the rain, in water, in bathroom and other damp areas.
Do not let the machine be sucked or doused under water. Fire and electric shocks may occur.
Do not inhale dustt, vomit, etc. It means it is infected. It can cause infectious diseases.
Do not use the device for any other purpose other than cleaning.
Do not use the device outside, out of domestic use.
Do not approach fire sources, greenhouse appliances, etc. The wind blowing out can cause a fire to flare up in a radiator and cause a fire.
Do not use the device when air nozzle is blocked by foreign body. Turn off if any problem occurs.
If the water is freezing, during low temperatures, pour out the water in the dust bin, cleaning tank, straw and spray gun.
Do not sit or lean on this product. Take the device away from children.
Do not use when suction is blocked.
When unplugging, do not hold the power cord, but hold the power plug. Damaged power cords may result in fire or electric shock.
Be sure to remove the power plug from the socket at the end of use.

Other warnings:

This product is used to remove dust by scrubbing. The water tank should not be filled with tap water more than 40 degrees and aqueous solution of alkaline ions.
Art crafts, water-weak fibers (silk, models, rayon and copper-ammonia silk fabrics, etc.), water-weak products (fur, leather products, soft clothing, solid wood furniture, lacquered wood products, lacquerware, etc.). Other easily scratched surfaces (floor, table top, etc.) should not be used.
Do not tilt or drop the host when it is filled with water. This may cause water leakage and wet the floor.
If there are too many bubbles in the dust tank, please stop using it when it exceeds the water level and dump the sewage. Otherwise it may lead to failure.
When using detergent, the low foaming detergent can be used 20 times diluted, smeared on the cleaning object after use.
When using detergent, please confirm whether it will affect the cleaning object before using. If the body is placed on a woolen blanket, it may cause the vent to be blocked and the machine to stop running.
After using the device in cold areas, be sure to discharge the residual water in the dust tank, cleaning tank, vacuum area and hose.
Do not use the device when air nozzle is blocked by foreign body. Turn the device off with such issue. If you keep using the device that is blocked/damaged; the motor can be overheated. In such case, please press Power switch [off], and unplug the power cord. Place in shade. About 1 hour later, the protective device is removed and can continue to use.
When moving the whole machine, please put the suction handle on the handle hanger, and the power cord is rolled in Power cord rack.

Do not inhale the following objects:

Large volume of garbage
Lots of sand and pebbles
Sharp gold, as of a pin or tack
Genus, glass, etc.
Plastic bags, stockings, silk stockings, etc
An object that is easily plugged internally
Do not inhale dry and wet dust.

PRODUCT VIEW

USE

Place the handle’s hanger on main body of the textile cleaner
Please make sure the lids of cleaning tanks are closed. Do not put water except tap water or alkaline ionized water into the water tank, otherwise it may lead to failure. Do not use water more than 40°C. Clear out the water from tanks after using the product. Storing water can cause leaks or mold.
Connection of the vacuum hose The hose is inserted into the interface of the host.
Connection of the handle The brush part (handle) is hanged to the host machine.
Open the clean water tank lid and pour in tap water
Plug in Before inserting the power plug into the socket, make sure that the power switch is turned off`
Press power switch to turn it on.
Cleaning Hold the handle with the nozzle pointing down, and press the jet handle several times. When you are spraying water, the handle is tilted. The handle should be slightly lower at the front and slightly higher at the tail, otherwise the water may not be smooth.
When spraying water, the nozzle at the front should aim at stain or dirt. Hold the suction handle tightly while spraying clean water while absorbing water.
Press the suction inlet on the sewage and pull the handle slowly forward. Water trickles down when you release the spray handle. Do not spray water continuously in the same place, the water is quickly absorbed after spraying, if the moisture remains in the depth of the texture, it may lead to mildew.
Please fix the suction handle and hose on their respective racks.

USE

Place the handle’s hanger on main body of the textile cleaner

Please make sure the lids of cleaning tanks are closed.
Do not put water except tap water or alkaline ionized water into the water tank, otherwise it may
lead to failure. Do not use water more than 40°C. Clear out the water from tanks after using the product. Storing water can cause leaks or mold.

Connection of the vacuum hose The hose is inserted into the interface of the host.
Connection of the handle The brush part (handle) is hanged to the host machine.
Open the clean water tank lid and pour in tap water
Plug in Before inserting the power plug into the socket, make sure that the power switch is turned off`
Press power switch to turn it on.
Cleaning
Hold the handle with the nozzle pointing down, and press the jet handle several times.
When you are spraying water, the handle is tilted. The handle should be slightly lower at the front and slightly higher at the tail, otherwise the water may not be smooth.

When spraying water, the nozzle at the front should aim at stain or dirt.
Hold the suction handle tightly while spraying clean water while absorbing water.
Press the suction inlet on the sewage and pull the handle slowly forward.
Water trickles down when you release the spray handle.
Do not spray water continuously in the same place, the water is quickly absorbed after spraying,
if the moisture remains in the depth of the texture, it may lead to mildew.
Please fix the suction handle and hose on their respective racks.

