CMA DISHMACHINES CMA-180 VL Ventless High Temp Upright Dishwasher Instruction Manual
- June 13, 2024
- CMA Dishmachines
Table of Contents
CMA-180 VL Ventless High Temp Upright Dishwasher
Product Information
Model: CMA-180 VL/180 VLTall
Parts Manual Revision: 2.04
Manufacturer: CMA Dishmachines
Address: 12700 Knott Avenue, Garden Grove, California 92841
Contact: 800-854-6417
Fax: 714-895-2141
Website: www.cmadishmachines.com
Table of Contents
- 1. Parts Manual
- 1.1. Initial Parts Kit #1100.16
- 1.2. Exploded View Drawings
- 1.2.1. Straight Frame System Assembly
- 1.2.2. Heat Recovery System
- 1.2.3. Drain System Assembly (Ventless Unit)
- 1.2.4. 1.2.5. 1.2.6. 1.2.7. 1.2.8. 1.2.9. 1.2.10. 1.2.11.
1.2.12. 1.2.13. 1.2.14. 1.2.15. 1.2.16. 1.2.17.
Product Usage Instructions
Initial Parts Kit #1100.16
This kit includes the following parts:
- CMA-180 Drain Stopper
- Pump Assy. 115/220V 60Hz (Open)
- Pump Seal Kit
- Rinse Arm w/ Bearings
- Spray Arm Assy w/bearing & end plugs
- Spray Base Pull Lock Pin
- Contactor 208/240V 20 Amp
- CMA-180VL Timer Assy
- Micro Switch
- Illuminated Plug CMA-180/44 P
- Rocker Switch Auto Fill
- Power Switch Red 250V
- Toggle Switch DPDT 15 Amp/Delimer
- Roller Door Switch
- Door Spring
- Ice Cube Relay 220V 12 Amp
- 3/4 Water Solenoid Repair Kit JE
- 1/2 Water Solenoid Repair Kit JE
- 3/4 Vac Breaker Rep Kit Watts
- Solenoid Coil JE 220V (3/4 & 1/2)
- Wash Thermometer (Rinse PN3202.18)
- Counter – Face Mount 220V/50Hz
- Toggle Switch (Momentary) Screw Term
- Contactor 60 Amp 3 Pole
- Contactor 30 Amp
- SS Final Rinse Spray Jet SS
- Heater Thermostat
- Immersion Heater 240V/12kW T-Flange
- Liquid Level Switch-Long-D Flat
- Pressure Gauge(PN13605.45 MFG after Jan 2020)
- Immersion Heater 6kW208-240V T-Flange
- Hi Limit Switch 250 Deg
Exploded View Drawings – Straight Frame System Assembly
The straight frame system assembly consists of the following
parts:
| Item No. | No. Req’d | P/N | Description |
|---|---|---|---|
| 1 | 1 | 17532.18 | Frame Stand Left |
| 2 | 1 | 17506.37 | Door Ventless Right |
| 3 | 1 | 17506.38 | E Z Door Glide |
| 4 | 6 | 00636.17 | Door Guide |
| 5 | 6 | 17554.00 | Door Stop |
| 6 | 2 | 17552.00 | Corner Tray Track Rail |
| 7 | 1 | 01505.16 | Tray Track (EST/EC/ 180) |
| 8 | 1 | 01505.10 | Door Service Splash Guard |
| 9 | 1 | 17506.65 | Strainer Basket |
| 10 | 2 | 17510.00 | Scrap Body SS Scrap Trap Drawer |
| 11 | 1 | 01579.10 | Scrap Trap Holder Overflow |
| 12 | 1 | 01579.20 | Gasket 3-Dr Bracket outside Style |
MODELS CMA-180 VL/180 VLTall
PARTS MANUAL
Rev 2.04 05-31-23
CMA DISHMACHINES 12700 KNOTT AVENUE
GARDEN GROVE, CALIFORNIA 92841
800-854-6417
FAX 714-895-2141
www.cmadishmachines.com Buy Parts
TABLE OF CONTENTS
MODEL CMA-180 VL
1. PARTS MANUAL ………………………………………………………………………………3
1.1. INITIAL PARTS KIT #1100.16 ………………………………………………………………………………………….. 3
1.2. EXPLODED VIEW DRAWINGS…………………………………………………………………………………………….. 4
1.2.1. Straight Frame System Assembly……………………………………………………………………………….. 4
1.2.2. Heat Recovery System………………………………………………………………………………………………. 5
1.2.3. Drain System Assembly (Ventless Unit)………………………………………………………………………. 6
1.2.4. 1.2.5. 1.2.6. 1.2.7. 1.2.8. 1.2.9. 1.2.10. 1.2.11. 1.2.12. 1.2.13. 1.2.14. 1.2.15. 1.2.16. 1.2.17.
