westfalia K1100 Compressor Air Box 2.0 1100 Watt Instruction Manual

: June 13, 2024
: Westfalia

Table of Contents

westfalia K1100 Compressor Air Box 2.0 1100 Watt
Product Information
Product Usage Instructions
Overview
Safety
Start-Up and Operation
Cleaning and Maintenance
Technical Data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

westfalia K1100 Compressor Air Box 2.0 1100 Watt

Product Information

Product: Kompressor Air Box 2.0 1100 Watt K1100
Article Number: 94 17 82
Power: 1100 Watt
Language: English

Product Usage Instructions

Make sure the compressor is switched OFF and unplugged from the power supply before starting.
Ensure that the cord is not tangled or caught in any way.
Open the compartment with the power cord and connect it to a suitable power source.
Turn ON the compressor using the ON/OFF switch (1).
Attach the air hose and tyre filling adaptor from the compartment with the air hose and adaptor (2) to the object you want to inflate.
If needed, use the drawer with adaptors (3) to connect different types of valves or nozzles to the air hose.
Monitor the pressure and the object while inflating to prevent over-inflation and potential bursting.
When finished, switch OFF the compressor and disconnect it from the power supply.
Clean and maintain the compressor regularly as described in the user manual.

Dear Customers

The air compressor is equipped with a tyre filling adaptor with build-in air pressure gauge, several adaptors and a convenient carrying handle.You can use the compressor universally for pumping up car tyres,motorbike tyres and bicycle tyres. The compressor is also suitable for pumping up sport balls, inflatable toys or air beds. The maximum pressure is up to approx. 8 Bar. Please familiarize yourself with the proper usage of the device byreading and following each chapter of this manual, in the order presented. Keep these operating instructions for further reference.
Please read the safety notes!
These instructions will make it easier for you to handle the deviceappropriately and help prevent misunderstandings and possible damage or injury

Overview

ON/OFF Switch
Compartment with Air Hose and Tyre Filling Adaptor
Compartment with Air Hose and Tyre Filling Adaptor
Compartment with Power Cord
Tyre Filling Adaptor
Nozzle of the Air Blowout Gun
Ball Filling Needle
Small Adaptor for Air Beds, Beach balls and the Likes
Adaptor for Dunlop and Sclaverand Valves
Large Adaptor for Air Beds, Beach balls and the Likes
Adaptors for further Air-filled Objects
Base for the Adapters

Safety

Safety Notes

Please note the following safety notes to avoid malfunctions, damage or physical injury

Please read this manual carefully and use the compressor only according to this manual.
Wear ear protection when using the device.
Dispose of the packaging material or store it out of the reach of children. There is a danger of suffocation!
Persons with limited physical, sensorial or mental abilities are not allowed to use the device, unless they are supervised and briefed for their safety by a qualified person. Keep the device out of reach of children.
Make sure the cord cannot get caught in any way. Do not wind the cord around the unit and do not bend it.
Please switch OFF the unit and unplug from the power supply before cleaning, maintaining or when not in use.
Do not jam the cord or pull cord around edges. Do not pinch the power cord in any way and keep it away from hot surfaces. Do not wind the cord around the unit and do not bend it.
Make sure the voltage corresponds to the type label on the electric tool.
Do not allow liquids of any kind to enter the unit.
The compressor does not have an automatic turn-off. Too much pressure in the inflated object can burst it. Check and observe the pressure and the object while inflating.
Do not leave the compressor unattended while it is in operation.
Keep in mind that the pressure hose may become hot during operation. Caution! There is a danger of injury.
Check the achieved pressure with an air pressure gauge.
Do not expose the unit to high temperatures, strong vibration and humidity.
Do not use the compressor for more than 10 minutes continuously and allow it to cool down for at least 50 minutes. Otherwise, the compressor may overheat and become permanently damaged.
The compressor is not designed to inflate truck or tractors tyres. The compressor is intended for domestic use only and not for professional, continuous operation.
The unit is designed for operation in altitudes of up to 2000 m above sea level.
Should the unit become damaged do not use it any furtherand have it repaired by a professional or contact our customer service. Do not disassemble the unit or try repairing it yourself

