DALCNET 25618 SLIM CBU DALI User Manual
- June 13, 2024
- DALCNET
Table of Contents
**DALCNET 25618 SLIM CBU DALI User Manual
**
FEATURES
- CONVERTER+CASAMBI+DALI+0/1-10V
- Input: 230Vac
- Command: CASAMBI APP
- Signal converter from Casaba to DALI
- Signal converter from Casaba to 0/1-10V
- Possibility to control DALI or 0/1-10V devices via the Casaba APP
- Provides power supply to the DALI bus.
- Extended temperature range
- 100% Functional test – 5 year warren
PRODUCT DESCRIPTION
SLIM-CBU-DALI is a Casaba to DALI converter or Casaba to 0/1-10V signal. The device receives a command signal from the Casaba APP and converts it into a DALI or 0/1-10V command according to the selected fixture. Send DT6 and DT8 commands or analog commands from 0 to 10V. See the following table “TYPE OF PROFILES” for the reference of the Casaba-DALI conversion addresses.
The CASAMBI APP can be downloaded free of charge from the Apple App Store and the Google Play Store.
-
For the regularly updated manual, consult our website:www.dalcnet.com or QR Code
-
For the correct functioning of the CASAMBI APP, consult the forum on the Casaba website:
https://support.casambi.com/support/home
PRODUCT CODE
CODE| POWER SUPPLY| INPUT COMMAND| OUTPUT COMMAND| TYPE
OF LOCAL COMMAND
---|---|---|---|---
SLIM-CBU-DALI| 230Vac| APP CASAMBI| DALI (DT6-DT8)1| N° 1 N.O. Push Button
OVP| Over voltage protection| ✔
---|---|---
IFP| Input fuse protection| ✔
PROFILE NAME| # PROFILE| DESCRIPTION
---|---|---
**DALI2 BROADCAST* **| **25618 (Default)| Dimmer broadcast
DALI.DALI dimming curve: logarithmic. Set the power-on level to the maximum
level (100% – 254). No addressing is required.
0/1-10V 1CH| 29126| One channel dimmer: – Analog output for
controlling devices 0/1-10V
****W AUTOMATIC| ** 30407| One channel dimmer: – Dimmer
1: address A0 DALI dimming curve: logarithmic. Set the power-on level to the
maximum level (100% – 254). The address is automatically assigned to the
device if needed
**WWWW AUTOMATIC| ** 30408| Four channels
dimmer:
- Dimmer 1: address A0
- Dimmer 2: address A1
- Dimmer 3: address A2-
- Dimmer 4: a ddress A3 DALI dimming curve: logarithmic. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
**TW AUTOMATIC 2700-6000K| ** 30409| Two channels dimmer:-
- Dimmer 1: address A0 – Warm White-
- Dimmer 2: address A1 – Cool White DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
**RGB AUTOMATIC| ** 30410| Three channel dimmers.-
- Dimmer 1: address A0 – Red-
- Dimmer 2: address A1 – Green-
- Dimmer 3: address A2 – Blue DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
**RGB+W AUTOMATIC| ** 30411| Four channel dimmers.-
- Dimmer 1: Red
- Dimmer 2: Red
- Dimmer 3: Blu
- Dimmer 4: White DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
**RGB+TW AUTOMATIC| ** 30412| Five-channel dimmer.-
- Dimmer 1: Red
- Dimmer 2: Green
- Dimmer 3: Blu
- Dimmer 4: Warm white
- Dimmer 5 : Cold white DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
*The Device is certified as DALI2 only with the profile: 25618 – DALI2 BROADCAST
PROFILE NAME | # PROFILE | DESCRIPTION |
---|
WWWW GROUP
|
30416
| Four DALI groups, dimmer function.
- Dimmer 1: group G0
- Dimmer 2: group
- Dimmer 3: group G2
- Dimmer 4 : group G3 DALI dimming curve: logarithmic. Set the power-on level to the maximum level (100% – 254).The address must be assigned to the device using a DALI Master device.
TW GROUP
|
30417
| Two DALI groups, dimmer function.
- Dimmer 1: group G0 – Warm White
- Dimmer 2: group G1 – Cool White DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254).The address must be assigned to the device using a DALI Master device.
RGB GROUP
|
30418
| Three DALI groups, dimmer function.
- Dimmer 1: group G0 – Red
- Dimmer 2: group G1 – Green
- Dimmer 3: group G2 – Blue DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254).The address must be assigned to the device using a DALI Master device.
