Brook Wingman FGC Converter for PS5 Fighting Game User Guide
- June 13, 2024
- Brook
Table of Contents
Brook Wingman FGC Converter for PS5 Fighting Game
Product Usage Instructions
- Ensure that you have a PC connected to the internet.
- Download the update file from the Brook website: www.brookaccessory.com
- Hold down the side buttons on the converter and plug it into your PC.
- Click on the “START” button.
- Do not disconnect the converter during the update process.
- A screen will be shown indicating that the update has successfully finished.
- If the firmware update fails, a screen will show instructing you to redo the setup from the beginning. It is recommended to visit the Brook website and download the update file again before restarting the update.
This document describes how to update the firmware of Brook Wingman FGC.
NOTE: The update must be done on a PC; it cannot be done on a console.
NOTE: Make sure your PC is connected to the internet.
NOTE: You may try to disable antivirus, or run the program as
administrator.
Using Instructions
- STEP 1: Download the update file from “Download” on Brook website:
- STEP 2: Hold down the side buttons on the converter and plug it into PC.
- STEP 3: Click START
- STEP 4: DO NOT disconnect during the update process
- STEP 5: The following screen will be shown when the update has successfully finished.
- STEP 6: In case firmware update fails, the following screen will show, and please try to redo the setup from the beginning. We recommend that you visit our website www.brookaccessory.com and download the update file again before restarting the update.
Scan
© Brook All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>