Suck the rest of the water up without spraying.
Press the suction inlet level on the sewage, and slowly pull back, please fully absorb the water,
sewage will be absorbed into the dust tank.
If too much moisture remains, mildew may develop.
Dry with a hair dryer after use on a texture prone to water accumulation.
WHEN IT COMES TO STUBBORN STAINS.
For the stains that are difficult to remove, you can use a detergent.
Do not put detergent into the cleaning tank. Only external use.
Before using detergent, test that there is no discoloration and other problems. If there isn’t any issue, you can normally use your detergent. Do not use diluents, volatile oils, chlorinated bleach or inflammable solvents or solvents
May cause discoloration, malfunction and fire
Recommended:
Strongly basic ionic water Soda Ash Citric acid Hypochlorous acid water Low foaming detergents, etc.…
Not Applecart :
Neutral detergent for kitchen Strong alkaline detergent Strong acid detergent High foaming detergents, etc., may cause foam to suck into the cleaner
- After having made test controlling, apply detergent on the carpet and scrub on the stains.
  About the amount and usage of detergent, please read the usage method and precautions carefully and use correctly.
- Suck up the stain
  When the stain floats, use the correct method to suck up the stain. It needs to be absorbed after filling tap water in the clean water tank.
  Warming water (always below 40 degrees) is even more effective.
  To avoid detergent residue, please absorb carefully.
  When the foam in the dust bin exceeds the full waterline, please stop the operation, and clean it up. Otherwise, water droplets may be immersed into the main engine.
  To avoid detergent residue, please absorb carefully.
  When the foam in the dust bin exceeds the full waterline, please stop the operation, and clean it
  up. Otherwise, water droplets may be immersed into the main engine.
Press the power switch to turn off the device.
Unplug the device.
Before removing the power plug, ensure that the power switch is turned off.
When removing the power plug, do not hold the round cord of the power cord. Be sure to remove the plug first.
After use, do not plug into the power supply, be sure to pull out the plug.
Remove and clear out the dust tank, and clean the water tank. Remove the vacuum hose and handle for storage.

Open the lid of the cleaning tank and let the water pour down through the injection port.
‘
Flush with running water from the rear opening of the dust bin at the end of operation.

If the sludge left inside the dust tank and vacuum hose is not cleaned up, it will lead to the reproduction of microorganisms and bacteria and give off odor.

The dust tank cover shall be covered according to the original installation method and installed back on the main engine.
Please make sure that the lid of the dust tank is properly closed.

Load the dust bin into the main machine.
If the dust tank is not properly loaded, the suction strength will be reduced.
Please pour out the sewage before it exceeds the full water level. If it continues to be used after the full water level, the automatic water absorption stop device will not continue to be used.
At the end of the product use, please remove the handle, vacuum hose and dust tank and let the main engine run for 5-10 minutes to dry the inside of the main device:

Press down on the handle buckle and pull out the vacuum hose connector

MAINTENANCE

During the maintenance, please be sure to turn off the device, and pull out the power plug.
Do not water the machine, which may cause electric shock, injury or failure.
Do not use detergent, thinner, volatile oil, bleach, etc.
Do not use chemical rags.
Main body
Use a soft cloth sucked in warm water (below 40 degrees) and wring dry, wipe dirt.
When the dirt is difficult to clean, please use a small amount of kitchen detergent to wipe the dirt, in order not to let the detergent residue, and then dry the water stains with a wring cloth.
Handle, dust bin, vacuum hose
Please remove it from the main machine after each use and dry it after washing.

Clean handle with water after removing transparent cover of suction inlet.
If the nozzle is blocked, please remove the blockage after cleaning.
Control there isn’t any damage on the vacuum hose.
Filter net

If the vacuum filter is blocked, clean or replace it with a new one.
After washing, the filter should be placed in a ventilated place, and then loaded back after it is confirmed to be dry.

After maintenance, be sure to install the filter screen. IF ANY ISSUE

Do not decompose, repair or transform the product by yourself.

TECHNICAL INFORMATION

Voltage	AC220 V-50 Hz
Rated power	650 W
Suction power	150W
Effective capacity of recycling bin	1.2L
Clean water tank capacity	1.41
Hose length	031.5mm)

1.7m
Hot water temperature| Not more than 40 degrees
Product Size (main engine size)| L37492498318
Product weight (including accessories)| 4.5kg
Power cord length| 3m

The warranty period for our products is 2 years, unless otherwise stated, starting from the date of initial purchase or the date of delivery.

If you have any problems or questions, you can easily access our help pages, troubleshooting tips, FAQ, and user manuals on our service site: https://sav.hkoenig.com.
By typing the reference name of your device in the search bar, you can access all available online support, designed to best meet your needs.
If you still cannot find an answer to your question or problem, then click on “Did the answer solve your problem?”. This will direct you to the Customer Support Request Form, which you can fill out to validate your request and get help.

WARRANTY CONDITIONS

The warranty covers all failures occurring under normal use, in accordance with the usage and specifications in the user’s manual.
This warranty does not apply to packaging or transportation problems during shipment of the product by the owner. It also does not include normal wear and tear of the product, nor maintenance or replacement of consumable parts.

EXCLUSION OF WARRANTY

Accessories and wearing parts (*).
Normal maintenance of the device.
All breakdowns resulting from improper use (shocks, failure to comply with power supply recommendations, poor conditions of use, etc.), insufficient maintenance or misuse of the device, as well as the use of unsuitable accessories.
Damage of external origin: fire, water damage, electrical surge, etc.
Any equipment that has been disassembled, even partially, by persons other than those authorized to do so (notably the user).
The products whose serial number would be missing, deteriorated or illegible that would not allow its identification.
The products subjected to leasing, demonstration, or exhibition.

(*) Some parts of your device, called wear parts or consumables, deteriorate with time and frequency of use of your device. This wear and tear are normal but can be accentuated by poor conditions of use or maintenance of your device. These parts are therefore not covered by the warranty.
The accessories supplied with the device are also excluded from the warranty. They cannot be exchanged or refunded. However, some accessories can be purchased directly through our website: https://sav.hkoenig.com/.

Environmental protection:

The battery may pollute the environment, you must remove the battery before discarding the appliance, or send the appliance to a designated recycling collection point.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of it’s life separately from your house hold waste. There are separate collection systems for recycling in the EU.For more information, please contact the local authority or your retailer where you purchased the product.
Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05

HKoenig Logo