DALCNET SLIM-CBU-DALI Signal Converter Casambi Owner’s Manual

September 9, 2024
DALCNET

SLIM-CBU-DALI Signal Converter Casambi

“`html

Specifications:

  • Product Name: SLIM-CBU-DALI
  • Origin: Italy
  • Input: 230Vac
  • Command: CASAMBI APP
  • Output: DALI (DT6-DT8) or 0/1-10V
  • Extended temperature range
  • 100% Functional test

Product Description:

SLIM-CBU-DALI is a Casambi to DALI converter or Casambi to
0/1-10V signal. It receives commands from the Casambi APP and
converts them into DALI or 0/1-10V commands for the selected
fixture. It allows control of DALI or 0/1-10V devices via the
Casambi APP.

Usage Instructions:

1. Installation:

Follow the installation guidelines provided in the manual.
Ensure proper wiring and connections.

2. Setup:

Download the CASAMBI APP from the Apple App Store or Google Play
Store. Follow the instructions on how to pair the device with the
app.

3. Configuration:

Refer to the TYPE OF PROFILE table in the manual for
Casambi-DALI conversion addresses. Configure the device based on
your specific requirements.

4. Operation:

Use the CASAMBI APP to send commands to the SLIM-CBU-DALI for
controlling DALI or 0/1-10V devices. Ensure proper power supply for
the DALI bus.

5. Maintenance:

Regularly check for updates on the manufacturer’s website for
any new features or improvements.

FAQ:

Q: Where can I download the CASAMBI APP?

A: The CASAMBI APP can be downloaded from the Apple App Store or
Google Play Store free of charge.

Q: How can I manage addresses in the DALI variant?

A: Address management in the DALI variant depends on the
configuration of the Casambi module. Refer to the manual for more
details.

Q: What protections does the SLIM-CBU-DALI offer?

A: The device offers Over Voltage Protection (OVP) and Input
Fuse Protection (IFP).

“`

SLIM-CBU-DALI
Device Manual

Made in Italy

FEATURES

FIXTURE ID 25618

CONVERTER+CASAMBI+DALI+0/1-10V Input: 230Vac Command: CASAMBI APP Local command: N.O. Push button Signal converter from Casambi to DALI Signal converter from Casambi to 0/1-10V Possibility to control DALI or 0/1-10V devices via the Casambi APP Provides power supply to the DALI bus. Extended temperature range 100% Functional test

PRODUCT DESCRIPTION

SLIM-CBU-DALI is a Casambi to DALI converter or Casambi to 0/1-10V signal. The device receives a command signal from the Casambi APP and converts it into a DALI or 0/1-10V command according to the selected fixture. Send DT6 and DT8 commands or analog commands from 0 to 10V. See the following table “TYPE OF PROFILES” for the reference of the Casambi-DALI conversion addresses.
The CASAMBI APP can be downloaded free of charge from the Apple App Store and the Google Play Store.
For the regularly updated manual, consult our website:www.dalcnet.com or QR Code For the correct functioning of the CASAMBI APP, consult the forum on the Casambi website: https://support.casambi.com/support/home

PRODUCT CODE

CODE

POWER SUPPLY INPUT COMMAND OUTPUT COMMAND

SLIM-CBU-DALI

230Vac

APP CASAMBI

DALI (DT6-DT8)1

Address management (DALI variant) depends on the configuration of the Casambi module

TYPE OF LOCAL COMMAND N° 1 N.O. Push Button

PROTECTIONS

OVP Over voltage protection

IFP Input fuse protection

1 Address management depends on the configuration of the Casambi module.
DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.1/16

SLIM-CBU-DALI
Device Manual

TYPE OF PROFILE

PROFILE NAME DALI2 BROADCAST* 0/1-10V 1CH W AUTOMATIC
WWWW AUTOMATIC
TW AUTOMATIC 2700-6000K RGB AUTOMATIC
RGB+W AUTOMATIC
RGB+TW AUTOMATIC