RGB+W GROUP
|
30419
| Four DALI groups, dimmer function
- Dimmer 1: group G0 – Red
- Dimmer 2: group G1 – Green
- Dimmer 3: group G2 – Blue
- Dimmer 4: group G3 – White Set the power-on level to the maximum level (100% – 254).The address must be assigned to the device using a DALI Master device
RGB+TW GROUP
|
30420
| Four DALI groups, dimmer function
- Dimmer 1: group G0 – Red
- Dimmer 2: group G1 – Green
- Dimmer 3: group G2 – Blue
- Dimmer 4: group G3 – Warm white
- Dimmer 4: group G3 – Cold white DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254).The address must be assigned to the device using a DALI Master device
8xW GROUP
|
30421
| Eight DALI groups, dimmer function.
- Dimmer 1: group G0
- Dimmer 2: group G1
- Dimmer 3: group G2
- Dimmer 4: group G3
- Dimmer 5: group G4
- Dimmer 6: group G5
- Dimmer 7: group G6
- Dimmer 8: group G7 DALI dimming curve: logarithmic. Set the Power on Level to the maximum level (100% – 254).The address must be assigned to the device using a DALI Master device
DALI DT8 CB TW
|
30425
| 1 Address to control 2 TW channels. Send DALI DT8 BROADCAST commands for devices that support the “Color Temperature Tc” function: Dim Level and Color Temperature. DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). No addressing is required.
DALI DT8 CB RGB
|
30426
| 1 address to control 3 RGB channels. Send DALI DT8 BROADCAST commands for devices that support the “RGBWAF color- type” function: Dim and RGBWAF.DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). No addressing is required.
DALI DT8 CB RGB+W
|
30427
| 1 address to control 3 RGB channels. Send DALI DT8 BROADCAST commands for
devices that support the “RGBWAF color- type” function: Dim and RGBWAF.DALI
dimming curve: linear. Set the power-on level to the maximum level (100% –
254). No addressing is required.
DALI BC DT8 DIM TO WARM| 30428| 1 Address to control 2 TW channels. DALI
dimming curve: linear. Set the power-on level to the maximum level (100% –
254).No addressing is required.
DALI BC DT8 XY| 30429| DALI DT8 multi-channel dimmer supporting ‘XY’
color type control
DALI BC DT8 XY-TW| 30430| DALI DT8 multi-channel dimmer supporting ‘XY-
TW’ color type control
REFERENCE STANDARDS
IN 55015| Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment
---|---
IN 61547| Equipment for general lighting purposes – EMC immunity
requirement
IN 61347-1| Lamp Control gear – Part 1: General and safety requirement
IN 61347-2-11| Lamp Control gear – Part 2-11: Particular requirement for
miscellaneous electronic circuits used with luminaires
TECHNICAL SPECIFICATIONS
| SLIM-CBU-DALI
---|---
Supply voltage 2| 230Vac
Voltage range| 100 … 240 Vac
Mains frequency| 50/60Hz
Nominal power @230V 2| 3W max
Power loss in standby mode| <500mW
Operating Frequencies| 2402 – 2480 MHz
Maximum output power 3| 7dBm
Storage temperature 3| Min: -40°C Max: +60°C
Ambient temperature, Ta Range 2| Min: -25°C Max: +60°C
Type of connector| Push-In terminals
Wiring| Solid size| 0,2 ÷ 1,5 mm2 / 24 ÷ 16 AWG
Stranded size
Wire strip length| 9 ÷ 10 mm
Protection class| IP20
Casing material| Plastic
Packaging units (pieces/units)| 1pcs
Mechanical dimensions| 136 x 29 x 21 mm
Packaging dimensions| 147 x 34 x 29 mm
Weight| 62 g
| BUS DALI
---|---
I Output (Only for DALI) 4| 30mA
V Output (Only for DALI) 4| 14V
| 0/1-10V ANALOG OUTPUT
---|---
0-10V – Sink current or Source| 10mA
1-10V – Sink current or Source| 10mA
WIRING DIAGRAM **
**
Follow the steps below for product installation as shown in the connection diagram.
- Installation and maintenance must only be performed by qualified personnel in compliance with current regulations.
- Installation and maintenance must be performed in the absence of voltage. The power supply must be protected. The product must be protected by a suitably sized circuit breaker.
- Connect the normally open button to the PUSH terminals with the symbol ” ”. Make sure not to connect live parts to the PUSH terminals.
