bathlife Tillra Laundry Mixer High Brass Instruction Manual
- June 13, 2024
- bathlife
Table of Contents
bathlife Tillra Laundry Mixer High Brass
Product Information
The product is called TILLRA and it is a mixer used for controlling the flow and temperature of water in a property. It is designed to be connected to the property’s pipe system and can be used in bathrooms or kitchens.
Product Usage Instructions
-
Before fitting the mixer, make sure to turn off the water supply.
-
Flush the pipes through to remove any foreign particles that could cause malfunctions in the mixer.
-
It is recommended to hire a professional tradesman to fit the mixer and connect it to the property’s pipe system.
-
Loosen the compression nipple/nut and carefully retighten it to prevent stress corrosion cracking. Verify that the cone is tightly fastened.
-
Once the mixer is installed, check all connections to ensure they are secure. Tighten if necessary.
-
If the tap drips even when it is turned off, the insert needs to be replaced.
- To replace the insert, refer to the instruction manual for detailed steps.
-
If the jet of water is uneven or weak, unscrew the flow straightener in the pipe and remove the small plastic insert.
- Soak the plastic insert in a solution of one part vinegar to three parts warm water for at least an hour.
-
To remove limescale stains, use a solution of one part vinegar to three parts warm water.
- Do not use chemical cleaning agents, acid-based or other
aggressive solutions, nor steel wool or similar products.
- Do not use chemical cleaning agents, acid-based or other
-
To prevent freezing during winter, drain the mixer of water completely.
- Leaving water in the mixer can damage the insert.
Turn off the water!
The pipes should be flushed through before the mixer is fitted. Bathlife bears
no responsibility for any malfunction caused by foreign particles in the
mixer. A professional tradesman should fit the mixer and connect it to the
property’s pipe system. Loosen the compression nipple/nut and carefully
retighten to inhibit stress corrosion cracking and verify that the cone is
tightly fastened. Once the mixer is installed, check to ensure that all
connections are secure, tighten if necessary
Installation instruction
Change cartridge
Troubleshooting FAQ
What do I do if the tap drips even when it is turned off?
The insert needs replacing. The jet is uneven or weak. Unscrew the flow
straightener in the pipe and remove the small plastic insert. Place it in a
solution of one part vinegar to three parts warm water for at least an hour.
How do I get rid of limescale stains?
Use a solution of one part vinegar to three parts warm water. Never use
chemical cleaning agents, acid-based or other aggressive solutions, nor steel
wool or similar products.
How do I make sure the mixers in our holiday home do not freeze during the
winter?
Drain the mixer of water completely, otherwise there is a risk of the insert
being damaged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>