Singing Machine SML633 CDG Karaoke Machine Instruction Manual
- June 13, 2024
- Singing Machine
Table of Contents
- Singing Machine SML633 CDG Karaoke Machine
- Warnings
- Important Safety Information
- Included
- Location of Controls (Front)
- Location of Controls (Top/Rear)
- Connection
- Operation
- Where to Download MP3+G Files
- Troubleshooting Guide
- Specifications
- FREQUENTLY ASKED QUESTIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Singing Machine SML633 CDG Karaoke Machine
Warnings
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Caution marking is located on the rear panel.
- DANGEROUS VOLTAGE: The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product.
- VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use. THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE.
- Warnings:
- This CD player employs a laser light beam. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
- The use of controls, adjustments, or procedures other than those specified herein might result in hazardous radiation exposure.
- The apparatus shall be used in an open area.
- CAUTION! Invisible laser radiation when open and interlocks defeated. Avoid exposure to the beam.
- WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the rear of the unit.
Important Safety Information
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all Instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install in accordance with the Manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time .
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on the apparatus.
- The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket.
- CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire, or other heat sources.
Included
What’s in the box?
Location of Controls (Front)
- MIC 2 VOLUME control
- Auto Voice Control
- USB Port
- MASTER VOLUME Control
- LINE IN Jack
- BALANCE Control
- MIC 1 VOLUME control
- Power indicator
- ON/STANDBY Button
- FUNCTION Button
- REPEAT/PROGRAM Button
- VOICE EFFECTS Button
- Mic Holders
- LIGHTS Button
- SKIP 10+ Button
- Record Indicator
- RECORD Button
- PLAY/PAUSE Button
- STOP Button
- BLUETOOTH pairing Button
- SKIP FORWARD Button
- SKIP BACK Button
- Speaker
- CDG Indicator
- Play/Pause Indicator
- Repeat Indicator
- Program Indicator
Location of Controls (Top/Rear)
TOP VIEW and REARVIEW
- CD Door
- CD open
- DC IN Jack
- MIC 2 Jack
- MIC 1 Jack
- HDMI Jack
- LINE OUT Jack
Connection
Connecting the Microphone(s)
Microphones: Connect a microphone into Mic jack 1 as well as Mic jack 2 (when desired).
Note: Do not drop or tap the Mic as damage to the Mic or speakers may occur. Do not twirl the microphone cord as it will cause damage to the encased wiring.
Connecting the Unit to a TV
To output the video, lyrics, and audio to your TV, perform the following steps: Plug the HDMI cable (not included) into the HDMI Jack on the back of the unit. Plug the other end of the HDMI cable into the HDMI input on your TV.
Notes:
- This unit can be used with or without a TV, but it is highly recommended to use a TV in order to utilize all the features.
- Also, refer to the TV’s User Guide.
- To see the lyrics on the screen, you must use a CD+G disc.
Connecting to AC Power
Insert the AC power cord into a conveniently located AC outlet having 120V AC, 60Hz.
Note: Make all connections before connecting to AC power.
Connecting to LINE IN Jack
Connect an external device by using an appropriate cable (3.5mm audio cable not included) as shown.
Note: See page E19 to select and use the Line In function.
Connecting to Line Out Jack
This unit can be connected to another audio system for greater audio output via a 3.5mm AUX cord (not included). Plug one end of the AUX cord into the Line Out jack located on the back of the machine. Plug the other end of the AUX cord into the Line In jack on your separate audio device. You may need to refer to the instructions of your separate audio device for more details.
Lights Mode
Press the LIGHTS button to switch on the lighting effect, and press it again to switch off.
Bluetooth Mode
Press the button to easily set the achine to Bluetooth mode.
Note: See page E16 for Bluetooth operation instructions.
Operation
Playing a CDG
This unit is designed to play CDs and CDGs bearing the identification logo respectively. If the disc does not conform to the standard, it may not play properly.
Notes:
What is a CD+G?
A CD+G (CD+Graphics) is the standard format for most karaoke discs that
will display the words on the screen. Never place anything other than a CD in
the compartment, as foreign objects can damage the unit. If no disc is
inserted, “no” will appear on the display.