PROFILE 25618

(Default) 29126 30407
30408
30409
30410
30411
30412

DESCRIPTION
Dimmer broadcast DALI. DALI dimming curve: logarithmic. Set the power-on level to the maximum level (100% – 254). No addressing is required.
One channel dimmer: – Analog output for controlling devices 0/1-10V
One channel dimmer: – Dimmer 1: address A0
DALI dimming curve: logarithmic. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed
Four channels dimmer: – Dimmer 1: address A0 – Dimmer 2: address A1 – Dimmer 3: address A2 – Dimmer 4: address A3
DALI dimming curve: logarithmic. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
Two channels dimmer: – Dimmer 1: address A0 ­ Warm White – Dimmer 2: address A1 ­ Cool White
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
Three channel dimmers. – Dimmer 1: address A0 ­ Red – Dimmer 2: address A1 ­ Green – Dimmer 3: address A2 ­ Blue
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
Four channel dimmers. – Dimmer 1: Red – Dimmer 2: Red – Dimmer 3: Blu – Dimmer 4: White
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.
Five-channel dimmer. – Dimmer 1: Red – Dimmer 2: Green – Dimmer 3: Blu – Dimmer 4: Warm white – Dimmer 5: Cold white
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address is automatically assigned to the device if needed.

*The Device is certified as DALI2 only with the profile: 25618 ­ DALI2 BROADCAST

Made in Italy

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.2/16

PROFILE NAME WWWW GROUP TW GROUP RGB GROUP RGB+W GROUP RGB+TW GROUP
8xW GROUP

SLIM-CBU-DALI
Device Manual

Made in Italy

PROFILE 30416 30417 30418 30419 30420

30421

DESCRIPTION
Four DALI groups, dimmer function. – Dimmer 1: group G0 – Dimmer 2: group G1 – Dimmer 3: group G2 – Dimmer 4: group G3
DALI dimming curve: logarithmic. Set the power-on level to the maximum level (100% – 254). The address must be assigned to the device using a DALI Master device.
Two DALI groups, dimmer function. – Dimmer 1: group G0 ­ Warm White – Dimmer 2: group G1 ­ Cool White
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address must be assigned to the device using a DALI Master device.
Three DALI groups, dimmer function. – Dimmer 1: group G0 ­ Red – Dimmer 2: group G1 ­ Green – Dimmer 3: group G2 ­ Blue
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address must be assigned to the device using a DALI Master device.
Four DALI groups, dimmer function – Dimmer 1: group G0 ­ Red – Dimmer 2: group G1 ­ Green – Dimmer 3: group G2 ­ Blue – Dimmer 4: group G3 ­ White
Set the power-on level to the maximum level (100% – 254). The address must be assigned to the device using a DALI Master device
Four DALI groups, dimmer function – Dimmer 1: group G0 ­ Red – Dimmer 2: group G1 ­ Green – Dimmer 3: group G2 ­ Blue – Dimmer 4: group G3 ­ Warm white – Dimmer 4: group G3 ­ Cold white
DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). The address must be assigned to the device using a DALI Master device
Eight DALI groups, dimmer function. – Dimmer 1: group G0 – Dimmer 2: group G1 – Dimmer 3: group G2 – Dimmer 4: group G3 – Dimmer 5: group G4 – Dimmer 6: group G5 – Dimmer 7: group G6 – Dimmer 8: group G7
DALI dimming curve: logarithmic. Set the Power on Level to the maximum level (100% – 254). The address must be assigned to the device using a DALI Master device

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.3/16

SLIM-CBU-DALI
Device Manual

Made in Italy

PROFILE NAME DALI DT8 CB TW
DALI DT8 CB RGB
DALI DT8 CB RGB+W
DALI BC DT8 DIM TO WARM DALI BC DT8 XY DALI BC DT8 XY-TW

PROFILE 30425

30426
30427
30428 30429 30430

DESCRIPTION
1 Address to control 2 TW channels. Send DALI DT8 BROADCAST commands for devices that support the “Colour Temperature Tc” function: Dim Level and Color Temperature. DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). No addressing is required.
1 address to control 3 RGB channels. Send DALI DT8 BROADCAST commands for devices that support the “RGBWAF colourtype” function: Dim and RGBWAF. DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). No addressing is required.
1 address to control 3 RGB channels. Send DALI DT8 BROADCAST commands for devices that support the “RGBWAF colourtype” function: Dim and RGBWAF. DALI dimming curve: linear. Set the power-on level to the maximum level (100% – 254). No addressing is required.
1 Address to control 2 TW channels. DALI dimming curve: linear. Set the power- on level to the maximum level (100% – 254). No addressing is required.
DALI DT8 multi-channel dimmer supporting ‘XY’ color type control
DALI DT8 multi-channel dimmer supporting ‘XY-TW’ color type control

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.4/16

SLIM-CBU-DALI
Device Manual

Made in Italy

REFERENCE STANDARDS

IN 55015
IN 61547 IN 61347-1 IN 61347-2-11

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Equipment for general lighting purposes ­ EMC immunity requirement Lamp Control gear ­ Part 1: General and safety requirement Lamp Control gear ­ Part 2-11: Particular requirement for miscellaneous electronic circuits used with luminaires

