PHOENIX GOLD ZDSKFO1 Fiat Ducato Speaker Kit Installation Guide
- June 13, 2024
- PHOENIX GOLD
Table of Contents
PHOENIX GOLD ZDSKFO1 Fiat Ducato Speaker Kit Installation Guide
Installation Tools Required
**Vehicle used for installation:***
Fiat Ducato 2014 – 2021 (X290) Basic Sound System
*Some differences may occur between different car and year models.
-
PH2 Screwdriver
-
T15 Screwdriver
-
Plastic Pry Tool
-
PZ2 Screwdriver
-
ZDSKFO1 Installation 1
Tools required
1x Plastic Pry Tool
-
Front door speaker installation
-
Pull out the speaker grill
-
Remove the speaker grill
-
OEM Speaker
-
Disconnect the speaker connector
-
Unscrew the OEM speaker
-
Connect the speaker connector
-
Screw the speaker adapter in place
-
Connect the speaker harness
-
Screw the speaker in place
-
Speaker screwed in place
-
Refit the speaker grill
-
Remove the a-pillars
-
Unscrew the roof panel (step 15)
-
Unscrew all five roof panel screws
-
Loosen part of the rubber strip
-
Pull the a-pillar outwards
-
Do the same on the other side
-
Unscrew the top screw
-
Do the same on the other side
-
The top metal bar is now loose
-
Pull out the top metal bar
-
Pull out the pane
-
Unscrew the screw
-
Do the same on the other side
-
Pull out the lower metal bar
-
Disconnect the tweeter connector
-
Unscrew the two screws
-
Bring out the tweeter to the a-pillar
-
Press the tweeter into place
-
Reassemble a-pillars in reverse
-
Installation is now complete
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new upgraded system will
bring you joy and happiness for many years to come when listening to your
favorite music. As always, our goal is bringing you The Gold Standard in
Sound.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>