MARVEL AGES 6+ Spider Man Kid Safe True Wireless Earbuds Instruction Manual
- June 13, 2024
- Marvel
Table of Contents
MARVEL AGES 6+ Spider-Man Kid Safe True Wireless Earbuds
INSTRUCTION MANUAL
Thank you for purchasing the Kid Safe True Wireless Earbuds. This manual provides more information about the wireless earbuds, Please read the instructions before using.
Product Overview
- Wireless Earbuds
- Portable Charging Case
Package Contents
- 1(0ne)PalrEarbuds1 .2in.x0.Bin.x0.7in.(3.1cmx2.0cmx1 .8cm)each
- 1(One)PortableCharglngCase2.1in. x 2.1in. x 1.1in. (5.3cm x 5.3cm x 2.9cm)
- 1(0ne) USB-C Charging Cable 11 .Bin. (30cm)
- 1(0ne)instruction manual
Specifications
- Driver Diameter: 13 mm
- Playtime: 10 Hours
- Impedance: 32 Ohms
- Charging nme: 2 Hours
- Frequency Response: 20Hz-20kHz
- Bluetooth Range: 32.8 Feet
- Sensitivity: < 85dB
- Bluetooth version: 5.3
- Power Supply: Li-ion Battery 3. 7V 30 mAh Per Earbud
- Charging Case Battery Capacity: 250 mAh
- USB-C Charging Cable Included
Power On/Off
Power On
Press and hold down the On/Off Button of earbuds for 3 seconds and the LED
will flash.
Power Off
Press and hold down the On/Off Button of the earbuds for 5 seconds and the LED
will tum off.
Pair the wireless earbuds with your mobile device
- Keep the distance between the earbuds and mobile device within 32.8 feet.
- De-activate the Bluetooth function on your mobile device.
- The protective stickers must be removed from the earbuds and put the earbuds back to charging case before use. Take earbuds out from charging case and wait for 3 to 5 seconds for auto pairing. One of the earbuds will be blinking in white, another earbud will stop blinking when auto pairing is done successfully.
- Activate the Bluetooth function on your mobile device and select “KIDSAFE TWS” from the list shown.
- After pairing is successful, both earbuds will stop blinking.
Attention: If the auto pairing is not successful, manual pairing between earbuds is essential by following below procedures:
- Make sure the earbuds are charged.
- De-activate the Bluetooth function on your mobile device. (if you had been paired the earbuds to some other mobile device(s) nearby, please sure to de-activate those device(s) too).
- Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device before this operation.)
- Activate the Bluetooth function on your mobile device and select “KIDSAFE TWS” from the list shown.
- After pairing successfully, both earbuds will stop blinking.
Reconnect the wireless earbuds to your mobile device
When powered on, the wireless earbuds will automatically connect with the last
successfully paired device.
Disconnect the wireless earbuds from your mobile device
- Power off the wireless earbuds; or
- Switch off the Bluetooth on your mobile phone; or
Leave the earbuds 60ft away from your mobile phone or further.
Answer Reject a call
- When receive a call, press the On/Off Button once (on either earbud) to accept the call, or answer the call normally via your mobile phone.
- Press and hold 2 secnnds to reject it.
End a call
- To end the call, just press On/Off button at any side of earbud with Beep sound to end it.
Functions
- Pause / Play Music: Short Press on On/Off Button
- Go back to the previous song: Double click left On/Off Button.
- Advance to the next song: Double click right On/Off Button.
- Voice Assistant: Press and hold On/Off Button for 2 seconds.
For your safety, please always use appropriate 5V output charger/Adapter to charge the product.
DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the
- Use the USB Type-C charging cable provided with the packaging.
- Connect the USB Type-C plug to USB Type-C charging port on the charging czse, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
- The portable charging case LED Will be flashing during charge.
- Once fully charged, the portable charging case LED will be stop flash.
- The portable charging case LED will be on during the earbuds are put back to the case and will be off after 5 minutes.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the charging case and earcuffs if it has been not used for more than 6 months.
CAUTION : The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product.
Charging your Earbuds
- Open the charging case cnver.
- Insert the earbuds into the charging case.
- The earbuds will start fre charge automatically.
- LED indicator light Of the earbuds Will on when charging.
- Once fully charged, the LED will off.
FAQ
If the wireless earbuds cannot be paired with your please try the following:
- Ensure that your earbuds are in pairing or recnnnection mode
- Ensure that Bluetooth search function of your mobile device is activated.
If the wireless earbuds will not turn on:
Make sure the earbuds are fully charged.
Can I change the battery for the earbuds?
The wireless earbuds use a built-in non-detachable battery which cannot be
If the charging case cannot be recharged:
If you use a power outlet, ensure that the supply is securely and the outlet
works. If you use a computer, ensure that it is cnnnected and the USB port is
powered.
Safety instructions for the lithium battery and charging the
- The input voltage to the is 5V IA.
- In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the
- Only charge the prcxiuct at ambient temperatures 100C/ 500F and 400C/1040F.
- Do not heat above 700C/1580F, Do not to sunlight or throw into fire.
- Switch off the after use.
- Please note that we won’t take any respnsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of and we control the proæss during the time the user using this product.
- In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC STATEMENT
This device with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- This deviæ may not cause harmful interference.
- This deviæ must acæpt any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party ræponsible for complianæ could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not and in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenæ will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encnuraged to try to cnrrect the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation tmveen the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an radio/TV technician for help.
RF warning statement:
The device has evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
FCC ID: 2ADM5-EP-0699
All relevant information for future reference
Class 1 LED product
ITEM# EP-0699
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia,
PA 19106
Made in China
Date : 04 Aug 2023
Product : EP-0699 IM
Size : 222.75(W} x 1 OS(H}mm