- Connect the unit as described previously; if using a CD+G, it is recommended to connect to a TV. Press the button to turn the unit on.
- Lift open the CD door and insert a CD or a CD+G by gently pressing it on the center spindle. Then close the CD door.
- Repeatedly press the FUNCTION button to select the CDG mode; “—” will appear when searching the disc and then the total number of tracks will appear.
- Press the button to start playback; if listening to a CD+G file, the image and lyrics will appear on the TV screen (if connected) and the PLAY/PAUSE and CDG Indicator will light.
Playing a CDG (Continued)
- Adjust the volume to a comfortable level using the MASTER VOLUME control.
- Connect the microphone(s) and slide the ON/OFF switch on the microphone to the ON position.
- Adjust the MIC 1 or MIC 2 VOLUME control as desired. Increasing this will increase the volume of the respective microphone.
- AUTO VOICE CONTROL can be activated by rotating the AVC control. The higher this control is set to, the more the vocals on the multiplex recording will be muted when the singer starts to sing through the microphone. When the singer stops singing, the recorded vocals on the multiplex recording will resume to normal.
- Rotate the BALANCE control clockwise to hear the music and recorded vocals from a multiplex recording or counterclockwise to hear the music only from a multiplex recording.
Note: To use the BALANCE control, a CD+G disc must be used, otherwise it will operate as a standard Balance control.
- SKIP: Advance or go back on track by pressing the /button.
- REPEAT: During playback, press the REPEAT/PROG button once to repeatedly play the selected song; the Repeat indicator will blink. Press the REPEAT/PROG button a second time to repeatedly play the whole CD; the Repeat indicator will light solid. Press it again to cancel the Repeat function, the Repeat indicator turns off.
- PROGRAM: You can program up to 20 tracks on any disc for playback in any desired order. While in the Stop mode, press the REPEAT/PROG button; the Program indicator will blink, and “P00” will appear. Select the first track using the buttons. Press the REPEAT/PROG button again to confirm the entry. After selecting the desired tracks the display will show P01, P02, etc. recognizing the tracks selected have been programmed. Repeat to set up to 20 tracks into memory. When done, press the button to start playback.
Note:
Press the button TWICE to stop and clear the program.
- PAUSE: During playback, if you wish to pause the disc momentarily, press the button; the PLAY/PAUSE indicator will blink. Press again to resume normal playback.
- Press the button to stop playback.
- VOICE EFFECTS: Repeatedly press the VOICE EFFECTS button to select from ECHO, FEMALE, MALE, CHIPMUNK, ROBOT or RADIO vocal effect. Select “EF0” to sing without any voice effects.
- RECORD YOUR SINGING: Insert a USB drive first, then press the button; the song will start over and the recording will begin. When done recording, press the button again to stop recording.
Notes:
- A USB drive (not included) must be inserted into the USB slot to record.
- The recorded audio file will be recorded onto the USB drive.
- See the section “Playing Songs from the USB” to play back your recorded files.
- Press the button to turn the unit off.
Playing Songs from the USB
-
Connect the unit as described previously. Press the button to turn the unit on.
-
Insert a USB flash drive into the USB port on the unit so it faces upward. Make sure to download music from the Karaoke store.
-
Repeatedly press the FUNCTION button to select the USB mode; “USb” will appear when searching the drive and then the total number of files will appear.
Note: The USB mode cannot be accessed until a flash drive is inserted. -
Press the button to start playback; if listening to an MP3+G file, the image and lyrics will appear on the TV screen (if connected).
-
Adjust the volume to a comfortable level using the MASTER VOLUME control.
Note: If connected to a TV or other audio source, adjust the volume of the TV using its own volume control. -
Connect the microphone(s) and slide the ON/OFF switch on the microphone to the ON position.
-
Adjust the MIC 1 or MIC 2 VOLUME control as desired. Increasing this will increase the volume of the respective microphone.
-
AUTO VOICE CONTROL can be activated by rotating the AVC control. The higher this control is set to, the more the vocals on the multiplex recording will be muted when the singer starts to sing through the microphone. When the singer stops singing, the recorded vocals on the multiplex recording will resume to normal.