Plumbing System Assembly……………………………………………………………………………………. 7-9 Wash Spray System ………………………………………………………………………………………………… 10 Final Rinse System Assembly…………………………………………………………………………………….11 CMA-180 Door Handle Assembly ……………………………………………………………………………..12 Pump System Assembly…………………………………………………………………………………………….13 Wash Tank Heater (Triangular Flange) ……………………………………………………………………..14 Booster Tank Heater (Triangular Flange) ………………………………………………………………….15 Control Box Assembly………………………………………………………………………………………………16 Heat Recovery System Control Box ……………………………………………………………………………17 Heat Recovery System Control Box 480V……………………………………………………………………18 Door Safety Interlock (DSI) Assembly P/N 17712.84…………………………………………………..19 Unique Parts For CMA-180VL-T ………………………………………………………………………………20 Unique Parts for CMA-180T Split Door……………………………………………………………………..21 Water Tempering Kit (Optional)………………………………………………………………………….22&23
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 2
1. Parts Manual
1.1.
Initial Parts Kit #1100.16
P/N 00121.17 00200.10 00206.30 00304.29 00307.20 00363.00 00404.85 00409.93
00411.00 00421.78 00421.89 00421.90 00475.70 00562.00 00602.20 00631.05
00706.00 00707.00
00735.00 00738.15 03202.00 03408.55 03470.00 03623.00 13003.17 13003.55
13304.55 13417.92 13422.71 13463.14 13605.00 15518.00 17523.51
DESCRIPTION
Qty
CMA-180 Drain Stopper
1
Pump Assy. 115/220V 60Hz (Open)
1
Pump Seal Kit
1
Rinse Arm w/ Bearings
1
Spray Arm Assy w/bearing & end plugs
1
Spray Base Pull Lock Pin
1
Contactor 208/240V 20 Amp
1
CMA-180VL Timer Assy
1
Micro Switch
1
Illuminated Plug CMA-180/44 P
1
Rocker Switch Auto Fill
1
Power Switch Red 250V
1
Toggle Switch DPDT 15 Amp/Delimer
1
Roller Door Switch
1
Door Spring
1
Ice Cube Relay 220V 12 Amp
1
3/4 Water Solenoid Repair Kit JE
1
1/2 Water Solenoid Repair Kit JE
1
3/4 Vac Breaker Rep Kit Watts
1
Solenoid Coil JE 220V (3/4 & 1/2)
1
Wash Thermometer. (Rinse PN3202.18)
1
Counter – Face Mount 220V/50Hz
1
Toggle Switch (Momentary) Screw Term
1
½” Vac Breaker Repair Kit Watts
1
Contactor 60 Amp 3 Pole
1
Contactor 30 Amp
1
SS Final Rinse Spray Jet SS
1
Heater Thermostat
1
Immersion Heater 240V/12kW T-Flange
1
Liquid Level Switch-Long-D Flat
1
Pressure Gauge(PN13605.45 MFG after Jan 2020) 1
Immersion Heater 6kW208-240V T-Flange
1
Hi Limit Switch 250 Deg
1
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 3
1.2. Exploded View Drawings
1.2.1. Straight Frame System Assembly
ITEM NO.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16
NO. REQ’D
1 1 1 6 6 2 1 1 1 2
1 1 1 1 1 1
P/N
DESCRIPTION
17532.18 17506.37 17506.38 00636.17 17554.00 17552.00 01505.16 01505.10 17506.65 17510.00
Frame Stand Left Door Ventless Right Door E Z Door Glide Door Guide Door Stop Corner Tray Track Rail Tray Track (EST/EC/ 180) Door Service Splash Guard Strainer Basket
01579.10 01579.20 17579.00 17511.00 17402.00 01516.50
Scrap Body SS Scrap Trap Drawer Scrap Trap Holder Overflow Overflow Gasket 3-Dr Bracket outside Style
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
ITEM NO. 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32
NO. REQ’D
60 30 4 1 1 23 1 1 2 1
1 1 1 2 4 —
P/N
DESCRIPTION
00924.00 00912.00 01310.00 17522.50 17522.00 00914.10 17591.00 17531.00 17506.60 17506.62
¼” SS Washer ¼”-20 Nylon Lock Nut Bullet Feet Wash Tank Heater Cover Booster Heater Cover 1/4-20 X 5/8 Hex Bolt CMA-180 Ventless Wrapper Pan Door Panel Splash Guard 180 Splash Shield – lever side
17546.00 00449.50 17506.36 17530.45 01572.10 01145.00
CMA-180VL Skirt Keyless Lock Front Door Frame Support Bar SS Leg (A, AH, C, B) Leg Assembly, 10″ w/Bullet Foot
Buy Parts
page 4
1.2.2. Heat Recovery System
ITEM NO. NO. REQ’D P/N
1
1 17595.00
2
1 02401.01
3
1 02401.17
4
1 17593.00
5
1 02401.05
6
1 17596.00
7
1 17598.00
8
1 17597.00
9
2 40014.00
10
3 03101.45
11
1 17592.00
DESCRIPTION
CMA-180 Ventless Top Cover Motor Fan 230V, 50/60Hz Battery Self Cleaning Pipe
Incl 6-#15 CMA-180 Ventless Fan Mount Heat Recovery Battery CMA-180 Ventless
Rear Cover CMA-180 Ventless Support L.H. CMA-180 Ventless Support R.H. 1/2m x
1/2 Barb Straight Hose Clamp #4 CMA-180 Ventless Drain Pan
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
ITEM NO.
NO. REQ’D
P/N
12
1 03101.00
13
1 15605.00
14
1 17591.00
15
7 02101.01
16
FT 03107.51
17
FT 03107.50
18
1 17594.00
19
1 06231.15
20
1 17599.15
21
6 00982.00
22
6 00981.00
DESCRIPTION
Hose Clamp #16 1″ Drain Hose with Goose Neck (9-06) CMA-180 Ventless Wrapper
Stainless Steel Rinse Nozzle Flexible Black Hose 3/8″ Order per foot Flexible
Black Hose ½” Order per foot CMA-180 Ventless Shroud CMA Ventless Label 23.25
x 3.25 Heat Recovery Battery Insulation Phillips Truss Screws Nylon Pop-in Nut
Buy Parts
page 5
1.2.3. Drain System Assembly (Ventless Unit)
ITEM NO.
1
NO. REQ’D
1
P/N 00113.17
DESCRIPTION Drain Tee Casting
2
1
00114.00 Drain Tee Gasket
3
1
00121.18 Drain Stopper “O” Ring
*4
1
00121.17 Drain Stopper
5
1
17581.00 Drain Linkage
6
1
17580.50 Drain Linkage Spacer
7
1
00912.00 ¼-20 Nylon Lock Nut
8
1
17580.00 Drain Lever
9
1
00910.00 ¼”-20 x 1 ½” Hex Head Bolt
10
16 00926.00 5/16 S/S Washer
11
6
00901.00 5/16 18 x 1″ Hex Head Bolt
-
00121.17 includes #00121.18
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
ITEM NO. 12 13 14 15 16 17 18 19 20 21 22
NO. REQ’D
6 1 1 1 1 1 1 1 1 1 1
P/N
13805.00 01313.00 05030.17 01312.00 05030.27 01320.17 05030.10 01315.17
50302.42 03101.00 15605.00
DESCRIPTION
5/16-18 Nylon Lock Nut 2″ PVC Slip x MIPT Adapter 2″ x 4″ PVC Tubing PVC Slip
x Slip 90 Elbow 2″ x 6″ PVC Tubing 2″ PVC Tee SxSxS 2″ x 3″ PVC Tubing 2″ No
Hub 180VL Drain Hose Fitting Hose Clamp #16 1″ Drain Hose with Goose Neck
Buy Parts
page 6
1.2.4. Plumbing System Assembly (May 2023)
ITEM NO.
1 1A 1B 1C 1D 2 3 4 5 6 7 8 9 10 11 11A 11B 11C 11D
NO. REQ’D
1 —-1 1 2 2 2 6 4 3 1 3 1 —-
P/N
03624.00 00421.51 03624.25 03623.00 00739.50 00745.00 00747.10 00721.00
13639.00 13633.00 00912.00 00912.00 01526.10 01526.00 03603.15 00738.15
03603.20 00786.00 00707.00
DESCRIPTION
Vacuum Breaker 1/2″ Watts Pan Head Screw SS 6-32 x 1/4″ Vacuum Breaker Brass
Bonnet 1/2″ Vacuum Breaker Repair Kit 1/2″ Vacuum Breaker Cap Street Elbow
1/2″ 90Deg Nipple 1/2″ x 5″ Brass Jamb Lock Nut Thin Pattern Nipple SS 3/4 x
Close 3/4 90 Elbow FxF Brass 1/4-20 Nylon Lock Nut 1/4-20 Nylon Lock Nut
Plumbing Bracket Strap Plumbing Support Bracket 1/2 Solenoid Valve JE
240V/60Hz Water Sol Valve Coil 220V Water Sol Valve Bonnet ½” Water Sol
Plunger ½” & ¾” w/spring Water Sol Repair Kit JE ½”
ITEM NO. 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
NO. REQ’D Per FT
1 1 8 3 1 1 Per FT 2 2 2 2 2 1 1 1 1 1 1
P/N
03107.51 40014.10 13642.00 03614.00 00743.10 40014.00 13602.20 03107.50
41062.00 01528.00 00924.00 00906.00 40116.00 13604.00 00425.24 13618.11
13605.45 03202.00 03202.18
DESCRIPTION
Flexible Black Hose 3/8″ 1/2m x 3/8″ Barb Straight 1/2″ MIP Plug Brass Sq.
Head Nipple Brass 1/2″ Close Tee ½” FxFxF 1/2m x 1/2″ Barb Straight Pressure
Regulator 1/2 Flexible Black Hose ½” 1/2″ Strainer Ball Valve Plumbing Support
Bracket 1/4 SS Washer 1/4-20 X 1/2 Hexhead Bolt 1/4 Comp x 1/4 MIP Fitting 1/2
x 1/4 Bushing Brass Chemical Tubing Coupling ¼” Brass Pressure Gauge Wash
Thermometer Final Rinse Thermometer
MODEL CMA180VL PARTS MANUAL Rev. 2.04
Buy Parts
page 7
1.2.4. Plumbing System Assembly (January 2020)
ITEM NO.
1 1A 1B 1C 1D 2 3 4 5 6 7 8 9 10 11 11A 11B 11C 11D
NO. REQ’D
1 —-1 1 2 2 2 6 4 3 1 3 1 —-
P/N
00710.50 00421.51 00735.60 00735.00 00739.50 00704.00 13613.00 13606.10
13639.00 13633.00 00912.00 00912.00 01526.10 01526.00 03603.15 00738.15
03603.20 00786.00 00707.00
DESCRIPTION
Vacuum Breaker ¾” Watts Pan Head Screw SS 6-32 x 1/4″ Vacuum Breaker Brass
Bonnet ¾” Vacuum Breaker Repair Kit ¾” Vacuum Breaker Cap Street Elbow 3/4″
90Deg Nipple ¾” x 5 ½” Brass Jamb Lock Nut Thin Pattern Nipple SS 3/4 x Close
3/4 90 Elbow FxF Brass 1/4-20 Nylon Lock Nut 1/4-20 Nylon Lock Nut Plumbing
Bracket Strap Plumbing Support Bracket 1/2 Solenoid Valve JE 240V/60Hz Water
Sol Valve Coil 220V Water Sol Valve Bonnet ½” Water Sol Plunger ½” & ¾”
w/spring Water Sol Repair Kit JE ½”
ITEM NO. 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
NO. REQ’D Per FT
1 1 8 3 1 1 Per FT 2 2 2 2 2 1 1 1 1 1 1
P/N
03107.51 40014.10 13642.00 03614.00 00743.10 40014.00 13602.20 03107.50
41062.00 01528.00 00924.00 00906.00 40116.00 13604.00 00425.24 13618.11
13605.45 03202.00 03202.18
DESCRIPTION
Flexible Black Hose 3/8″ 1/2m x 3/8″ Barb Straight 1/2″ MIP Plug Brass Sq.
Head Nipple Brass 1/2″ Close Tee ½” FxFxF 1/2m x 1/2″ Barb Straight Pressure
Regulator 1/2 Flexible Black Hose ½” 1/2″ Strainer Ball Valve Plumbing Support
Bracket 1/4 SS Washer 1/4-20 X 1/2 Hexhead Bolt 1/4 Comp x 1/4 MIP Fitting 1/2
x 1/4 Bushing Brass Chemical Tubing Coupling ¼” Brass Pressure Gauge Wash
Thermometer Final Rinse Thermometer
MODEL CMA180VL PARTS MANUAL Rev. 2.04
Buy Parts
page 8
1.2.4. Plumbing System Assembly
ITEM NO.
1 1A 1B 1C 1D 2 3 4 5 6 7 8 9 10 11 11A 11B 11C 11D 12
NO. REQ’D
1 —-1 1 2 2 2 6 4 3 1 3 1 —FT
P/N
00710.50 00421.51 00735.60 00735.00 00739.50 00704.00 13613.00 13606.10
13639.00 13633.00 00912.00 00912.00 01526.10 01526.00 03603.15 00738.15
03603.20 00786.00 00707.00 03107.51
DESCRIPTION
Vacuum Breaker ¾” Watts Pan Head Screw SS 6-32 x 1/4″ Vacuum Breaker Brass
Bonnet ¾” Vacuum Breaker Repair Kit ¾” Vacuum Breaker Cap Street Elbow 3/4″
90Deg Nipple ¾” x 5 ½” Brass Jamb Lock Nut Thin Pattern Nipple SS 3/4 x Close
^3/4 90 Ell F x F Brass 1/4-20 Nylon Lock Nut 1/4-20 Nylon Lock Nut Plumbing
Bracket Strap Plumbing Support Bracket 1/2 Solenoid Valve JE 240V/60Hz Water
Sol Valve Coil 220V Water Sol Valve Bonnet ½” Water Sol Plunger ½” & ¾”
w/spring Water Sol Repair Kit JE ½” Flexible Black Hose 3/8″
ITEM NO. 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
NO. REQ’D
1 1 8 3 1 1 FT 2 2 2 2 2 1 1 1 1 1 1 1
P/N
40014.10 13642.00 03614.00 00743.10 40014.00 13602.20 03107.00 41062.00
01528.00 00924.00 00906.00 40116.00 13604.00 00425.54 13618.11 13605.45
03202.00 03202.18 17534.50
DESCRIPTION
1/2m x 3/8″ Barb Straight /2″ MIP Plug Brass Sq. Head Nipple Brass 1/2 Close
Tee ½” FXFXF 1/2m x 1/2 Barb Straigh Pressure Regulator 1/2 Flexible Black
Hose ½” ^1/2 Strainer Ball Valve Plumbing Support Bracket 1/4 SS Washer 1/4-20
X 1/2 Hexhead Bolt 1/4 Comp x 1/4 MIP Fitting 1/2 x 1/4 Bushing Brass Chemical
Tubing Coupling ¼” Brass Pressure Gauge 180-UC Thermometer “Wash” Thermometer
“Rinse” Gauge Bracket
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 9
1.2.5. Wash Spray System
ITEM NO.
1 *2 **3 4 5 6 7 8
NO. REQ’D
1 1 1 2 4 2 4 12
P/N
00303.17 00360.24 00361.10 00304.17 00308.50 00302.51 00905.00 00924.00
DESCRIPTION
Manifold Lower Spray Base Assembly Upper Spray Base Assembly Wash Spray Arm
Spray Arm End Plug SS Spray Base “O” Ring Truss Head Bolt ¼”-20″x1/2″ SS
Washer ¼”
*P/N 00361.10 Includes Items 11,12 & 6 P/N 00360.24 Includes Items 11, 12 & 6
ITEM NO.
9 10 11 12 13 14 15 16 17
NO. REQ’D
8 4 2 4 1 1 1 1 2
P/N
00912.00 00914.10 00966.10 00363.00 00302.00 00225.00 00221.20 00759.17
00341.00
DESCRIPTION
Nylon Lock Nut ¼” 20 Hex Head Bolt ¼”-20″x5/8″ Hex Head SS Bolt 10-32 Spray
Base Lock Pin Spray Base Gasket Compression Gasket 1″ Comp. Fit.x1″MIP SS Base
Quick Release W/Nipple Spray Arm Bearing
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 10
1.2.6. Final Rinse System Assembly
ITEM NO.
1 2
3 4 5
NO. REQ’D
1 2
1 6 4
P/N 17401.00 04306.00
13607.40 00914.00 00308.17
DESCRIPTION
Final Rinse Manifold Square Manifold Gasket (CMA-180) 180VL Final Rinse Pipe
Ass. ¼”-20×5/8 Hex Bolt Rinse Arm SS End Plug
6
2
00304.29 Rinse Arm w/ Bearings
(180&180UC)
7
6
00912.00 ¼”-20 Nylon Lock Nut
8
6
00924.00 ¼”SS Washer
9
1
13607.20 3/8 Compression Fitting
Sleeve
10
1
05004.11 3/8″ SS Tubing
11
1
00436.20
3/8″ Comp X 1/2″ MIP Fitting
11A
1
13607.10 3/8 Compression Fitting Nut
12
1
13669.45 Mixing Chamber SS CMA
180UC
13
1
03232.00 1/8 Male Plug
14
1
13629.00 ½” S.S. Close Nipple
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
ITEM NO. 15
15A
NO. REQ’D
1
—
P/N 03624.00 03623.00
DESCRIPTION ½” Vacuum Breaker ½” Vacuum Breaker Kit
15B
—
03624.25 ½” Brass Bonnet
15C
—
00739.50 ¾” Vacuum Breaker Cap
15D
—
00421.51 6-32 x ¼” SS Pan Head
Screw Phillips
16
1
00760 .00 5/8 Comp x 1/2 MIP
Adapter
17
1
13607.44 180VL Rinse Plumbing
Line
18
1
17550.11 1/2 90Deg Street Elbow
19
FT 03107.00 Flexible Black Hose ½”
Order per foot
20
1
03101.45 Hose Clamp #4
21
1
40014.00 1/2m x 1/2 Barb Straight
22
1
00743.00 1/2 Tee F x F x F Brass
(Plated)
23
1
13642.00 1/2″ Male Plug Brass
24
1
4305.17 Red Silicone Gasket
(CMA-180)
