SoundPEATS A7 Pro Bluetooth Headset with Microphone User Guide

SoundPEATS A7 Pro Bluetooth Headset with Microphone

Pairing

For the first time to enter the pairing mode:

1. First press and hold the multi-function button on the side of the headset for l second to enter the power-on state, the blue light is always on for ls, and the headset is successfully turned on. When the indicator light of the headset flashes red and blue light alternately, the headset enters into pairing mode;
2. Turn on the device of your Bluetooth, then select SOUNDPEATS A7 Pro from the Bluetooth list to complete the pairing.

Enter pairing mode manually

At power-on or standby state, press and hold the volume+/- button on the side of the earbuds simultaneously for 3s until the indicator light of the earbuds fiashes red and blue light alternately, to let the earbuds enter into pairing mode manually.
Note: Only in pairing mode that the headset can be discovered by the device to establish a connection.

Two ways lo use

SOUNDPEATS A7 Pro can be paired with two devices at the same time use. When the headset and device A paired, turn off the Bluetooth on device A. Repeat the pairing operation to make the headset connect with device B, after a successful connection, turn on the Bluetooth of device A to complete the pairing.
Note: When connecting two devices, you can only play music from one of them, when you want to play music from the other device, you need to pause or turn off the music from the previous device. The same is true for calls.

Charging

When the battery voltage of the headset is lower than 3.3V, it will enter a low power state. At this time, the red indicator light of the headset flashes once every 5 minutes, indicating that the headset needs to be charged, Use the Type-C charging cable to charge, and the charging time is about 2 hours,
Note: The red indicator light of the headset is always on when charging, and the red indicator light of the headset is off when the earphone is fully charged.

Product Image

Control

the volume down button for 1s
NextTrack| Press a nd h o ld the v ol ume up button for Is
Answer / Hang Up Phone Coll| Single tap the MFB
Reject Phone Coll| Press a nd h o ld the MFB for Is
Lost Replay| Double tap the MFB
Mute the micropho n e| Tap the mute bu tt o n
Switch Between Tw o**

Calls

| Double tap the MFB
Manua lly Enter Pairing

Mode

| Press a nd h o ld the volume up/down button for 3s
Ac t ivate V o i ce Assistant| Press a nd h o ld the MFB for 2s

Q&A

Ql. What is the scenario when the headset is in reconnect mode?

1. After the headset is connected to the device once, turn on the headset and it will enter the reconnect mode.
2. The headset Is disconnected from the device In a certain Bluetooth range, and the headset will enter the reconnect mode for 3 minutes.

Q2. What is the pairing password?
If you are prompted to enter your password when connecting your device to the headset, try entering 0000, 8888, l l l l, or 1234.
Q3. What conditions does the headset charging device need to meet?
Meet the DC voltage 5V, current l A or more for example car charger, travel charger, computer USB, and other devices can be charged to the headset.
Q4. How to deal with the situation that the headset cannot be turned on due to some abnormality?

1. Ensure that the headset is fully charged, insert the charging cable to reset the headset, and it can be turned on normally after the reset is successful.
2. If it still cannot be used normally, you can seek technical support from customer service or the manufacturer.

Q5, Under what circumstances will the headset automatically switch off?

1. The battery voltage of the headset is lower than 3.1 V.
2. The headset automatically switches off when the headset fails to re-connect for 3 minutes over a Bluetooth range.

Q6. How does a three-way call work?

1. When there Is an Incoming call during a call, short press the MFB to answer the new call and hang up the current call;
2. When there is an incoming call during a call, double-click the MFB to answer the new call and keep the current call;
3. When there is an incoming call during a call, you can press and hold the MFB for 2 seconds to keep the current call and reject the new call;
4. During a three-way call, double-click the MFB to switch between the current call and the new call.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica­tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>