-
Rotate the BALANCE control clockwise to hear the music and recorded vocals from a multiplex recording or counterclockwise to hear the music only from a multiplex recording.
-
SKIP: Advance or go back on track by pressing the / button. You can also skip ahead 10 files/ tracks using the SKIP 10+ button. ****
-
REPEAT: During playback, press the REPEAT/PROG button once during playback, the Repeat indicator will blink and the current track will be repeated. Press the REPEAT/PROG button twice, the Repeat indicator will flash quickly, and all MP3 tracks inside the current folder will be repeated continuously. Press the REPEAT/PROG button three times, the Repeat indicator will light solid, and all MP3 tracks will be repeated. To stop the repeat function by pressing the button again, the Repeat indicator will turn off.
-
PROGRAM: You can program up to 20 tracks for playback in any desired order. While in Stop mode, press the REPEAT/PROG button; the Program indicator will blink, and “P00” appear. Select the first track using or buttons, then press the REPEAT/PROG button. Repeat to set up to 20 tracks into memory. When done, press the button to start playback. Note: Press the button TWICE to stop and clear the program.
-
PAUSE: During playback, if you wish to pause the music momentarily, press the button. Press again to resume normal playback.
-
Press the button to stop playback.
-
VOICE EFFECTS: Repeatedly press the VOICE EFFECTS button to select from ECHO, FEMALE, MALE, CHIPMUNK, ROBOT or RADIO vocal effect. Select “EF0” to sing without any voice effects.
-
Press the button to turn the unit off.
Using a Bluetooth Device
-
Connect the unit as described previously. Press the button to turn the unit on.
-
Press the button or repeatedly press the FUNCTION button to select the Bluetooth mode; “bt” will appear in the display and flash. The unit automatically searches for and pairs a previously paired Bluetooth device (if previously paired). If no previously paired devices are present you cannot find this unit on your Bluetooth-compatible device’s search list. Press and hold the button; the display will flash alternatively “bt” & “pr” in 60 seconds.
Note: You can also press and hold the button to disconnect any paired devices in order to pair another device. -
Turn on your device’s Bluetooth option in settings to search for a discoverable device with a Bluetooth signal. Select “Singing Machine” from the device results on the Bluetooth menu.
Note: Also refer to the user manual of your Bluetooth device for detailed instructions. -
“bt” will light solid in the display and a successful pairing sound will be heard.
Notes:
-
If your Bluetooth prompts you for a passcode during the pairing process, please enter “0000” to connect.
-
On some Bluetooth devices, once pairing is complete, select your Bluetooth device as “Use as Audio Device” or similar.
-
If the connection is lost after successful pairing, check to make sure the distance between the speaker and Bluetooth-enabled device does not exceed 30 feet/10 meters.
-
“Bluetooth” will blink on the TV screen, and will stop blinking after a successful connection.
-
To control your Bluetooth device from this unit, press the button to start playback. Press the button during playback to pause the song.
-
Adjust the volume to a comfortable level using the MASTER VOLUME control on this unit as well as the volume on your Bluetooth device.
-
Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position.
-
Adjust the MIC 1 or MIC 2 VOLUME control as desired. Increasing this will increase the volume of respective microphone.
-
Adjust the balance between the speakers using the BALANCE control.
-
Advance or go back one track by pressing the / button.
-
VOICE EFFECTS: Repeatedly press the VOICE EFFECTS button to select from ECHO, FEMALE, MALE, CHIPMUNK, ROBOT or RADIO vocal effect. Select “EF0” to sing without any voice effects.
-
RECORD YOUR VOCAL PERFORMANCE: To record your singing as well as the music, press the button. The recording will begin and the record indicator will light solid. When done recording, press the button again; the record indicator will turn off.
Notes:- A USB drive (not included) must be inserted into the USB slot to record.
- The recorded audio file will be recorded onto the USB drive.
- See the section “Playing Songs from the USB” to play back your recorded files.
-
Press the button to turn the unit off.
