eurolite NH-20 Tour Haze Machine User Manual

: June 13, 2024
: eurolite

Table of Contents

eurolite NH-20 Tour Haze Machine
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
OPERATING ELEMENTS AND CONNECTIONS
SETUP
- Filling up fog fluid
Operation
DMX CONTROL
CLEANING AND MAINTENANCE
PROTECTING THE ENVIRONMENT
TECHNICAL SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eurolite NH-20 Tour Haze Machine

D00147684, version 1.0, publ. 11/05/2023 For product updates, documentation, software and support please visit www.eurolite.de. You can find the latest version of this user manual in the product’s download section. © 2023 Eurolite. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Eurolite shall have no liability for any error or damage of any kind resulting from the use of this document. All trademarks mentioned herein are the property of their respective owners.

INTRODUCTION

Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is your connection to the world of show with an unparalleled variety of products, both for professionals and beginners. If you follow the instructions given in this manual, we are sure that you will enjoy this product for a long period of time. This user manual will show you how to install, set up and operate your new Eurolite product. Users of this product are recommended to carefully read all warnings in order to protect yourself and others from damage. Please keep this manual for future needs and pass it on to further owners.

Product features

Integration in a stackable flight case makes the DMX fazer tough, durable and easy to carry
Produces fine, translucent haze without nebulizing the room at the same time
Ideal for accentuating light and laser beams
Fog output adjustable via rotary control
QuickDMX connector for wireless DMX connection
DMX interface with 3-pin connectors
DMX settings via control panel with LED display
Auto temperature control
Removable tank
Operates on standard waterbased fluid

Package contents

Fog machine
Power cable
these instructions

Experience Eurolite.
Product videos, suitable accessories, firmware and software updates, documentation and the latest news about the brand. You will find this and much more on our website. You are also welcome to visit our YouTube channel and find us on Facebook.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage.

Intended use

This fog machine creates fog by vaporizing a special fog fluid. This device is designed for professional use in the field of event technology, e.g. on stage.
Only use the device according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by improper use or non-compliance with the safety instructions. In such cases, the warranty will be null and void.
Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the warranty invalid.

Danger due to electricity

The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly injure the user.
The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress.
Do not place any objects filled with liquids on the device.
Do not place any open sources of fire, such as burning candles, on or directly next to the device.
Make sure that objects cannot fall into the device, in particular metal parts.
Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.

Danger to children and people with restricted abilities

This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Warning – risk of injuries

Never drink fluid or use it on the inside or outside of a human body. If fluid gets in contact with skin or eyes, rinse thoroughly with water. If it is necessary call a doctor immediately.
Danger of explosion! Never add flammable liquids of any kind to the fog liquid.
Never aim the output nozzle directly at people or at open flames. Never aim the smoke at yourself, people or animals.
Never aim the smoke at power sockets or other objects that are powered by electrical current. You could damage them or even expose yourself to hazardous electric shocks.
Never aim the smoke at the device itself or at surfaces that are not heat resistant. Avoid direct skin contact with the smoke. Inappropriate use may cause burns due to high temperatures.
DANGER OF BURNING! Keep minimum distance of 50 cm to nozzle! Keep device upright.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.
When the fog machine is not in use for a longer period of time empty the entire smoke fluid from the machine before storing it.
Before filling the device disconnect from mains. Never fill in any hot liquids. Only use high-quality, water-based smoke fluid recommended by the manufacturer. Other smoke fluids may cause clogging. Always make sure there is sufficient smoke fluid in the fluid tank. Operating this smoke machine without smoke fluid will cause damage to the pump as well as over-heating of the heater.
Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the standards and rules that apply in your country.
For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.
If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.

Caution – material damage

Always make sure there is sufficient smoke fluid in the fluid tank. Operating this smoke machine without smoke fluid will cause damage to the pump as well as over-heating of the heater.
After operating the fog machine, the fluid ways must be flushed with distilled water. When fog fluid remains in the system and the fog machine is not operated, the fluid may lead to irreversible damages! This will make the warranty void.
If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until the condensation has evaporated.
Always store the device dry! Always drain the tank and please use the original packaging if the device is to be transported.
If a serial number label is affixed to the device, do not remove the label as this would make the warranty void.

OPERATING ELEMENTS AND CONNECTIONS

Output nozzle
Fan
Display and operating buttons
Output volume control
Circuit breaker
DMX512 connectors
QuickDMX port
Power input
Remote control connector
Tank

SETUP

Filling up fog fluid

WARNING!

Fluid handling Always disconnect from the mains before filling the machine. Only use water-based fluids. We recommend high-quality Eurolite fluids. Never add flammable liquids. If fluid gets inside the machine, have it checked by skilled personnel before it is operated.Open the cover at the ▼ mark and remove the tank. Then unscrew the tank cap and fill the tank with fog fluid. Tightly close the tank again and insert it into the device.

