ET2 Lighting E11394 Phoenix 18.5 LED Pendant User Guide
- June 13, 2024
- ET2 Lighting
Table of Contents
Item/Model Number: E11394
Phoenix 18.5″ LED Pendant
Lamping Ampoule: 1 x E26 12W LED (Included)
Please consult a qualified electrician prior to install
GENERAL120V INSTRUCTIONS
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach or small children.
Chooseaclean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lfting. Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb o cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, ie. glass
cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposureto heat sourcesmay cause glazing, meltingandscorching,
oreven cause color to fade.
PARTS
Before getting started,ensure the package contains the following components:
Made in China
Documents / Resources
| ET2
Lighting E11394 Phoenix 18.5 LED
Pendant
[pdf] User Guide
E11394 Phoenix 18.5 LED Pendant, E11394, Phoenix 18.5 LED Pendant, 18.5 LED
Pendant, LED Pendant
---|---