ABB 1SAM350010R1015 Manual Motor Starter 25 … 32 A User Manual

: June 13, 2024
: ABB

Table of Contents

ABB 1SAM350010R1015 Manual Motor Starter 25 … 32 A
Product Details
Product Information
Product Usage Instructions
General Information
Ordering
Popular Downloads
Dimensions
Technical
Technical UL/CSA
Environmental
Certificates and Declarations
Container Information
Classifications
Accessories
Categories
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ABB 1SAM350010R1015 Manual Motor Starter 25 … 32 A

Product Details

Extended Product Type	MS132-32K
Product ID	1SAM350010R1015
EAN	4013614400452
Catalog Description	MS132-32K Manual Motor Starter 25 … 32 A

Product Information

The MS132-32K manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 32.0 A with Push-in spring terminals. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The MS132-K manual motor starter offers a rated service short- circuit breaking capacity Ics = 30 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip- free mechanism and a rotary handle with a clear switch position indication. The MS132-K manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips and terminal spacers are available as accessory.

Product Usage Instructions

To use the MS132-32K manual motor starter, follow these steps:

Make sure the power supply to the motor is turned off.
Connect the motor to the Push-in spring terminals of the manual motor starter.
Turn the rotary handle of the manual motor starter to the “OFF” position.
Turn on the power supply to the motor.
To start the motor, turn the rotary handle of the manual motor starter to the “ON” position.
To stop the motor, turn the rotary handle of the manual motor starter back to the “OFF” position.
Note: The MS132-32K manual motor starter is suitable for both three-phase and single-phase applications. Make sure to follow the appropriate wiring diagram for your specific application.

General Information

Extended Product Type MS132-32K
Product ID 1SAM350010R1015
EAN 4013614400452
Catalog Description MS132-32K Manual Motor Starter 25 … 32 A
Long Description The MS132-32K manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 32.0 A with Push-in spring terminals. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The MS132-K manual motor starter offers a rated service short-circuit breaking capacity Ics = 30 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The MS132-K manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips and terminal spacers are available as accessory.

Ordering

Minimum Order Quantity 1 piece
Customs Tariff Number 85362010

Popular Downloads

Data Sheet, Technical Information 1SBC100212C0203
Instructions and Manuals 2CDC131120M6801
Instructions and Manuals (Part 2) 2CDC131060M0202
Ex Operating Instructions 2CDC131063M6801
Time-Current Characteristic Curve 1SAM300505F0015
I²t Characteristic
- 1SAM300507F0001
- 1SAM300507F0003
Cut-off Current Characteristic
- 1SAM300508F0001
- 1SAM300508F0003
CAD Dimensional Drawing 2CDC001079B0201
Installation Video
- 9AKK108466A6074
- 9AKK108466A6068
Marketing Video
- 9AKK107991A4712
- 2CDC131153V0201

Dimensions

Product Net Width 45 mm
Product Net Height 112 mm
Product Net Depth /Length 87 mm
Product Net Weight 0.316 kg

