Immax NEO PRO Intelligent Friendly Light User Manual

: June 13, 2024
: immax

Table of Contents

TECHNICAL SPECIFICATIONS
LED INDICATOR AND BUTTON
SENSOR INSTALLATION
IMMAX NEO PRO APP DOWNLOAD AND REGISTRATION
PAIRING THE PRODUCT TO THE APP
SAFETY INFORMATION
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Immax NEO PRO Intelligent Friendly Light User Manual

TECHNICAL SPECIFICATIONS

Communication protocol Zigbee: 3.0
Frequency: 2400MHz – 2483.5MHz
Maximum RF output power: ZigBee:10dBm – max 19dBm
Wireless range: 30m direct line of sight, 10m in built-up area
Detection technology: 24GHz-24.25GHz radar
Maximum RF output power: radar: 7.6dBm
Illumination detection range: 0 – 10,000 lux
Power port: USB C
Sensor input voltage: 5V 1A (adapter not included)
Standby power (Pnet): 0.5W
3M adhesive tape attachment
Operating temperature: -0°C to +40°C
Operating humidity: 95% maximum
Degree of protection: IP20
Certifications: CE
Dimensions: 50x27mm
Weight: 65g

Package contents: occupancy sensor, magnetic holder, USB C cable (2m), user manual

LED INDICATOR AND BUTTON

Reset: Long press the button to reset the sensor and put it into pairing mode
Network search: the LED flashes slowly in blue (3 minutes)
Motion detection: LED flashes blue every 5 seconds
Pressing the button: when the button is pressed, the LED turns blue
Error: the LED flashes red

SENSOR INSTALLATION

First select the installation height, preferably 1 m above the ground. If it is not possible to install the sensor at 1 m, it is recommended to install it in a higher position (not exceeding 2 m) while adjusting the angle of inclination so that the sensed area is well covered by the signal from the sensor.

Note: 1. If there are swaying green plants, moving metal objects, billowing curtains, clothing, running air conditioners, fans, and other distractions within the sensingrange, the sensor may misinterpret them as the human body. If there are vibrations or shocks at the installation site, they may also be incorrectly evaluated as human body. To ensure long-term normal use, we recommend that the sensor be installed in a dry environment.

IMMAX NEO PRO APP DOWNLOAD AND REGISTRATION

Scan the QR code to download the Immax NEO PRO app

Or search for and install the Immax NEO PRO app in the App Store or Google Play.

Launch the Immax NEO PRO app and tap “Register” to create your own account.
When you have completed registration, log in with your account.

PAIRING THE PRODUCT TO THE APP

Connect the sensor to the power adapter.
If the LED indicator on the sensor does not flash, press the button on the sensor for a minimum of 5 seconds.
Make sure that the LED indicator on the sensor flashes rapidly.
Everything is ready for pairing.
Open the Immax NEO PRO app.
Click on the “Room” icon.
Click on the “+” icon to add a new device.
In the left column, select the Immax NEO category.
Select a sensor (zigbee) or Other zigbee devices from the available products.
Select the smart gateway you want to pair this device with (note: this is necessary if you have more than one Immax NEO PRO smart gateway).
Click on the “Next Step” icon.
Confirm that the Led indicator is blinking rapidly
Click on the “Next Step” icon.
Wait until the device is properly paired with the Immax NEO PRO smart gateway.
Enter the name of the device.
Select the room where you want the device to be located.
Click on “Done”.

SAFETY INFORMATION

CAUTION: Keep out of reach of children. This product contains small parts, which
may cause suffocation or injury if swallowed.

WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:

Do not use different brands and types of batteries in the same device
When replacing the batteries, always replace all the batteries in the device
Do not use rechargeable or reusable batteries.
Do not allow children to insert batteries without supervision.
Follow the battery manufacturer’s instructions for proper battery handling and
disposal.

CAUTION: The product and batteries should be disposed of at a recycling centre.
Do not dispose of them with normal household waste.

CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.

CAUTION: Do not disassemble the product, electric shock may occur.

CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage. CAUTION: Follow the instructions in the enclosed manual.

MAINTENANCE

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.

DO NOT USE solvents or other aggressive cleaners or chemicals. A Declaration of Conformity has been issued for this product. More information can be found at www.immax.eu

If you have any questions or need advice, please contact us at support@immax.eu

Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz | www.immaxneo.com
Made in P.R.C.
Symbol