Goldair GCPF165 Pedestal Fan with Timer and Remote Instruction Manual

: June 13, 2024
: GOLDAIR

Table of Contents

Goldair GCPF165 Pedestal Fan with Timer and Remote
Product General Care and Safety Guide
Product Usage Instructions
General Care and Safety Guide
Specification
Components
Assembly
Operating your Fan
Cleaning
One Year Warranty
Contacts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Goldair GCPF165 Pedestal Fan with Timer and Remote

Product General Care and Safety Guide

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Ensure that the fan is switched off from the supply mainsbefore removing the guard.
Use only the voltage specified on the rating plate of the appliance.
Keep all objects at least 1 Metre from the front, sides and rear of the appliance.
This appliance is intended for household use only and not for commercial or industrial use.
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
The common cause of overheating is deposits of dust or fluff in the appliance.
Never place appliance close to radiant heat source.
Never operate in areas where petrol, paint or other flammable liquids are used or stored.
Never use the appliance to dry clothes.
Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
Never use abrasive cleaning products on this appliance. Clean with a damp cloth.

Product Usage Instructions

Operating your Fan

Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use.
This appliance requires no installation, it should be used solely as a portable appliance.

WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.

Place the fan on a dry, level and sturdy surface.
Check that the fan control switch is set to the off position before plugging into the mains supply.
To operate the fan from the control panel, press the ON/SPEED button and the fan will step through the speeds from Low to High and the appropriate LED will glow. The OFF button turns the fan off.

General Care and Safety Guide

Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Ensure that the fan is switched off from the supply mains before removing the guard.
Use only the voltage specified on the rating plate of the appliance.
Keep all objects at least 1 Metre from the front, sides and rear of the appliance
This appliance is intended for household use only and not for commercial or industrial use.
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
Always unplug appliance when not in use.
When the appliance has been unpacked, check it for transport damage and ensureall parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
Ensure hands are dry before handling the plug or the main unit.
Carry out regular checks of the supply cord to ensure no damage is evident.
Ensure that the cord is fully extended (not coiled) while in use.
Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
Switch off and use handles provided when moving.
It is recommended that this fan is plugged directly into the wall socket.
A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
Never place appliance close to radiant heat source.
Never operate in areas where petrol, paint or other flammable liquids are used or stored.
Never use the appliance to dry clothes.
Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
Never connect the appliance to mains supply until completely assembled and adjusted.
Never remove plug from power socket until the appliance has been switched off.
Never remove plug from power socket by pulling cord – always grip plug.
Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
Never use this appliance outdoors.
Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.

Specification

Model No: PF0510
Item no: (GCPF165)
Supply: 220-240VAC 50-60Hz
Wattage: 45W
Approval No: GMA-510521-EA
QC Passed: PO#-WWYY
MADE IN CHINA

CUSTOMER SUPPORT

NEW ZEALAND/ PH: 0800 232 633
AUSTRALIA/ PH: 1300 465 324

Components

Goldair-GCPF165-Pedestal-Fan-with-Timer-and-Remote-
fig-1

Front Guard
Blade Cap
Blade
Guard Mounting Nut
Rear Grill
Motor Shaft
Oscillating Pin
Motor Housing
Neck Screw
Control Panel
Head Securing Screw
Height Adjustment Knob
Inner Tube
Outer Tube
Base Decorative Cap
Base
Base Weight
Base Washer
Base Bolt
Grill Nut & Bolt

Assembly

Pedestal Base

Remove the height adjustment knob from the pedestal outer tube
Slide the base cover over the pedestal outer tube and replace the height adjustment knob
Place the outer tube onto the base and the base weight under the base add washer then tighten with the screw provided

Mounting Fan onto Pedestal Base

If necessary, slightly loosen the head securing screw by turning it anticlockwise
Slide the switch box down over the inner tube and tighten the securing screw
Make sure the securing screw is done up tightly

Blade and Grill

Unscrew the guard mounting nut from the front of the motor housing by rotating it anticlockwise
Position the rear grill against the front of the motor housing with the handle at the top, ensure that the locating pegs on the motor housing are engaged correctly in the holes of the rear grill
Tighten the guard mounting nut clockwise do not to over tighten
Push the fan blade onto the motor shaft, locating the slot at the back of the blade on the drive pin that passes through the motor shaft
Tighten the blade cap by turning it anticlockwise
Position the front grill against the rear grill so that the holes in the rims that accept the small nut and bolt are in line
Insert the bolt through the holes and screw on the nut Do not fully tighten at the stage
Push the grill retaining clips into position ensuring that they engage correctly on the rim of the grill
Fully tighten the small nut and bolt that passes through the rim of the grill

Operating your Fan

Always choose a safe location for the fan, keeping in mind the safety precautions outlined Ensure all packaging has been removed from the unit before use This appliance requires no installation, it should be used solely as a portable appliance

WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.

Place the fan on a dry, level and sturdy surface. Check that the fan control switch is set to the off position before plugging into the mains supply. To operate the fan from the control panel, press ON/SPEED button and the fan will step the fan through the speeds from Low to High and the appropriate LED will glow. The OFF button turns the fan off. Adjust tilt by turning neck screw and tilting fan head to the desired wind direction either Upwards or downwards. Press the oscillation pin on the back of the motor to turn the oscillation on. Pull it back up to turn the oscillation off.

REMOTE CONTROL

The remote control performs the same functions as above and also controls the MODE and TIMER functions as described below. Press the TIMER button to set the timer The set time will increase 0 5 hours every time the button is pressed the maximum time is 7 5 hours (the indication LED will show the set time) To cancel the timer, press the timer button until no timer LED’s are illuminated When first switched on the “MODE” LED will glow red indicating that the unit is operating in “Normal” mode. Press the MODE button and the light will change to green which is a “Natural” setting where the fan will operate at various speeds to simulate natural wind. Pressing the MODE button again will change to “Sleep” mode.

If Sleep mode is selected with the fan on high speed: The fan will operate at high speed in Nature mode for 30 minutes, then at medium speed in Nature mode for 30 minutes, and then it will operate at low speed in Nature mode until manually turned off.
If Sleep mode is selected with the fan on Medium speed: The fan will operate at medium speed in Nature mode 30 minutes, and then it will operate at low speed in Nature mode until manually turned off.
If Sleep mode is selected with the fan on Low speed: The fan will operate at low speed in Nature mode until manually turned off

Pressing the MODE button again will change back to “Normal” mode.

To replace the batteries in the remote control, use a screwdriver to unscrew and lift the battery cover. Replace all batteries with 2 x AAA type batteries. Ensure you insert new batteries with the polarities in the correct direction. Replace the battery cover and tighten the screw. Remove batteries when unit is not being used for prolonged periods. Do not dispose of batteries in fire as batteries may leak or explode. Do not recharge non rechargeable batteries.

IMPORTANT: NEVER COVER THIS APPLIANCE!

Cleaning

The fan requires regular cleaning to ensure trouble free operation
Ensure that the fan is switched off from the supply mains before removing the guard
Unplug the fan from the mains supply before cleaning
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt
Use a vacuum cleaner to remove dust and fluff from around the grills
Ensure the fan is dry before plugging back into the mains supply
Do not attempt to dismantle the fan There are no user serviceable parts For service or repair, contact an authorised electrical service technician

Proof of purchase

To receive warranty retain receipt as proof of purchase ..(Refer to back of booklet)

One Year Warranty

Thank you for purchasing this Goldair product Your product is warranted against faults and manufacture when used in normal domestic use for a period of one year In non domestic use Goldair limits the voluntary warranty to three months Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.

PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.

The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act 1993

Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty