Pulsar AWO528S Vertical Metal Container Installation Guide
- June 13, 2024
- Pulsar
Table of Contents
Pulsar AWO528S Vertical Metal Container
Product Information
- Product Name: Casings for recorders -universal
- Product Code: AWO528S v.1.0/I
- Enclosure Type: DVR/MINI/VERTICAL
- External Dimensions: W=319mm, H=429mm, D + D2=81+14mm (±2mm)
- External Dimensions of Front Panel: W1=319mm,H1=81mm
- Dimensions of Recorder Compartment: W2=319mm,D1=81mm, D=14mm
- Net/Gross Weight: Not specified
- Operating Conditions: Not specified
- Material: Not specified
- Destination: Not specified
- Tamper Switch Protection: Not specified
- Closing: Not specified
Product Usage Instructions
To install the AWO528S v.1.0/I Enclosure DVR/MINI/VERTICAL, follow the steps below:
- Prepare the installation site and ensure it meets the necessary requirements.
- Place the enclosure in the desired location.
- Open the enclosure by following the specified method of closing.
- Insert the recorder into the designated compartment of the enclosure with the dimensions W2=319mm, D1=81mm, D=14mm.
- Close the enclosure securely using the specified closing method.
- Make sure the tamper switch protection is activated if applicable.
Refer to the product manual for any additional notes, warranty information, or specific operating conditions.
Casings for recorders – universal
CODE: AWO528S v.1.0/I
NAME: Enclosure DVR/MINI/ VERTICAL
Installation example
DESTINATION
Enclosure protects recorder against unauthorized access or theft (two keys
included). Made of 1,2 mm steel plate. Set includes one key (different code),
two keys included and tamper switch unwanted enclosure opening.
Due to vertical installation and low depth, it is ideal for places where
deeper enclosures or cabinets type RACK 19” cannot be installed. After opening
enclosure, front cover is held in a horizontal position, providing easy access
to buttons on front panel of DVR.
Enclosure has a special holder with retaining straps that allows for
installation of recorders of following dimensions: width up to 260 mm, height:
up to 55 mm, depth up to 250 mm.
TECHNICAL DATA
- External dimensions of enclosure: W=319, H=429, D + D =81+14 [mm, +/-2] 2
- External dimensions of front panel: W =325, H =435 [mm, +/-2] 2 2
- Dimensions of recorder compartment: W =260, H =250, D =55 [mm, +/-2] 1 1 1
- Net/gross weight: 4,98 / 5,21 [kg]
- Operating conditions: Temperature: -10oC ÷ +40oC relative humidity 20%…90%, without condensation
- Material: sheet metal, thickness: 1.2mm, anticorrosion protection, color RAL 9005 (black matt)
- Destination: inside
- Tamper switch protection: 1 x microswitch: enclosure opening 0,5 A; 50 V DC max. NC – normally closed contacts
- Optionally: 1 x microswitch: detachment form wall, 0,5A; 50 V DC (required PKAZ067)
- Closing: lock MR008 (different code) x 1 pcs.
- Notes: distance from wall (mounting surface) – 14 mm
- set includes one key (different code), two keys included
- Warranty: 2 years from production date