Using the LINE IN Jack
- Connect the unit as described previously. Press the button to turn the unit on.
- Connect the external unit to the LINE IN Jack on the front of this unit. Connecting an external unit will allow the audio to be played through your Singing Machine. Repeatedly press the FUNCTION button to select the Line In mode; “AU” will appear in display. ** Notes:**
- It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion.
- Skipping files/tracks is not possible on this unit when using an external device.
- Adjust the volume using the MASTER VOLUME control on this unit or your external device’s volume control.
- Connect the microphone(s) and slide the ON/OFF switch on the microphone to the ON position.
- Adjust the MIC 1 or MIC 2 VOLUME control as desired. Increasing this will increase the volume of the respective microphone.
- Adjust the balance between the speakers using the BALANCE control.
- VOICE EFFECTS: Repeatedly press the VOICE EFFECTS button to select from ECHO , FEMALE , MALE , CHIPMUNK , ROBOT or RADIO vocal effect. Select “EF0” to sing without any voice effects.
- RECORD YOUR VOCAL PERFORMANCE: To record your singing as well as the music, press the button. The recording will begin and the record indicator will light solid. When done recording, press the button again; the record indicator will turn off. Notes:
- A USB drive (not included) must be inserted into USB slot to record.
- The recorded audio file will record onto the USB drive.
- See section “Playing Songs from the USB” to play back your recorded files.
- Press the button to turn the unit off.
Where to Download MP3+G Files
Helpful Hints:
The .mp3 and .cdg files are delivered for download in a single, compressed MP3+G.zip file. The MP3+G file cannot be played as a .zip file on a USB flash drive. To play karaoke songs using a USB flash drive, the MP3+G.zip file must be unzipped as follow:
- Connect a USB flash drive to your computer.
- Download the MP3+G file from your Digital Locker and save the .zip file to a folder on your computer.
- Double-click the .zip file to open the .zip (you will see the .mp3 .cdg files on the USB flash drive.
- Remove (eject) the USB flash drive from your computer.
Turn on the Singing Machine and connect the USB flash drive.
FAQ
Where can I get additional help with the file formats?
While on the Singing Machine Store’s web page, simply click FILE FORMATS at
the lower left.
To purchase and download karaoke music, please visit http://store.singingmachine.com to access over 15,000+ of your favorite karaoke songs. You will need a USB flash drive (not included) to transfer the downloads to this unit. Follow these easy steps:
- Go to http://store.singmachine.com using your internet browser, and then register.
- Select and purchase your favorite karaoke music from the Singing Machine Download Store.
- Download your selected purchase(s) from the Singing Machine Digital Locker to your USB flash drive.
- Insert the USB flash drive as shown on page E12 and have fun singing!
Note: Your downloaded songs can also be burned to a blank CDR/CDRW.
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
- The power is not on; press the button to turn the power on.
- Confirm that the AC adapter is connected securely to the back of the unit.
- Connect the unit to a different outlet.
- The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply restart the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.
No Sound – General
- Master Volume is set to minimum; raise volume.
- Correct Function was not selected; select using the FUNCTION button.
- If using an external device, raise the volume.
No Sound – If connected to a TV
- Volume on the TV is muted or too low.
- Correct source (usually AV) was not selected on the TV’s menu.
Lyrics do not appear on the TV screen
- If connected to a TV, Video plug is not connected properly; see page E5.
- If connected to a TV, select the correct source on the TV (usually AV).
- The file/track being played is not a track recording with lyrics. These are the only files that allow you to view the lyrics on the TV screen.
- Nothing will appear on the TV screen when using Line In or Bluetooth.
File(s) on USB jack not playing
- The file is corrupted; replace the file.
- The file is not in a format this unit will play.
- The connected USB device is not supported by the product.
No sound from the microphone
- Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
- Make sure the ON/OFF switch on the microphone is set to the ON position.
- Make sure the MIC 1 & MIC 2 VOLUME setting is not set too low.
- MASTER VOLUME is set to minimum; raise volume.
The Bluetooth device cannot be paired or connected with the unit
- You have not activated the Bluetooth function of your device; see page E16 or refer to the Bluetooth device user’s manual.