TECHNICAL SPECIFICATIONS

Supply voltage2 Voltage range Mains frequency Nominal power @230V2 Power loss in standby mode Operating Frequencies Maximum output power3 Storage temperature3 Ambient temperature, Ta Range2 Type of connector
Wiring
Wire strip length Protection class Casing material Packaging units (pieces/units) Mechanical dimensions Packaging dimensions Weight

Solid size Stranded size

SLIM-CBU-DALI 230 Vac
100 … 240 Vac 50/60 Hz 3 W max <500 mW
2402 ­ 2480 MHz 7dBm
Min: -40°C Max: +60°C Min: -25°C Max: +60°C
Push-In terminals
0,2 ÷ 1,5 mm2 / 24 ÷ 16 AWG
9 ÷ 10 mm IP20 Plastic 1pcs
136 x 29 x 21 mm 147 x 34 x 29 mm
62 g

I Output (Only for DALI)4 V Output (Only for DALI)4

BUS DALI Guaranteed current to the bus = 30mA / Max bus current = 250mA
14V

0-10V ­ Sink current or Source 1-10V ­ Sink current or Source

0/1-10V ANALOG OUTPUT 10mA 10mA

2 Maximum value, dependent on ventilation conditions. 3 The parameters are derived from the configuration of the Casambi module. 4 The SLIM-CBU-DALI has an integrated DALI power supply. Before connecting the SLIM-CBU-DALI to a DALI line, please make
sure that no other DALI power Supply is powering the bus.

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.5/16

WIRING DIAGRAM

SLIM-CBU-DALI
Device Manual

Made in Italy

Follow the steps below for product installation as shown in the connection diagram. Installation and maintenance must only be performed by qualified personnel in compliance with current regulations. Installation and maintenance must be performed in the absence of voltage. The power supply must be protected. The product must be protected by a suitably sized circuit breaker.

Connect the normally open button to the PUSH terminals with the symbol ”

“. Make sure not to connect live parts

to the PUSH terminals.

Connect the DALI BUS to the “DALI” terminals or connect the 0/1-10V signal to the “OUT 0-10/1-10V” terminals following

the polarity “+” and “- ”

Connect the power cables to the “AC IN” terminals

Like any other product with Bluetooth control, be sure not to place the product inside a metal case or placed near large metal structures. The metal will significantly obstruct the radio signal, which is crucial for the proper functioning of the device.

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.6/16

SLIM-CBU-DALI
Device Manual

Made in Italy

LOCAL COMMANDS OPERATION

BUTTON COMMAND NORMALLY OPEN5

The Casambi app allows you to program the local command with some prearranged functions.

N° Push Button Functions

Controls a luminaire

Click Long press (>1s)

Tap to turn a luminaire on or off ­ hold to adjust luminaire brightness

Controls an element

Click Long press (>1s)

Tap to turn a device element on or off ­ hold to adjust the element value

Control a group

Click Long press (>1s)

Tap to turn a group on or off ­ hold to adjust brightness

1

Control scene

Click Long press (>1s)

Tap to turn a scene on or off ­ hold to adjust scene brightness

Control all luminaires Click Long press (>1s)

Tap to turn all luminaires on or off ­ hold to adjust brightness

Cycles scenes

Click Long press (>1s)

Tap to cycle through the list of scenes ­ hold to adjust current scene brightness

Active/Standby

Click Long press (>1s)

Tap to switch between two scenes ­ hold to adjust current scene brightness

For all other functions, please refer to the CASAMBI APP document at: https://support.casambi.com/support/home

UNPAIR DEVICE FROM THE CASAMBI NETWORK
If the device is already connected to a network for which you don’t have the credentials and you wish to associate it with a new network, please follow the instructions provided in the Casambi APP’s “Nearby Devices” section. Once the decoupling sequence has started, switch off the main power supply of the Power Supply connected to the SLIM-CBUDALI and switch it on again within 1 ­ 2 seconds.
If you do the procedure too quickly, the decoupling may not work properly. Repeat the uncoupling sequence, allowing an extra 1 or 2 seconds to pass between the instant in which the main power supply of the Power Supply is switched off and on again6.
A second method to decouple the product is to connect an N.O. to an “INPUT” input of the SLIM-CBU-DALI and during the uncoupling procedure press the button.

5 By default, the button is set as “Control a lamp” 6 The discharge time of the power supply secondary depends on the construction characteristics of the power supply used.