25
1
13607.55 CMA-180VL F.R.
Thermometer Fitting
26
1
15606.00 Conduit Heat Shield
Buy Parts
page 11
1.2.7. CMA-180 Door Handle Assembly
ITEM NO.
1 2 3 4 5 6 7 8 9 10 11 12
NO. REQ’D
1 1 2 2 2 2 2 2 2 4 8 8
P/N
00613.32 01556.50 00603.07 00602.00 17552.00 01553.00 00606.50 00926.00
00900.00 00906.00 00924.00 00912.00
DESCRIPTION
Door Handle Right Door Handle Support Door Spring Extension Rod Door Spring
Door Stop Door Handle Link Turn Buckle 5/16″ SS Washer Cotter Pin ¼”-20 x ½”
Hex Head screw ¼” SS Washer ¼”-20″ Nylon Insert Lock Nut
ITEM NO. 13 14 15 16 17 18 19 20 21 22 23
NO. REQ’D
4 4 2 1 2 1
1 1 1 1 1
P/N
00610.00 00611.00 00607.04 01555.50 00910.00 00563.40 00563.42 00562.00
00562.60 00605.30 00546.00
DESCRIPTION
Door Handle Spacer (Small) Door Handle Spacer (Large) Door Handle Cap Left
Door Handle Support ¼”-20×1/2″ Hex Head Bolt Door Switch Bracket (8-08) Door
Switch Actuator (8-08) Door Roller Switch Connector Door Roller Switch Door
Rod Spacer 18 AWG Switch Cord
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 12
1.2.8. Pump System Assembly
ITEM NO.
1
2 3 3A 4 5 6 7
NO. REQ’D
1
1 6 2 1 1 1 1
P/N
00201.00 00201.85 04207.10 00921.00 00975.00 00206.30 03226.00 03222.10
04207.20
DESCRIPTION
Pump Motor 1 HP115/230V Pump Motor 1 HP230/460V Small Pump Base 3/8″-16 x 34″
Hex Head Bolt 3/8-16 x 1 ½” Stud Pump Seal Kit Pump “O” Ring Impeller SS Pump
Cover
ITEM NO.
8
NO. REQ’D
1
P/N 00208.40
DESCRIPTION Slip Joint Nut Gasket
9
1
04204.00 Compression Nut (2.5)
10
2
00906.00 ¼-20 x 1/2″ Hex Bolt
11
2
00924.00 ¼” SS Washer
12
2
00912.00 ¼”-20 Nylon Lock Nut
13
2
00238.00 3/8″ Male Plug
*14 Assy. 00200.10 Pump Assy
15
1
00208.21 Slip Joint Nut Friction Ring
*P/N 00200.85 Includes Items 1,2,3,4,5 and 6
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 13
1.2.9. Wash Tank Heater (Triangular Flange)
ITEM NO.
1
1A 2 3 4 5 6
NO. REQ’D
1
1 1 1 1 1 1
P/N
15518.00 13422.76 13417.92 13463.14 13463.51 17523.51 13477.20 15518.11
DESCRIPTION
Heater 6kW 220V Triangular Flange Heater 6kW 480V Triangular Flange Heater
Thermostat Liquid Level Switch Liquid Level Switch Shield Hi-Limit Switch –
Wash 250 Degrees 7/8″ Probe Hole Plug Gasket for Triangular Flange Heater
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 14
1.2.10. Booster Tank Heater (Triangular Flange)
ITEM NO.
1 2 3 4
4A 5 *6 7 8 9
NO. REQ’D
1 3 3 1
1 1 1 1 1 1
P/N
17550.20 13805.00 00926.00 13422.71 13422.75 13417.92 17523.51 17520.00
15518.11 17560.00 40116.00
DESCRIPTION
Booster Tank Nylon Lock Nut 5/6″-18 Washer SS 5/16″ 240V 12KW Triangular
Immersion Htr 480V 12 kW Triangular Immersion Htr Thermostat 12KW Heater Hi-
Limit Switch-Booster 250 degrees Booster Heater Shield* Gasket for Triangular
Flange Heater Complete Assembly 1/4 Comp x 1/4 MIP Fitting
MODEL CMA-180 VL PARTS MANUAL Rev. 2.04
Buy Parts
page 15
1.2.11. Control Box Assembly
ITEM NO.
1
NO. REQ’D
1
P/N 17503.39
DESCRIPTION CMA-180 Control Box Body
2
2
00470.10 Toggle Switch Rubber Boot
3
1*
00409.93 Timer CMA-180
3A
1
00500.20 Timer Motor
4
1(2*)
00631.05 Ice Cube Relay 220V
5
6 Ft.
00400.85 Conduit ¾” Sealtite
6
6 Ft.
00400.10 Conduit ½” Sealtite
7
2 Ft.
00400.00 Conduit 3/8″ Sealtite
8
1
00401.85 St-3/4″ Straight Connector
9
1
00401.10 St-1/2″ Straight Connector
10
1
00401.00 St-3/8″ Straight Connector
11
1
00475.70 Delimer Switch DPDT 15A
12
1
03470.00 Toggle Switch Momentary (Screw Terminal)
13
8
03801.00 Nylon Lock Nut 10-32
14
1
17400.06 Mountain Din Rail
15
1
13403.26 Fuse 3A/250V Slow Blow
16
2
00941.00 Pan Head Screw 10 -32 x 5/8″
17
1
17400.17 Terminal Block Assembly
17A
2
17400.04 30 Amp Terminal Block-Red
17B
3
17400.03 60 Amp Terminal Block-Black
17C
4
17400.02 85 Amp Terminal Block-Natural
17D
2
17400.08 30 Amp Terminal Block-Blue
17E
2
17400.09 30 Amp Terminal Block-Natural
- Includes timer motor p/n 501.17 and microswitch 411.00
ITEM NO. 17F 18 19 20 21 22 23 24
25 26 27 27A 28 29 30 31 32 33 34 35 36
NO. REQ’D
1 1 4 4 1 1 1 1
6 6 2 2 1** 1 1 1 1 1 1 1 1
P/N
17400.07 03408.55 00911.00 00927.00 00421.90 00449.50 00421.89 00404.85
13003.55 13825.00 04806.00 17503.17 17503.18 13003.17 13418.60 13003.55
00562.60 00562.00 13426.50 00421.78 006231.19 17503.29
DESCRIPTION
60 Amp Terminal Block-Green Counter Face Mount 220V Pan Head Screw 8-32 x 1/2″
Lock Nut 8-32 Power Switch Keyless Lock Rocker Switch Auto Fill Motor
Contactor 208/240V 20A Motor Contactor 30 Amp Pan Head Screw 8-31 x 1″ #10
Brass Washer Control Box Sponge Long Control Box Sponge Short Contactor 60A 3
Pole 220V Dip Switch Timer 230V Heater Contactor 30 Amp Door Roller Switch
Connector Door Roller Switch Ground Block Illuminated Plug Control Panel Label
CMA-180 Control Box Lid
** Only for the machines with booster heater
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 16
1.2.12. Heat Recovery System Control Box
ITEM NO.
1 2 3 4 5 6 7 8 9
NO. REQ’D
1 1 1 1 4 4 4 2 2
P/N
13905.23 13905.13 13418.60 00631.05 00940.50 0013805 00926.00 00907.00
00965.00
DESCRIPTION
Transformer Box Lid Transformer Box Dip Switch Timer 230 V Ice Cube Relay 220V
12 Amp 10-32 X 3/8 Truss Head Screw 5/16-18 Nylon Insert Lock Nut 5/16 SS
Washer 6-32 X 1/2 SS Panhead Screw 6-32 Nylon Insert Lock Nut
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 17
1.2.13. Heat Recovery System Control Box 480V
ITEM NO.
1 2 3 4 5 6 7 8 9 10
NO. REQ’D
1 1 1 2 1 1 2 4 1 4
P/N
13905.24 13420.10 00631.05 13402.10 13905.14 13423.82 13403.40 13403.21
13418.60 00940.50
DESCRIPTION
Transformer Box Lid 180VL, 480V Fuse Clip 2-Poll, Pressure Plate Ice Cube
Relay 220V Fuse 1.50 Amp, 480V Slow Blow Transformer Box 180VL, 480V
Transformer 480V-240V Fuse 1.25 Amp, 230V Slow Blow Fuse Holder – Inline Dip
Switch Timer 230 V 10-32 3/8 Truss Head Screw
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 18
1.2.14. Door Safety Interlock (DSI) Assembly P/N 17712.84
ITEM NO.