Placing the unit

Remove all packing materials from the shipping box. Make sure that there are no packing remnants at the fog output nozzle.
Install the device in a well-ventilated area. The operation in an insufficiently ventilated room can lead to a condensation of the fog fluid. The resulting slippery surface can cause accidents.
Keep a minimum distance of 20 cm around and above the device.
Only install the fog machine on scratch resistant and water resistant surfaces (inclination angle max. 15°).
Do not orientate the escape nozzle directly in the direction of the audience’s eyes. In order to create a good effect, there should be a distance between the device and the audience of at least 1.5 m.
All fog machines develop condensation around the output nozzle. Because this may result in some moisture accumulation on the surface below the output nozzle, consider this condensation when installing your unit.

Operation

CAUTION!

Operating conditions
Prior to transportation, allow the machine to cool down and completely empty the tank. Never operate the fog machine without fog fluid. Fire hazard due to overheating! Besides, the unit may be damaged. During operation, reduced fog output may occur. In this case the device is heating up again. After a short period, the machine will be ready to emit fog again. This process guarantees an appropriate vaporization temperature and the best fog emission possible. The temperature is regulated by a high-quality thermostat. The machine may sputter small amounts of fog occasionally during operation and for a minute or so after being turned off.

Prior to switching on, check the fluid level of the tank and fill up fog fluid, if required.
Connect the machine to the mains with the power plug.
The machine does not feature a power switch. When the machine is connected to the mains it is powered on and starts the warm-up process. The display indicates “HEAT”. While the machine is warming up, fog output will not be possible yet. Once the warm up process is completed, the display indicates the standard screen and and fog output will be possible; either via the rotary control, remote control or via DMX.

Adjusting the fog output volume
When the DMX cable is disconnected, you may use the VOLUME control to adjust the fog output volume: 0 = no output, 3 = maximum output. The display shows the current value.

Remote control operation (optional)
Connect the remote control to the REMOTE terminal. When the control indicator on the remote control lights up, fog output will be possible. Simply press the FOG button to emit fog, and press it again to stop.

DMX CONTROL

DMX512 controller

The unit features 3-pin XLR plugs for DMX connection.

Connect the output of your DMX controller to the DMX IN jack of the machine with a DMX cable.
Connect the DMX OUT jack of the machine to the DMX input of the next unit in the chain. Always connect one output to the input of the next unit until all units are connected.
At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between Signal (–) and Signal (+) in the DMX output of the last unit.
If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended to insert a DMX level amplifier to ensure proper data transmission.

QuickDMX wireless receiver
The device features an alternative DMX input for a QuickDMX receiver (sold separately). This connector allows for wireless transmission of DMX control signals to the device. The connector is designed as a USB port which provides the required 5 V operating voltage for the receiver. With QuickDMX devices, extensive cabling between the DMX controller and the device is not required.

DMX functions
For operation with a controller with DMX512 protocol, the machine is equipped with 2 control channels.

Channel	DMX value	Function
1	0–10	No fog output
11–255	Fog output in 3 steps (increasing)

Adjusting the DMX start address
When the machine is controlled via DMX signal, DMX mode is activated. The display indicates the current DMX start address. To ensure that the control signals are properly directed to the machine, it must be adjusted to the DMX start address provided for it on the DMX controller. Use the buttons ▲ and ▼ to set the address between 001 and 512. You may now start operating the machine via your DMX controller.

Note

Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX data link. If two, three or more devices are addressed similarly, they will work similarly.

CLEANING AND MAINTENANCE

NOTICE!
Maintenance conditions There are no serviceable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts.

CAUTION!
Transport conditions Prior to transportation, allow the machine to cool down and completely empty the fluid and water tank.

General cleaning
We recommend a frequent cleaning of the unit, in particular the output nozzle. Please use a soft lint-free and moistened cloth for the outside of the unit. Never use alcohol or solvents! Do not allow the fog liquid to become contaminated. Always replace the cap on the fog liquid container immediately after filling.

Cleaning the heating element
The heating element should regularly be cleaned every 40 operational hours in order to avoid clogging. It is recommended to run a cleaning solution composed of 80% distilled water and 20% white vinegar through the system.

Procedure:

Fill cleaning solution into empty fluid tank. Run the machine several times in a well-ventilated room. The number of repetitions depends on the pollution level of the vaporizing elements.
After use, empty all remaining cleaner and rinse the tank thoroughly.
The Eurolite fog fluids we recommend are non-hazardous to the environment and can be disposed of via the sewage system.

Fuse
The machine is fitted with a circuit breaker. In the unlikely event of overloading, the circuit breaker will automatically trip. It can be reset by pressing the BREAKER button with the machine unplugged.

Storage
It is recommended to operate the machine at least once a month with a warm-up period and a few minutes of fog emission. Prior to storage, run cleaning fluid through the system as described in the cleaning regimen above. This will help avoid any particles condensing inside the pump or heater.

PROTECTING THE ENVIRONMENT

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product. You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries. Disposing of them in the household waste is prohibited. You may return your used batteries free of charge to collection points in your municipality and anywhere where batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly, you contribute to the protection of the environment.