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.7/16

SLIM-CBU-DALI
Device Manual
MECHANICAL DIMENSIONS

Made in Italy

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.8/16

SLIM-CBU-DALI
Device Manual
DALI MAP ADDRESSES
“AUTOMATIC” FIXTURE CONFIGURATION: The “AUTOMATIC” Fixtures automatically direct the UNADDRESSED devices connected to the DALI BUS.

Made in Italy

DALI2 BROADCAST
Casambi Slider Dimmer

Address BROADCAST

Command Dimmer ALL

0/1-10V AUTOMATIC
Casambi Slider Dimmer

Address 1 Channel

Command 0/1-10V

W AUTOMATIC
Casambi Slider Dimmer

Address A0

Command Dimmer 0

WWWW AUTOMATIC
Casambi Slider Dimmer 0 Dimmer 1 Dimmer 2 Dimmer 3
DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Address A0 A1 A2 A3

Command Dimmer 0 Dimmer 1 Dimmer 2 Dimmer 3

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.9/16

SLIM-CBU-DALI
Device Manual

TW AUTOMATIC 2700 – 6000K
Casambi Slider Dimmer Color temperature

Address A0 A1

Made in Italy
Command Warm white Cold white

RGB AUTOMATIC
Casambi Slider Dimmer Color Saturation Map
RGB+W AUTOMATIC
Casambi Slider Dimmer White / Color Color Saturation Map
RGB+TW AUTOMATIC
Casambi Slider Dimmer Color temperature White / Color Color Saturation Map

Address A0 A1 A2

Command R ­ Red G ­ Green B ­ Blue

Address A0 A1 A2 A3

Command R ­ Red G ­ Green B ­ Blue W ­ White

Address A0 A1 A2 A3 A4

Command R ­ Red G ­ Green B ­ Blue WW ­ Warm White CW ­ Cool White

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.10/16

SLIM-CBU-DALI
Device Manual

Made in Italy

FIXTURE “GROUP” CONFIGURATION:
With Fixture “Group” send group commands. To be correctly controlled by these Fixtures, the SLAVE devices must first be addressed and assigned to the desired group via a DALI Master.

WWWW GROUP
Casambi Slider Group 0 Group 1 Group 2 Group 3

Address G0 G1 G2 G3

Command Group 0 Group 1 Group 2 Group 3

TW GROUP 2700 – 6000
Casambi Slider Dimmer Color temperature

Address G0 G1

Command Warm White group Cool White Group

RGB GROUP
Casambi Slider Dimmer Color Saturation Map
RGB+W GROUP
Casambi Slider Dimmer White / Color Color Saturation Map
DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Address G0 G1 G2

Command Red group Green Group Blue Group

Address G0 G1 G2 G3

Command Red group Green Group Blue Group White Group

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.11/16

RGB+TW GROUP
Casambi Slider Dimmer Color temperature White / Color Color Saturation Map
8W GROUP
Casambi Slider Group 0 Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7

SLIM-CBU-DALI
Device Manual
Address G0 G1 G2 G3 G4
Address G0 G1 G2 G3 G4 G5 G6 G7

Made in Italy
Command Red group Green Group Blue Group Warm White group Cool White Group
Command Group 0 Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.12/16

SLIM-CBU-DALI
Device Manual

Made in Italy

FIXTURE CONFIGURATION “DT8 BC”:

The “DT8 BC” fixture send broadcast commands to device compliant with IEC 62386-209 ­ “Device Type 8”.

DALI DT8 BC TW 2700 – 6000K
Casambi Slider Dimmer Color temperature

Address Broadcast

Command DT8 Dimming + CCT

DALI DT8 BC RGB
Casambi Slider Dimmer Color Saturation Map
DALI DT8 BC RGB+W
Casambi Slider Dimmer White / Color Color Saturation Map
DALI DT8 BC RGB+TW
Casambi Slider Dimmer Color temperature White / Color Color Saturation Map
DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Address Broadcast