1 2 3 4 5 6 7
NO. REQ’D
1 1 5 1 1 4 1
P/N
03801.40 17712.30 00927.00 00902.00 17712.35 00970.60 00100.05
DESCRIPTION
10-32 x 1/2 Cone Screw DSI Cover 8-32 Nylon Lock Nut 8-32 X 1 1/4 Panhead Bolt
DSI Mount 8-32 x 1/2 Flat Screw Drain Ball Solenoid 240V
ITEM NO.
8 9 10 11 12 13 14 15
NO. REQ’D
1 1 4 4 4 1 1 1
P/N
17712.50 17711.11 00912.00 00924.00 00906.00 00562.60 00547.00 01550.00
DESCRIPTION
Solenoid Spring CMA-180VL Interlock Bar 1/4-20 Nylon Lock Nut 1/4-20 Nut w/
Grip Washer 1/4-20 X 1/2 Hexhead Bolt Roller Door Switch Switch Cord 18 AWG
Solenoid Stop
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 19
1.2.15. Unique Parts For CMA-180VL-T
ITEM NO.
1 2 3 4 5 6 7 8
NO. REQ’D
6 3 6 1 1 2 2 2
P/N
00636.27 17506.20 17554.20 17530.20 00613.27 01553.22 00603.53 05007.27
DESCRIPTION
Door Guide 36 1/4″ Scullery Door Scullery Door Guide Scullery Wrapper Door
Handle S Door Handle Link S Door Spring Extension Rod Booster Water Line
9
1
17401.20 Final Rinse Manifold
10
1
50302.10 1″ MPT x 1″ Barb Brass
11
1
00303.27 Manifold
12
1
00212.50 1-1/2″x1-1/4″Adapter
ITEM NO. 13 14 15 16 17 18 19 20
21
22
23
NO. REQ’D
1 1 1 1 1 1 1 1 1 1
1
2
P/N 00204.00 00203.05 00202.00 00205.00 03108.60 00208.40 00207.00 17570.00
17570.10 00563.40
00563.43
00602.20
DESCRIPTION
Pump Cover Large Impeller 4-1/2″ Pump Base Pump Gasket
Transfer Hose 1″ Reinf. Slip Joint Nut O Ring Slip Joint Nut 11/2 x 1/4 Wrap
Support Brkt-R Wrap Support Brkt-L Door Switch Bracket (808) Door Switch
Actuator CMA-180T (1-10) Door Spring – Heavy Duty
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 20
1.2.16. Unique Parts for CMA-180T Split Door
ITEM NO.
1 2 3 4 5
NO. STR/COR
1/0 1/0 1/0 6/4 6/4
P/N
17506.23 17506.24 13701.22 00636.43 00636.42
DESCRIPTION
Door Safety Brkt. Left Door Safety Brkt. Right Open Door Latch EZ Glide Door
Gide 8.5″ EZ Glide Door Gide 29.75″
6
3/2
17506.42 Small Door
ITEM NO.
7 8 9 10 11
NO. STR/COR
3/2 1/1 6/4 0/1 1/1 1/0
P/N
17506.34 17530.22 17552.22 17530.23 17570.00 17570.10
DESCRIPTION
Large Door Wrapper Door Stop Corner Panel Wrap Wrap Support Brkt-R Wrap
Support Brkt-L
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 21
1.2.17. Water Tempering Kit (Optional)
Model CMA-180 VL Parts Manual Rev. 2.04
Buy Parts
page 22
Parts Manual
Drain Water Tempering Valve Assembly (Effective 03-2023) PN13475.02 Factory
Installed Kit PN13476.02 Field Installed Kit
5
4
3
ITEM NO.
NO. REQ’D P/N
DESCRIPTION
1
1 13470.88 2 ABS Tee S x S x MIP
2
1 13470.87 DTV Adapter 2″ X 3/4″
3
1 13470.85 Drain Water Tempering Valve
4
1 00742.00 Nipple Brass 1/2 x 1-1/2
5
1 00715.00 1/2 Ball Check Valve
6
1 05030.10 2 x 3 ABS Tubing
2
1
Model CMA-180 VL Parts Manual Rev. 2.04
6
Buy Parts
Page 23
References
- CMA Dishmachines – Commercial Glass & Warewashing Equipment
- CMA Dishmachines – Commercial Glass & Warewashing Equipment
- CMA Dishmachines - Parts and Supplies | USA-CLEAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>