- The system is not in pairing mode; press and hold the button to restart pairing.
The Music is not available on the unit after successfully connecting the Bluetooth
- Ensure your Bluetooth device can support the A2DP Bluetooth profile.
- The volume on the external Bluetooth device is set to low or muted; raise as desired.
Specifications
AUDIO
- OUTPUT POWER (MAXIMUM) …………………………………………………………………….. 3.5 Watts (RMS)
- OUTPUT IMPEDANCE ……………………………………………………………………………………………………3 Ohms
CD PLAYER SECTION
- FREQUENCY RESPONSE …………………………………………………………………………………. 100Hz – 20kHz
- SIGNAL-TO-NOISE RATIO ……………………………………………………………………………………………….. 50dB
BLUETOOTH
- Bluetooth Version ……………………………………………………………………………………………………………….V5.0
- Working Distance ……………………………………Up to 30 feet/10 meters measured in open space
USB
- Format ………………………………………………………………………………………………………………………………FAT32
- Maximum Compatibility ……………………………………………………………………………………………………32GB
- AUX IN SECTION ……………………………………………………………….. 3.5 mm Stereo Headphone Jack
- MICROPHONE …………….. -74db 600 Ohm Impedance with 6.3 mm Dynamic Microphone
- POWER SECTION …………………………………………………………………………………………….. DC 5.8V 1.5A
- POWER CONSUMPTION ……………………………………………………………………………………………… 8.7 W
- DIMENSIONS (HxWxD) ……………………. 12.8 x 10.5 x 8.1 inches / 32.7 x 26.6 x 20.6 cm
- WEIGHT …………………………………………………………………………………………………………. 4.6 lbs / 2.1 kgs
Specifications are subject to change without notice.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks and logos by The Singing Machine Company, Inc. is under license. Other trademarks and trade names are those of their respective owners.
FREQUENTLY ASKED QUESTIONS
What is the Singing Machine SML633 CDG Karaoke Machine?
The Singing Machine SML633 is a CDG Karaoke Machine designed for fun and interactive singing experiences, featuring a built-in CD player and disco lights.
What media does this karaoke machine support?
The SML633 supports CD+G discs, which contain both audio tracks and graphics for on-screen lyrics, enhancing the karaoke experience.
Does it come with a microphone?
Yes, the Singing Machine SML633 typically includes one wired microphone, allowing you to start singing right away.
How many microphones can be connected to this karaoke machine?
The SML633 often supports two microphone inputs, enabling duets or group performances with friends and family.
Is there a screen to display lyrics?
Yes, the karaoke machine features an integrated 5.5-inch black and white monitor to display song lyrics while singing.
Can I connect it to a TV for a larger display?
Yes, the SML633 includes video output options that allow you to connect it to a TV or monitor for a bigger lyrics display.
Does it have built-in speakers?
Yes, the karaoke machine has built-in speakers, providing audio playback without the need for external speakers.
What types of audio inputs and outputs are available?
The SML633 typically includes audio inputs for CD+G discs and an auxiliary input. It also offers audio output options for connecting to external devices.
Is there a built-in light show or disco lights feature?
Yes, this karaoke machine often includes built-in disco lights that synchronize with the music, creating a vibrant and party-like atmosphere.
Is the Singing Machine SML633 suitable for children?
Yes, the SML633 is designed to be user-friendly and suitable for kids, making it a great choice for family karaoke fun.
What comes in the package with the Singing Machine SML633?
The package typically includes the karaoke machine, one wired microphone, RCA cables, a demo CD+G disc, and user manuals for easy setup.
Can I adjust the key or pitch of the songs?
Yes, the SML633 often includes key control functionality, allowing you to adjust the pitch of the songs to match your vocal range.
Is there a warranty included with the Singing Machine SML633?
Yes, the Singing Machine SML633 CDG Karaoke Machine typically comes with a manufacturer's warranty to provide peace of mind and support for your purchase.
DOWNLOAD THE PDF LINK:Singing Machine SML633 CDG Karaoke Machine Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>