Command DT8 Dimming + RGB

Address Broadcast

Command DT8 Dimming + RGBW

Address Broadcast

Command DT8 Dimming + RGBTW

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.13/16

DALI DT8 XY
Casambi Slider Dimmer X Y

SLIM-CBU-DALI
Device Manual

Made in Italy

Address Broadcast

Command DT8 Dimming XY

DALI DT8 XY+TW
Casambi Slider Dimmer Color temperature X Y

Address Broadcast

Command DT8 Dimming XY+TW

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.14/16

SLIM-CBU-DALI
Device Manual

Made in Italy

TECHNICAL NOTES
INSTALLATION: · CAUTION: The product may only be connected and installed by qualified personnel. All applicable regulations, legislation, and building codes in force in the respective countries must be observed. Incorrect installation of the product can cause irreparable damage to the product and the connected LEDs. Pay attention when connecting the LEDs: polarity reversal results in no light output and often damages the LEDs. · Isolate the mains supply before the installation or adjusting the device. Installation and maintenance must be performed in the absence of AC Voltage. · The product must be installed inside a switchgear/controlgear cabinet and/or junction box protection against overvoltage. · If required, the product must be protected by a suitably sized fuse. · The external supply must be protected. The product must be protected by a properly sized Miniature Circuit Breaker (MCB) with overcurrent protection. · The product must be installed in a vertical or horizontal position with the label/top cover facing upwards or vertically. Other positions are not permitted. The bottom position is not permitted (label/top cover facing down). · Keep separated 230Vac (LV) circuits and not SELV circuit from safety extra low voltage (SELV) circuit. · It is absolutely forbidden to connect, for any reason, directly or indirectly, the 230Vac mains voltage to the BUS terminals. · If required, the product must be dissipated correctly. · Use the product in harsh environments could limit the output power. · For built-in components inside luminaires, the ta ambient temperature range is a guideline given for the optimum operating environment. However, integrator must always ensure proper thermal management (i.e. correct mounting of the device, air flow etc.) so that the tc point temperature does not exceed the tc maximum limit in any circumstance. Reliable operation and lifetime are only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use. · The SLIM-CBU-DALI has an integrated DALI power supply. Before connecting the SLIM-CBU-DALI to a DALI line, please make sure that no other DALI power Supply is powering the bus.
COMMAND and OUTPUT · The length of the cables connecting between the local commands (0-10V, 1-10V or other) and the product must be less than 25m. The cables must be properly dimensioned and must be insulated from any non-SELV wiring or voltage. It is recommended to use double insulated cables, if deemed appropriate also shielded. · The length and type of cables connecting to the bus (DALI or other) must comply with the specifications of the respective protocols and the regulations in force. They must be insulated from any wiring or non-SELV voltage parts. It is recommended to use double insulated cables. · ALL device and control signal connected to the local command “N.O. Push button, potentiometer o other” with symbol they must not supply any type of voltage. · ALL device and control signal connect at the BUS (DALI or other) and to the local command (0-10V, 1-10V or other) must be SELV type (the device connected must be SELV or supply SELV signal). · It is recommended a length of the connecting cables between the product and the LED module less than 25m. The cables must be properly dimensioned. It is recommended to use double insulated cables.
FOR CASAMBI/BLE PRODUCTS: ATTENTION: in order not to compromise and jeopardize the correct functioning of the device, the device must not be shielded in any way and/or installed inside metal or aluminium boxes or near metal structures. Like any other Casambi product, it should not be placed in a metal container or next to large metal structures. The metal will effectively block all radio signals which are critical to the product’s operation.
WARNINGS
To guarantee the best performance and the most recent functions made available by Casambi, make sure you have installed the latest version of the Casambi APP on your device.
If the Casambi APP requires it, upgrade the FW version of the installed device. This guarantees the latest features and innovations available.
To guarantee the best performance and correct functioning to the end user, a functional test is carried out on 100% of the devices. If the device has remained associated with the Dalcnet test network, please uncouple the device by following the information given in the Casambi APP and in the paragraph “UNPAIRING THE DEVICE FROM THE CASAMBI NETWORK”.

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.15/16

SYMBOLOGIES

SLIM-CBU-DALI
Device Manual

Made in Italy

All products are manufactured in compliance with European Directives, as reported in the EU Conformity Declaration.
Independent lamp Controlgear: lamp controlgear consisting of one or more separate elements so designed that it can be mounted separately outside a luminaire, with protection according to the marking of the lamp controlgear and without any additional enclosure
At the end of its useful life the product described in this datasheet is classified as waste from electronic equipment, and cannot be disposed together with the municipal undifferentiated solid waste. Warning! Incorrect disposal of this product may cause serious damage to the environment and human health. Please be informed about the correct disposal procedures for waste collecting and processing provided by local authorities.

DALCNET S.r.l. 36077 Altavilla Vicentina (VI) ­ Italy Via Lago di Garda, 22

Phone +39 0444 1836680 www.dalcnet.com ­ info@dalcnet.com
Rev. 19/01/2024 – Pg.16/16

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals