JBL CLIP 5 Portable Waterproof Bluetooth Speaker User Guide
- July 9, 2024
- JBL
Table of Contents
**JBL CLIP 5 Portable Waterproof Bluetooth Speaker User Guide
**
WHAT’S IN THE BOX
BLUETOOTH PAIRING
APP
MULTI-SPEAKER CONNECTION
| |
---|---|---
Use the JBL PORTABLE
app for speaker configuration and
software upgrade.
CHARGING
CARABINER
WATERPROOF DUSTPROOF IP67
TECH SPEC
Transducer: 45 mm / 1.75”
Output power: 7 W RMS
Frequency response: 100 Hz – 20 kHz
Signal-to-noise ratio: > 85 dB
Battery type: Lithium-ion polymer 5.32 Wh (equivqlent to 3.8 / 1400 mAh)
Battery charge time: 3 hours (5 V / 1 A)
Music playtime: up to 10 hours (varies by volume level and audio content)
Bluetooth® version: 5.3
Bluetooth® profile: A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range: 2400 – 2483.5 MHz
To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Clip 5 to liquids without removing cable connection. Do not expose JBL Clip 5 to water while charging. It may result in permanent damage to the speaker or power source.
Chemicals, salt or “foreign particles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed o¬ after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean. Charging when wet might damage your speaker.
When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
B Z P 0 1 4 7 8 0 1
PA_JBL_Clip 5_QSG_Global_DV1_V3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>