- Connect the DALI BUS to the “DALI” terminals or connect the 0/1-10V signal to the “OUT 0-10/1-10V” terminals following the polarity “+” and “- “
- Connect the power cables to the “AC IN” terminals
Like any other product with Bluetooth control, be sure not to place the product inside a metal case or placed near large metal structures. The metal will significantly obstruct the radio signal, which is crucial for the proper functioning of the device.
LOCAL COMMANDS OPERATION
BUTTON COMMAND NORMALLY OPEN5
The Casaba app allows you to program the local command with some prearranged functions.
N° Push Button| Functions| |
---|---|---|---
1| Controls a luminaire| Click Long press (>1s)| Tap to turn a luminaire
on or off – hold to adjust luminaire brightness
Controls an element| Click Long press (>1s)| Tap to turn a device element on
or off – hold to adjust the element value
Control a group| Click Long press (>1s)| Tap to turn a group on or off – hold
to adjust brightness
Control scene| Click Long press (>1s)| Tap to turn a scene on or off – hold to
adjust scene brightness
Control all luminaires| Click Long press (>1s)| Tap to turn all luminaires on
or off – hold to adjust brightness
Cycles scenes| Click Long press (>1s)| Tap to cycle through the list of scenes
– hold to adjust current scene brightness
Active/Standby| ClickLong press (>1s)| Tap to switch between two scenes – hold
to adjust current scene brightness
For all other functions, please refer to the CASAMBI APP document at:
https://support.casambi.com/support/home
UNPAIR DEVICE FROM THE CASAMBI NETWORK
If the device is already connected to a network for which you don’t have the
credentials and you wish to associate it with a new
network, please follow the instructions provided in the Casambi APP’s “Nearby
Devices” section.
Once the decoupling sequence has started, switch off the main power supply of
the Power Supply connected to the SLIM-CBUDALI and switch it on again within 1
– 2 seconds.
If you do the procedure too quickly, the decoupling may not work properly. Repeat the uncoupling sequence, allowing an extra 1 or 2 seconds to pass between the instant in which the main power supply of the Power Supply is switched off and on again6 .
A second method to decouple the product is to connect an N.O. to an “INPUT” input of the SLIM-CBU-DALI and during the uncoupling procedure press the button.
MECHANICAL DIMENSIONS
DALI MAP ADDRESSES
“AUTOMATIC” FIXTURE CONFIGURATION:
The “AUTOMATIC” Fixtures automatically direct the UNADDRESSED devices connected to the DALI BUS.
DALI2 BROADCAST
Casaba Slider
Dimmer
Address| Command
---|---
BROADCAST| Dimmer ALL
0/1-10V AUTOMATIC
Casaba Slider
Dimmer
Address| Command
---|---
1 Channel| 0/1-10V
W AUTOMATIC
Casambi Slider
Dimmer
Address| Command
---|---
A0| Dimmer 0
WWWW AUTOMATIC
Casambi Slider
Dimmer 0
Dimmer 1
Dimmer 2
Dimmer 3
Address| Command
---|---
A0| Dimmer 0
A1| Dimmer 1
A2| Dimmer 2
A3| Dimmer 3
TW AUTOMATIC 2700 – 6000K
Casambi Slider
Dimmer
Color temperature
Address| Command
---|---
A0| Warm white
A1| Cold white
RGB AUTOMATIC
Casambi Slider
Dimmer
Color
Saturation
Map
Address| Command
---|---
A0| R – Red
A1| G – Green
A2| B – Blue
RGB+W AUTOMATIC
Casambi Slider
Dimmer
White / Color
Color
Saturation
Map
Address| Command
---|---
A0| R – Red
A1| G – Green
A2| B – Blue
RGB+TW AUTOMATIC
Casambi Slider
Dimmer
White / Color
Color
Saturation
Map
Address| Command
---|---
A0| R – Red
A1| G – Green
A2| B – Blue
A3| W – White
WWWW GROUP
Casambi Slider
Group 0
Group 1
Group 2
Group 3
Address| Command
---|---
G0| Group 0
G1| Group 1
G2| Group 2
G3| Group 3
TW GROUP 2700 – 6000
Casambi Slider
Dimmer
Color temperature
Address| Command
---|---
G0| Warm White group
G1| Cool White Group
**RGB GROUP
**
Casambi Slider
Dimmer
Color
Saturation
Map
Address| Command
---|---
G0| Red group
G1| Green Group
G2| Blue Group
**RGB+W GROUP
**
Casambi Slider
Dimmer
White / Color
Color
Saturation
Map
Address| Command
---|---
G0| Red group
G1| Green Group
G2| Blue Group
G3| White Group
RGB+TW GROUP
Casambi Slider
Dimmer
Color temperature
White / Color
Color
Saturation
Map
Address| Command
---|---
G0| Red group
G1| Green Group
G2| Blue Group
G3| Warm White group
G4| Cool White Group
8W GROUP
Casambi Slider
Group 0
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
Group 7
