RODE Reporter Omnidirectional Dynamic Microphone Instruction Manual

: June 13, 2024
: Rode

Table of Contents

RODE Reporter Omnidirectional Dynamic Microphone
Product Information
Introduction
Speciﬁcations
Features
What’s in the Box
Optional Accessories
Care Instructions
Warranty / Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RODE Reporter Omnidirectional Dynamic Microphone

Product Information

The Reporter is a dynamic microphone designed for professional use. It features an omni-directional polar pattern, meaning it can pick up sound from all directions. The microphone has a frequency range of 70Hz to 15,000Hz, allowing for accurate reproduction of audio. It has an output impedance and sensitivity suitable for professional audio equipment, with an XLR output connection. The weight of the microphone is 256g without the microphone flag and 286g with the microphone flag attached. The dimensions of the microphone are 41.5mm x 272.5mm x 41.5mm.

The Reporter is equipped with a mesh head with an internal plosive screen to minimize handling noise and wind noise. It can withstand frequent connections and is designed to be discreet.

Introduction

Thank you for investing in the Reporter.
The RØDE Reporter is the result of over 30 years of dedicated research and experience in microphone design and manufacture across many ﬁ elds, from music, to broadcast and location sound.
The RØDE Reporter has been speciﬁ cally designed to deliver a full and rich sound quality when used in the reporting and news gathering ﬁ eld. With its high wind noise rejection and tailored frequency response, the Reporter delivers clear, broadcast quality sound.
Please take the time to visit www.rodemic.com and register your microphone for a full ten year warranty.
While there, you can download supporting documents, view studio tips and techniques, as well as browse a comprehensive range of accessories for the Reporter and other microphones.

Speciﬁcations

Acoustic Principle: Dynamic
Polar Pattern : Omni-directional
Frequency Range: 70Hz ~ 15 000Hz
Output Impedance: 150 ± 30% at 1kHz
Sensitivity: -56 dB re 1V/Pa (1.0mV @ 94 dB SPL) ± 3 dB @ 1 kHz
Output Connection: XLR
Weight: 256g (without mic fl ag) 286g (with mic fl ag)
Packed Weight: 1100g
Dimensions: 41.5mm x 272.5mm x 41.5mm (1.6” x 10.7” x 1.6”)

FREQUENCY RESPONSE

POLAR RESPONSE

Features

LOW HANDLING NOISE

Internal shock mounted capsule reduces unwanted handling noise
High wind noise rejection
Custom internal plosives screen to reject vocal plosives and unwanted wind noise

OMNIDIRECTIONAL DYNAMIC MICROPHONE CAPSULE

Frequency response optimised for speech intelligibility
Enables the use of ﬁ eld recorders without the ability to supply phantom power
Omnidirectional pickup pattern ensures smooth, even pickup from any direction

EXTRA LONG HANDLE

Well balanced, for comfortable handling over long periods
Allows for mounting of traditional microphone ﬂ ags
Ensures that you get closer to the source

DIE CAST ALUMINIUM BODY

Durable body will withstand the tough conditions encountered in the ﬁ eld and during transport
Light weight for easy handling
Robust connector, to keep a ﬁ rm hold on XLR cables and withstand frequent connections

MICROPHONE FLAG

Highly durable Polycarbonate / ABS plastic
Blank, two-sided for easy screen printing

MATTE FINISH

Ideal for video or TV production, when the microphone must be discreet

What’s in the Box

RØDE Reporter microphone
ZP2 zip pouch (located underneath cardboard insert)
Microphone ﬂ ag

Reporter Structure

RODE-Reporter-Omnidirectional-Dynamic-Microphone-fig-3

Mesh head with internal plosive screen
Extra long handle
XLR connector
Microphone ﬂ ag

Using the Reporter

The Reporter is a handheld dynamic microphone, designed for use in the ﬁ eld of news gathering and reporting.
The Reporter features an omnidirectional capsule. For this reason it is not always necessary to move the microphone back and forth between the interviewer and the person being interviewed.
In a typical interview scenario the microphone should be held at around chest height between the interviewer and the person being interviewed, to ensure that
the microphone picks up the speakers in the immediate vicinity clearly, while reducing the level of any background noise.

Microphone Flag

A custom microphone ﬂ ag is supplied with the Reporter. The microphone ﬂ ag has been designed so that it can be easily screen printed with your organisation’s logo, or a weatherproof adhesive label can be applied using the speciﬁ cations listed below.

Using the Microphone Flag

To install your microphone ﬂ ag, place the mesh head of the Reporter through the ring on the ﬂ ag, with the RØDE logo centred. Push the ﬂ ag down until it ‘clicks’ in place into the groove on the microphone head. Ensure it is properly secured by giving the ﬂ ag a few light agitations with your hand.
To remove your ﬂ ag, gently press the edges of the protruding ‘tabs’ on the ﬂ ag to give the ring some leeway. Pull ﬂ ag upwards to remove from the Reporter.

Optional Accessories

RM5 MICROPHONE CLIP

The RM5 stand mount is available to securely mount the Reporter on a microphone stand or boompole, allowing you to place the microphone in the optimal position for hands free recording, or giving the user the additional reach required to get closer to the sound source.

Care Instructions

When not in use, always keep your microphone in a cool, dry place, preferably in the supplied zip case, to protect from dust or damage. Do not expose the Reporter to rain or moisture.
In instances where the microphone has become exposed to the elements and the mesh head (wind cover) has become wet or dirty, it may be necessary to remove the head gently and dry it separately to the microphone body to prevent moisture from damaging the microphone capsule. Take care in this operation so as not to damage the microphone during removal.
Inside the Reporter box, you will ﬁ nd a sachet of moisture absorbent crystals. Please retain these crystals and store with the microphone to keep the microphone in ideal condition. Eventually this pack of crystals will need to
be dried. This is indicated by the crystals turning pink in colour. They can easily be re-used by placing them in an oven at 100-150 degrees Celsius for approximately ten minutes. The crystals will operate effectively again once they have turned blue.
The Reporter has no internal user serviceable parts. Should you encounter a problem, please refer all servicing to qualiﬁ ed service personnel.

Warning

Loud sound levels can cause serious hearing damage.
Take care when setting the audio levels, especially while wearing headphones.

Warranty / Support

RØDE Microphones prides itself on designing and manufacturing microphones of the highest quality and performance. Our state-of-the-art engineering and manufacturing techniques, combined with decades of experience in professional audio and recording has resulted in microphones that will last a lifetime.

All RØDE microphones are guaranteed for one year from the date of purchase. The Reporter warranty may be extended to a full ten year period. Extending your warranty is completely free of charge – simply register your purchase details on the RØDE website at www.rodemic.com/warranty

The warranty covers parts and labour that may be required to repair the microphone during the warranty period. The warranty excludes defects caused by normal wear and
tear, modiﬁ cation, shipping damage, or failure to use the microphone as per the instruction guide.
The RØDE Microphones 10 Year Warranty gives you the peace of mind that your investment is protected for many years to come.
If you experience any problem, or have any questions regarding your microphone, ﬁ rst contact the dealer who sold it to you. If the microphone requires a factory authorised service, return will be organised by that dealer. We have an extensive distributor/dealer network, but if you have difﬁ culty getting the advice or assistance you require, do not hesitate to contact us directly.

Technical Support: For information and technical support questions please visit www.rodemic.com/support
subject to terms & conditions see rodemic.com/warranty for full details