Technical

Rated Service Short- Circuit Breaking Capacity (Ics)
- (230 V AC) 30 kA
- (250 V DC) 3 Poles in Series 10 kA
- (400 V AC) 30 kA
- (440 V AC) 30 kA
- (500 V AC) 10 kA
- (690 V AC) 3 kA
Rated Ultimate Short- Circuit Breaking Capacity (Icu)
- (230 V AC) 50 kA
- (400 V AC) 50 kA
- (440 V AC) 30 kA
- (500 V AC) 10 kA
- (690 V AC) 3 kA
Rated Instantaneous Short-Circuit Current Setting (Ii) 480 A
Setting Range 25 … 32 A
Rated Operational Power AC-3 (Pe) (400 V) Three Phase 15 kW
Rated Operational Power AC-3e (Pe) (400 V) Three Phase 15 kW
Rated Operational Voltage
- Main Circuit 690 V AC
- Main Circuit 250 V DC
Rated Operational Current (Ie) 32 A
Rated Operational Current AC-3 (Ie) 32 A
Rated Operational Current AC-3e (Ie) 32 A
Rated Operational Current DC-5 (Ie) 32 A
Rated Frequency (f)
- Main Circuit 50 Hz
- Main Circuit 60 Hz
Rated Impulse withstand Voltage (Uimp Main Circuit 6 kV
Rated Insulation Voltage (U;) 690 V
Power Loss at Rated Operating Conditions per Pole 1.9 … 3.1 W
Number of Poles 3
Conventional Free-air Thermal Current (Ith) Main Circuit 32 A
Degree of Protection
- Housing IP20
- Main Circuit Terminals IP20
Pollution Degree 3
Electrical Durability 50000 cycle
Mechanical Durability 100000 cycle
Terminal Type Push-in Spring Terminals
Connecting Capacity Main Circuit
- Flexible with Ferrule 1/2x 0.5 … 4 mm²
- Flexible with Insulated Ferrule 1x 0.5 … 4 mm²
- Flexible with Insulated Ferrule 2x 0.5 … 2.5 mm²
- Flexible 1/2x 0.75 … 4 mm²
- Solid 1/2x 1 … 2.5 mm²
- Stranded 1/2x 1 … 6 mm²
Wire Stripping Length Main Circuit 12 mm
Recommended Screw Driver Pozidriv 2
Mounting Position 1 … 6
Mounting on DIN Rail
- TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
- TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
Minimum Mounting Distance
- Electrical Conductive Board, Horizontal – Up to 400 V 0 mm
- Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm
- Electrical Conductive Board, Vertical 75 mm
- Other Device Same Type, Horizontal 0 mm
- Other Device Same Type, Vertical 150 mm
Actuator Type Rotary Handle
Contact Position Indication ON / OFF / TRIP
Standards
- IEC/EN 60947-1
- IEC/EN 60947-2
- IEC/EN 60947-4-1
- UL 60947-1
- UL 60947-4-1
Remarks UL508 Self-Protected Combination Motor Controller (Type E) in combination with terminal spacer TS1-M3-K

Technical UL/CSA

Short-Circuit Current Rating (SCCR)
- Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 30 kA
- Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 30 kA
- Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 18 kA
- Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 30 kA
- Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 18 kA
- Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 30 kA
- Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 18 kA
Maximum Operating Voltage UL/CSA Main Circuit 600 V AC
Horsepower Rating UL/CSA
- (200 V AC) Three Phase 7.5 Hp
- (208 V AC) Three Phase 10 Hp
- (220 … 240 V AC) Three Phase 10 Hp
- (440 … 480 V AC) Three Phase 20 Hp
- (550 … 600 V AC) Three Phase 25 Hp
Full Load Amps Motor Use
- (200 V AC) Three Phase 25.3 A
- (208 V AC) Three Phase 30.8 A
- (220 … 240 V AC) Three Phase 28 A
- (440 … 480 V AC) Three Phase 27 A
- (550 … 600 V AC) Three Phase 27 A
Locked Rotor Amps
- (200 V AC) Three Phase 146 A
- (208 V AC) Three Phase 179 A
- (220 … 240 V AC) Three Phase 162 A
- (440 … 480 V AC) Three Phase 145 A
- (550 … 600 V AC) Three Phase 146 A
General Use Rating UL/CSA (600 V AC) 32 A
Connecting Capacity Main Circuit UL/CSA
- Stranded 1/2x 18-10 AWG
- Stranded 1x 8 AWG

Environmental

Ambient Air Temperature
- Around the Enclosure 0 … +40 °C
- Operation -25 … +70 °C
- Operation Compensated -25 … +60 °C
- Storage -50 … +80 °C
Ambient Air Temperature Compensation Yes
Maximum Operating Altitude Permissible 2000 m
Resistance to Shock acc to IEC 60068-2-27. 11 ms Pulse 25g
Resistance to Vibrations acc. to IEC 60068-2-6 5g / 3 … 150 Hz
RoHS Status Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019