Beltroad G15 Pet Bell GPS Tracker User Guide

Beltroad G15 Pet Bell GPS Tracker

Scan the either QR code to download tracking APP, first is “GPS365” (Pro) , second is “365GPS” (Lite)

• Tracking Web: www.365gps.net
• Android APP: 365GPS(default) / GPS365
• iOS APP: 365GPS(default) / GPS365
• Login ID: IMEI number (15 digits sticker on the device) Default password: the last 6 digits of imei

Main feature:

• Network: GSM 850/900/1800/1900MHz, GPRS Class 12
• High level waterproof case and durable anti-scratch engineering ABS housing
• Positioning modes: GPS + AGPS + Wifi(optional) + LBS
• Tracking System: APP + Web + SMS command
• Track + Historical Trace Playback + Geo-Fence
• GPS location accuracy: within 10 meters outdoor(may be affected by the environment)
• Wifi location accuracy: within 50 meters(optional for some models)
• LBS location accuracy: above 100 meters
• Working Temperature: -20℃～45℃/ Humidity: 5%～95%
• Dimension and Weight:
  • G15 size: D=36.8*H=36.8mm
  • G15 weight: about 24g (without accessories)
• Ultra small size and light weight for all pet dog/cat/birds..ect

Preparation work

1.  Please prepare a nano SIM card which support both GSM and GPRS network, turn off PIN code.
   Note:

   • The tracker consumes about 30MB GPRS data per month.
   • GPRS data featured sim card is preferred
   • If your local 3G/4G sim card is compatible with GSM/GPRS network, it can be used for our tracker as well

2. Download and install our free mobile APP in your phone.

Power on the GPS and make GPS online

Reference Photo as below:

Open the GPS tracker cover and Insert the SIM card

• Power On: long press power key for 3seconds(red LED will light up and blinking after 2 seconds)
• Power off: long press for 9 seconds (red LED with light up then off )

Attention:
After the GPS tracker power on for 2 minutes with red LED blinking, you may meet the following conditions:

• Condition A: if the red LED blinking slow, that means GPS is online, please use APP GPS365/ PC web to track it directly.
• Condition B: if the yellow LED blinking fast, please send SMS command “”imei#” first, then check as following:
  a: If the GPS tracker response your phone with correct 15 digits imei #, then please send SMS command to set APN:

Attention: sim card from different telecom operators come with different APN parameters, you can put the sim card in your phone to get the correct APN parameter

APN settings: “APN#parameter#account#password# If your GPS sim card doesn’t have an account and password, then send “APN#parameter#” only.
If the tracker doesn’t respond to your phone with 15 digits IMEI No., please power off the tracker and test the sim card from other telecom operators.

Close the top cover

Attention: Please close the top cover tightly to keep waterproof

LED lights

Red LED blinking indication:

• Slow blinking: GPS tracker GPRS data is getting through with server, it’s online in APP/Web/Server
• Fast blinking: Invalid SIM/ Without SIM/ GPS tracker offline long brighting: Battery recharging
• LED off: Power off/ LED was turned off in APP/ Sleeping mode

Login the GPS tracker in APP/Web

Scan the QR code or input the IMEI # to login the APP. Login ID: IMEI number ( 15digits )

Password: the last 6 digits of imei

Main Functions

• GPS positioning: when the GPS tracker stay outdoor/good GPS satellite signal environment,a accurate GPS location
• Wifi positioning: when indoor device will capture the wifi router MAC address and take the MAC address as location.
• LBS positioning: when both GPS and wifi signal are not available for the device, it will give you a general location according to the nearest GSM signal tower around it.the city, the LBS location accuracy will be much more accurate than that stay in the countryside.
• Remind: you can turn off LBS/GPS location function to save battery if it’s necessary.Also Power/on by Alarm setting
  in this page to save battery.

Playback and Geo-fence

• 5b1: Playback:
  Please choose the start time and end time and other options in the APP to check the historical trace of your GPS tracker and show it on the map as below.

• 5b2: Geo-fence:
  You can set a security range for your pet on the map in your app, once your GPS tracker out of the preset safe range, you will get alarm.
  Please enable “Push Notification” and “Vibration alarm” in the setting menu, if someone moved your GPS tracker, the tracker will send vibration alarm push message to your phone timely.

Related SMS commands

• Inquire IMEI No.: “imei# ”
• Restore default password: “pwrst”
• Restore to the factory settings: “1122”
• Set Upload interval:
  • “time#minute”(minute range 1-120minute)；
  • “md#second”(second range 10-60seconds)
• Turn on/off LED: “LED#on , LED#off” APN settings: “APN#parameter#account#password#”
• Remote Restart: “sysrst”
• Vibration Alarm: “6666#on# / 6666#off#”
• Heartbeat Packet Time: heartbeat#No.#(no.=second)
• Turn off GPRS data and location function: link#0#
• Turn on GPRS data and location function: link#1#
• Control Auto Power On/Off: “pwonoff#day,hour,minute#day,hour,minute”
  (for example: pwonoff#0,0,10#0,2,0 — mean: the GPS tracker will work for 10 minutes then power off and after 2 hours later it will power on automatically again.)

References

• 365gps.net

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>