PHOENIX GOLD ZX65CX 2 Way Coaxial Speaker Instruction Manual

PHOENIX GOLD ZX65CX 2 Way Coaxial Speaker

Product Information

The ZX65CX is a 6.5/165mm 2-Way Coaxial Speaker model from Phoenix Gold. It features a midbass speaker size of 6.5 inches (165mm) and a tweeter size of 1 inch (25mm). The speaker has an impedance of unspecified value, a frequency response range that is not specified, and a power handling capacity of 80W RMS (Root Mean Square) and 160W MAX (Maximum). The sensitivity of the speaker is rated at 89dB (1W/1m), indicating its sound output level. The voice coil diameter is 1 inch (25mm), and the speaker comes with a high-pass filter for the tweeter set at 4300Hz (12dB/Oct). The outer diameter of the speaker is 165mm, the mounting diameter is 145mm, and the mounting depth is 64mm. The package includes speaker grills for protection.

Product Usage Instructions

Installation:

• Ensure that the speaker is firmly fixed in your vehicle.
• Check before drilling or cutting holes to avoid any damage to fuel tanks, fuel lines, hydraulic lines, or electrical wiring.
• Correctly install the tweeter filter to prevent any damage to the tweeter. Ensure it is securely attached.
• Make sure that the speaker and cables are securely attached and installed in a way that prevents pinching or damage to the cables.
• Phoenix Gold disclaims responsibility for any damage or injury resulting from inappropriate installation of this product.

Make sure the speaker is firmly fixed in your vehicle. Check before drilling or cutting holes. DO NOT work near fuel tanks, fuel lines hydraulic lines or electrical wiring. Make sure that the tweeter filter is correctly installed to the speaker to ensure that the tweeter is not damaged. Always ensure that the speaker and cables are securely attached and installed in such a way that no cables can be pinched or damaged. Phoenix Gold accepts no responsibility for damage or injury in relation to inappropriate installation of this product.

Filter Usage:

• Install the high-pass filter to ensure perfect audio balance and prevent damage to the tweeter.
• In case of active installation, adjust the high-pass tweeter filter before listening to the speaker for optimal sound quality.

Warranty:
Phoenix Gold products come with a limited warranty. For more information on warranty coverage and terms and conditions, please contact your local retailer or distributor.

Note: All specifications are subject to change without notice. Phoenix Gold follows environmental standards to minimize negative impacts.
Revision Date: 02/03/2023

SPECIFICATIONS

Includes high-pass filter 160W PEAK 80W RMS

• Sensitivity 89dB (1W/1m)
• 1” (25mm) Soft dome tweeter
• 1” (25mm) Voice coil
• Polypropylene cone with rubber surround
• 4300Hz High-pass filter (12dB/Oct) for the tweeter
• Mounting diameter: 145mm
• Mounting depth: 64mm
• Speaker grills included

Disclaimer

Ensure your safety and the well-being of those around you by following these essential guidelines:

• Keep all product materials and packaging away from children, pets, or anyone at risk of suffocation.
• Exposure to noise levels above 85 dB can cause permanent hearing damage.
• Extreme sound frequencies reduce perception abilities that are essential in road traffic conditions; do not let loud volumes distract from being mindful behind the wheel.
• Phoenix Gold takes no responsibility for any physical harm or damage caused by improper use of their products.
• Ensure that all metals and raw materials are disposed of in accordance with local regulations and environmental standards to minimize any negative impact on the environment.

© 2023 Phoenix Gold | A Brand of AAMP Global phoenixgold-eu.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>