Start-Up and Operation

Using the Air Compressor

The power cable, the air hose and the tyre filling adaptor (5) are stored in the compartments on the sides of the compressor, and the adaptors are in the drawer (3) under the handle. When the compressor is laid flat the drawer can be folded down over the handle after opening.
Check that the switch (1) is set to position „OFF“, so the unit is turned off.
Connect the compressor plug to a suitable wall socket
The included tyre filling adaptor (5) can be connected to the quick coupler onthe end of the air hose of the compressor. To disconnect, pull back the securing ring on the quick coupler.
The included adaptors (7 to 12) are suitable for different applications (e. g. football, volley ball, beach ball, inflatable bed, bicycle tube Dunlop and Sclaverand). Attach it to the quick coupler on the Tyre filling adaptor (5). Open the lever of the quick coupler and insert the desired adaptor in the valve extension. Release the lever to clamp the adaptor
Please observe Sclaverand valves have a locking ring which must be unscrewed to allow the valve to open. After filling the tyre to the desired pressure tighten the ring again.
You do not need an adaptor to inflate a motor vehicle tyre or a bicycle tyre with a Schrader valve. Attach the air pressure hose withthe quick coupler to the valve (press lever, insert quick coupler to the tyre valve, release lever). Make sure the coupler is turned as far aspossible onto the valve to be closed air-tight.
The tyre filling adaptor can be converted to an air blowout pistol. Unscrew the connection of the air filling hose on the tyre filler adaptor and replace the hose with the nozzle of the air blowout pistol (6).
Set the switch to the position „ON“, in order to switch on the compressor
Connect the tyre filling adaptor to the object to be filled. Press the trigger of the tyre filling adaptor. See the air pressure on the pressure manometer on the tyre filling adaptor (5). Hint: This gauge is not calibrated and we recommend before driving, check the air pressure with a calibrated air pressure manometer.
The quick coupler on the air hose of the compressor can be used to connect other devices which are suitable to be operated by the airflow and pressure the compressor can provide.

Hints

Do not inflate objects to a pressure for which they are not intended. Do not pump up larger objects such as lorry tyres, tractor tyres or inflatable boats. These exceed the permissible operating range of the compressor account of the long pumping time. In such a case use an inflator to complete the desired air.
Please keep in mind that smaller items such as volley- or footballs are filled very quickly. Always check the pressure and read the operating notes by the manufacturer for these objects.
Do not leave the compressor unattended while it is in operation.
Do not use the compressor for more than 10 minutes continuously and allow it to cool down for at least 50 minutes.

Cleaning and Maintenance

Before undertaking any cleaning or maintenance, please pull the power plug and allow the unit to fully cool down
Use only a damp cloth to clean the unit. Do not use aggressive chemicals or abrasives.

Technical Data

Power Supply: 230 V~ / 50 Hz
Nominal Power: 1100 W
Operation / cool Down Time: max. 10 min., cool down for 50 min.
Intake Capacity: 180 l/min
Operating Pressure: 8 Bar
Protection Type: IP20
Air Hose: 3 m
Power Cable: 3 m
Weight: 6 Kg
Dimensions: (H x W x D) 39 x 37.5 x 14 cm

Compressor “Air Box” 2.0 1100 Watt K 1100

Artikel Nr. 94 17 82
Article No. 94 17 82
2011/65/EU
- Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)
2014/30/EU
- EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1, EN 61000-3-3:2013+A1
2006/42/EC
- Machinery EN 1012-1:2010, EN 62841-1:2015

Customer Services

Deutschland

Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de

Österreich

Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at

Schweiz

Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet:

Disposal

Dear Customer,
Please help avoiding refuse. If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the garbage bin, but check with your local council for recycling facilities in your area