Address| Command
---|---
G0| Group 0
G1| Group 1
G2| Group 2
G3| Group 3
G4| Group 4
G5| Group 5
G6| Group 6
G7| Group 7
DALI DT8 BC TW 2700 – 6000K
Casambi Slider
Dimmer
Color temperature
Address| Command
---|---
Broadcast| DT8 Dimming + CCT
DALI DT8 BC RGB
Casambi Slider
Dimmer
Color
Saturation
Map
Address| Command
---|---
Broadcast| DT8 Dimming + RGB
DALI DT8 BC RGB+W
Casaba Slider
Dimmer
White / Color
Color
Saturation
Map
Address| Command
---|---
Broadcast| DT8 Dimming + RGBW
DALI DT8 BC RGB+TW
Casambi Slider
Dimmer
Color temperature
White / Color
Color
Saturation
Map
Address| Command
---|---
Broadcast| DT8 Dimming + RGBTW
DALI DT8 XY
Casambi Slider
Dimmer
X
Y
Address| Command
---|---
Broadcast| DT8 Dimming XY
DALI DT8 XY+TW
Casambi Slider
Dimmer
Color temperature
X
Y
Address| Command
---|---
Broadcast| DT8 Dimming XY+TW
TECHNICAL NOTES
INSTALLATION
- Isolate the mains supply before installing the product.
- Installation and maintenance must be performed in the absence of voltage.
- Installation and maintenance must only be performed by qualified personnel in compliance with current regulations.
- The product must be installed inside an electrical panel protected against overvoltage.
- The product must be protected by a suitably sized fuse and/or circuit breaker.
- The product must be installed in a vertical or horizontal position with the faceplate/label facing up or vertically; no other positions are allowed. The bottom-up position (with front panel/label down) is not allowed.
- Use in thermally harsh environments may limit the output power.
- Keep 230V (LV) circuits and non-SELV circuits separate from safety extra-low voltage (SELV) circuits and all connections to this product. It is absolutely forbidden to connect for any reason, directly or indirectly, the 230V mains voltage to the bus or to other parts of the SELV circuit.
COMMAND AND OUTPUT
- The length of the connection cables between the local controls (N.O. Push Button, 0-10V, 1-10V or other) and the product must be less than 10m. The cables must be sized correctly and must be isolated from any wiring or non-SELV live parts. It is recommended to use double insulated cables, if deemed appropriate also shielded.
- All devices and control signals connected to the local “N.O. Push Button or other” with the symbol, must not supply any type of voltage.
- The length and type of bus connection cables (DALI or other) must comply with what is defined by the specifications of the respective protocols and current regulations. They must be isolated from any wiring or non-SELV voltage parts. It is recommended to use double insulated cables
- All devices and control signals connected to the buses (DALI or other) and to local commands (0-10V, 1-10V or other) must be of the SELV type (the connected devices must be SELV or in any case provide a SELV signal).
FOR CASAMBI/BLE PRODUCTS:
- ATTENTION: in order not to compromise and jeopardize the correct functioning of the device, the device must not be shielded in any way and/or installed inside metal or aluminum boxes or near metal structures. Like any other Casaba product, it should not be placed in a metal container or next to large metal structures. The metal will effectively block all radio signals which are critical to the product’s operation.
WARNINGS
- To guarantee the best performance and the most recent functions made available by Casaba, make sure you have installed the latest version of the Casaba APP on your device.
- If the Casaba APP requires it, upgrade the FW version of the installed device. This guarantees the latest features and innovations available.
- To guarantee the best performance and correct functioning to the end user, a functional test is carried out on 100% of the devices. If the device has remained associated with the Dulcet test network, please uncouple the device by following the information given in the Casaba APP and in the paragraph “UNPAIRING THE DEVICE FROM THE CASAMBI NETWORK”
DALCNET S.r.l.
36077 Alta villa Vicentine (VI) – Italy
Via Lago di Garda, 22
Phone +39 0444 1836680
www.dalcnet.com –
info@dalcnet.com
Rev. 11/07/2023 – Pg.15/15
References
- Led dimmer and RGB controller for professional lighting systems
- Led dimmer and RGB controller for professional lighting systems
- Support : Support