JBLCLIP5WHTAM Portable Bluetooth Speaker Clip 5 User Guide
- August 22, 2024
- JBL
Table of Contents
JBLCLIP5WHTAM Portable Bluetooth Speaker Clip 5
Product Information
Specifications:
- Transducer: 45 mm / 1.75″
- Output power: 7 W RMS
- Signal-to-noise ratio: > 85 dB
- Battery type: Lithium-ion polymer 5.32 Wh (equivalent to 3.8 V / 1400 mAh)
- Battery charge time: 3 hours (5 V / 1 A)
- Music playtime: up to 12 hours (varies by volume level and audio content)
Product Usage Instructions
Bluetooth Pairing:
- Turn on the JBL Clip 5.
- Go to your device’s settings and select Bluetooth.
- Select “JBL Clip 5” from the list of available devices to pair.
Multi-Speaker Connection:
- Turn on the additional speaker.
- Enable the multi-speaker connection feature on both speakers.
Using the JBL PORTABLE App:
Download and install the JBL PORTABLE app on your device to configure the
speaker settings and perform software upgrades.
Charging:
When the battery is low, connect the provided charging cable to the speaker
for charging.
FAQ:
-
Q: How long does it take to charge the JBL Clip 5?
A: The battery charge time is approximately 3 hours using a 5V/1A charger. -
Q: What is the music playtime of the JBL Clip 5?
A: The music playtime is up to 12 hours, but this can vary based on the volume level and audio content being played.
WHAT’S IN THE BOX
BLUETOOTH PAIRING
PLAY
MULTI-SPEAKER CONNECTION
APP
CHARGING
CARABINER
WATERPROOF DUSTPROOF IP67
FACTORY RESET
TECH SPEC
- Transducer: 45 mm / 1.75″
- Output power: 7 W RMS
- Frequency response: 95 Hz – 20 kHz
- Signal-to-noise ratio: > 85 dB
- Battery type: Lithium-ion polymer 5.32 Wh (equivalent to 3.8 V / 1400 mAh)
- Battery charge time: 3 hours (5 V / 1 A)
- Music playtime: up to 12 hours (varies by volume level and audio content)
- Bluetooth® version: 5.3
- Bluetooth® profile: A2DP V1.4, AVRCP V1.6
- Bluetooth® transmitter frequency range: 2400 – 2483.5 MHz
- Bluetooth® transmitter power: ≤ 10 dBm (EIRP)
- Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
- Product dimensions (W x H x D): 86.30 x 134.50 x 46.0 mm / 3.4″ x 5.3″ x 1.8″
- Net weight: 0.285 kg / 0.628 lbs
- Packaging dimensions (W x H x D): 100.5 x 148 x 59 mm / 3.9″ x 5.8″ x 2.3″
- Gross weight: 0.39 kg / 0.86 lbs
- Maximum operation temperature: 45 °C
To protect battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Clip 5 to liquids without removing the cable connection.
Do not expose JBL Clip 5 to water while charging. It may result in permanent
damage to the speaker or power source.
Chemicals, salt or “foreign particles” in your pool or the ocean can damage
the waterproof seals or harm the connector surface over time if not rinsed off
after use. After a liquid spill or rinse, do not charge your speaker until
it’s completely dry and clean. Charging when wet might damage your speaker.
When using an external adapter, the output voltage/current of the external
adapter should not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>